Absorption Peak Wavelength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AbsorptionPeakWavelength- Type
- Class, Characteristic
- altLabel
- absorption peak
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Wavelength
A property denoting wavelength of UV–Vis absorption maxima (e.g., porphyrin Soret/Q bands, peaks observed in solid-state/solution).
Mappings
- skos:broadMatch
http://www.bioassayontology.org/bao#BAO_0000565 (wavelength)
AC Input Amplitude
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ACInputAmplitude- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
Magnitude of the sinusoidal electrical excitation applied when acquiring an impedance-based strain-sensing signal, with the excitation quantity identified as voltage or current and the amplitude convention identified as peak, peak-to-peak, or root-mean-square.
ACAmplitude
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ACAmplitude- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
An electrical characteristic specifying the amplitude of an alternating electrical excitation, with the controlled electrical quantity and amplitude convention stated explicitly.
Accelerated Stress Test Voltage Cycling
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcceleratedStressTestVoltageCycling- Type
- Class, Measurement
- altLabel
- AST; accelerated stress testing; voltage cycling
Operational accelerated stress test process that cycles cell voltage between defined limits in order to assess fuel-cell durability under controlled operating conditions.
Accelerating Voltage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcceleratingVoltage- Type
- Class, Characteristic
- altLabel
- SEM operating voltage; TEM accelerating voltage; acceleration voltage
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential
http://qudt.org/vocab/quantitykind/ElectricPotential
Electric potential difference through which charged particles are accelerated in an instrument, including the electron beam in an electron microscope or the electron beam incident on an X-ray tube target.
Acetic Acid Solution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AceticAcidSolution- Type
- Class, Matter
- altLabel
- acetic acid
Diluted acetic acid used as peptiser for pseudo-boehmite.
Acetone
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Acetone- Type
- Class, Matter
- altLabel
- acetone (nitrogen source mixture component); acetone mixing solvent; acetone solvent
Acetone used as component of ink solvent (50 vol.% in acetone:isopropanol mixture).
Acetonitrile
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Acetonitrile- Type
- Class, Matter
Acetonitrile (CH₃CN), a polar aprotic organic compound containing a nitrile group and used as a solvent.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_38472 (acetonitrile)
Acetylene Black Carbon Black
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcetyleneBlackCarbonBlack- Type
- Class, Matter
- altLabel
- AB; Acetylene Black; Shawinigan acetylene black
Carbon black type (acetylene black) used as carbon powder in MPL inks.
Acid Doped PAAPVA Hydrogel
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidDopedPAAPVAHydrogel- Type
- Class, Matter
- altLabel
- acid-doped PAA/PVA
PAA/PVA hydrogel electrolyte after doping with aqueous sulfuric acid; used as thin-film electrolyte/binder.
Acid Doping
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidDoping- Type
- Class, Manufacturing
- altLabel
- phosphoric acid doping
Process of doping cross-linked PAA/PVA films by immersion in sulfuric acid solution to tune ionic strength.
Mappings
- skos:broadMatch
https://w3id.org/nfdi4cat/voc4cat_0000015 (doping)
Acid Doping Level
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidDopingLevel- Type
- Class, Characteristic
- altLabel
- ADL; PA-doping level; PA_dop
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstanceRatio
A property denoting phosphoric-acid doping level of PBI/PIM membrane (mol PA per mol repeat unit).
Acid Etching Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidEtchingProcess- Type
- Class, Manufacturing
- altLabel
- acid etching
Acid washing/etching step to remove Fe species (6 M HCl, repeated).
Acid Etching Repetitions
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidEtchingRepetitions- Type
- Class, Characteristic
- altLabel
- etch repetitions
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying acid etching repetitions under the conditions and reference basis stated with the record.
Acid Leached Steam Activated Fe NC Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidLeachedSteamActivatedFeNCCatalyst- Type
- Class, Matter
- altLabel
- acid-leached steam-activated Fe-N-C
Steam-activated Fe-N-C after oxalic acid leaching to remove Fe3O4, followed by reheating.
Acid Leaching Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidLeachingProcess- Type
- Class, Manufacturing
- altLabel
- acid leaching; acid–leaching method; oxalic acid leaching
Process to generate silica nanosheets from vermiculite by acid treatment.
Acid Mass Uptake Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidMassUptakeRatio- Type
- Class, Characteristic
- altLabel
- mass uptake ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting fractional mass increase upon acid doping measured by QCM (Δm/m0); used to estimate acid uptake.
Acid Treatment Of CCM
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidTreatmentOfCCM- Type
- Class, Manufacturing
- altLabel
- acid-treated CCM
A material-processing operation in which a catalyst-coated membrane is contacted with an acid solution to change its ionic form, remove soluble residues, or modify its membrane or electrode material.
Acid Uptake Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidUptakeDataset- Type
- Class, Data
- altLabel
- acid uptake data
Dataset of QCM-measured mass uptake and derived proton concentration vs dopant concentration.
Mappings
- skos:broadMatch
http://purl.obolibrary.org/obo/T4FS_0000347 (dataset) - skos:broadMatch
http://purl.org/spar/fabio/Dataset (dataset) - skos:broadMatch
http://semanticscience.org/resource/SIO_000089 (dataset)
Acid Uptake Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidUptakeMeasurement- Type
- Class, Measurement
- altLabel
- PA uptake measurement
Measurement of phosphoric acid uptake and acid doping level (ADL) by mass difference.
Acid Uptake Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidUptakeWeightPercent- Type
- Class, Compatibility
- altLabel
- Acid uptake (wt%); acid uptake
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFractionPercent
A property denoting acid uptake weight percent and determined in Acid Uptake Measurement.
Acid Value
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidValue- Type
- Class, Characteristic
- altLabel
- acidity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting acid value and determined in Acid Base Titration Measurement.
Acid-base titration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcidBaseTitrationMeasurement- Type
- Class, Measurement
- altLabel
- Acid Base Titration Measurement; acid-base titration
A composition measurement in which an acidic or basic titrant is added to determine the amount or concentration of a complementary basic or acidic analyte.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/process#AFP_0001510 (acid-base titration)
Acoustic Frequency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AcousticFrequency- Type
- Class, Characteristic
- altLabel
- sonication frequency; ultrasonic frequency
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A frequency characteristic specifying the repetition rate or oscillation frequency associated with acoustic.
Mappings
- skos:broadMatch
http://emmo.info/emmo#EMMO_852b4ab8_fc29_4749_a8c7_b92d4fca7d5a (Frequency) - skos:broadMatch
http://www.w3.org/ns/ssn/systems/Frequency (Frequency)
Activated Carbon
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ActivatedCarbon- Type
- Class, Matter
- altLabel
- AC; activated carbon (Norit SX Ultra); activated carbon control
Activated carbon used as benchmark cathode catalyst / base cathode material.
Activated Sludge
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ActivatedSludge- Type
- Class, Matter
- altLabel
- AS
Activated sludge mixed with buffer (50:50) used as MFC anolyte/catholyte medium in performance tests.
Mappings
- skos:broadMatch
http://purl.obolibrary.org/obo/ENVO_00002044 (sludge)
Activated Sludge Volume Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ActivatedSludgeVolumePercent- Type
- Class, Characteristic
- altLabel
- AS %; activated sludge % in volume
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
Percentage of the preparation volume represented by activated-sludge inoculum, calculated as its added volume divided by the sum of the component volumes before mixing and multiplied by 100.
Activation Mechanism Time Scale
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ActivationMechanismTimeScale- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic that represents activation mechanism time scale for a material, component, process, measurement, or hydrogen-electrochemical system.
Additive A
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AdditiveA- Type
- Class, Compatibility
Commercial dispersant additive added to catalyst ink to improve dispersion stability; amount not specified.
Adhesion Tape Test Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AdhesionTapeTestMeasurement- Type
- Class, Measurement
- altLabel
- tape peel test
Qualitative adhesion evaluation of Cu patterns on PET via adhesive tape test.
Adsorbed Aggregate Lateral Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AdsorbedAggregateLateralSize- Type
- Class, Characteristic
- altLabel
- aggregate size (AFM); lateral size; lateral size of adsorbed aggregates
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting adsorbed aggregate lateral size and determined in Atomic Force Microscopy Measurement.
Mappings
- skos:broadMatch
https://openenergyplatform.org/ontology/oeo/OEO_00340068 (size) - skos:broadMatch
https://saref.etsi.org/saref4inma/Size (Size)
Adsorption measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AdsorptionMeasurement- Type
- Class, Measurement
A characterization measurement that determines uptake, surface area, porosity, or interaction behavior from adsorption or desorption data.
Aemion Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AemionIonomer- Type
- Class, Matter
- altLabel
- AemionTM; AemionTM HNN5-00-X; alkaline ionomer
Hydrocarbon anion-exchange ionomer (iodide form) used as binder/ion conductor in GDE catalyst layer (supplier: Ionomr). Not found in ontology; add as specific ionomer type.
AFM Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AFMInstrument- Type
- Class, Instrument
- altLabel
- AFM (NanoMan VS; Agilent 5500 AFM microscope; Multimode 8 AFM (Bruker); atomic force microscope
An atomic force microscopy instrument used for in-situ or ex-situ topography and microstructure imaging of catalyst layers, membranes, and related electrochemical materials.
Mappings
- skos:broadMatch
http://purl.obolibrary.org/obo/MS_1000463 (instrument) - skos:broadMatch
https://w3id.org/polymat/Instrument (Instrument) - skos:broadMatch
https://w3id.org/skgo/modsci#Instrument (Instrument)
AFM Scan Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AFMScanSpeed- Type
- Class, Compatibility
- altLabel
- AFM line scan rate; scan speed
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency | http://qudt.org/vocab/unit/HZ
A scan-rate characteristic specifying the spatial or linewise rate at which an atomic-force-microscopy probe traverses a specimen during acquisition.
AFM Tip Nominal Radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AFMTipNominalRadius- Type
- Class, Characteristic
- altLabel
- AFM tip radius; tip radius
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/NanoM
A nominal geometric characteristic specifying the reported radius of curvature of an atomic-force-microscopy probe tip.
Mappings
- skos:broadMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/rad_xxx_xxx-39e050dffbd342e199b7330a964f3dc6-vp (Radius)
Ag Ag Cl Potential Vs RHE
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AgAgClPotentialVsRHE- Type
- Class, Characteristic
- altLabel
- Ag/AgCl potential against RHE; E_Ag/AgCl; E_Ag/AgCl = 1.015-1.026 V_RHE
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
A property denoting potential of Ag/AgCl reference electrode expressed on the RHE scale (offset/conversion factor) measured for each electrolyte batch.
Ag NW Surface Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AgNWSurfaceDensity- Type
- Class, Characteristic
- altLabel
- mg/m²; percolation threshold surface density; surface density
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerArea
Mass of deposited silver nanowires divided by the coated substrate area.
Ag NW Weight Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AgNWWeightFraction- Type
- Class, Compatibility
- altLabel
- w/w
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic that represents ag nw weight fraction for a material, component, process, measurement, or hydrogen-electrochemical system.
Ag/AgCl
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AgAgCl- Type
- Class, Instrument
- altLabel
- Ag/AgCl reference electrode; Ag/AgCl reference electrode (Metrohm); saturated Ag/AgCl
An instrument corresponding to a silver/silver chloride reference electrode and used as a reference electrode in electrochemical measurements.
Agent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Agent- Type
- Class, Agent
An entity that bears responsibility for an activity, decision, contribution, or generated resource.
Mappings
- rdfs:subClassOf
http://www.w3.org/ns/prov#Agent (Agent)
Agglomerate Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AgglomerateDiameter- Type
- Class, Characteristic
- altLabel
- agglomerate size; agglomerate size (nm); mean diameter of sediment particles
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of agglomerate.
Mappings
- skos:broadMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/dia_xxx_xxx-bb6404c75508494a93ef3ae2ad7f72ff-vp (Diameter)
Agglomerate Shape
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AgglomerateShape- Type
- Class, Characteristic
- altLabel
- branched agglomerates; spherical agglomerates
A morphological characteristic describing agglomerate shape under the conditions and reference basis stated with the record.
Agglomerate Size Distribution Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AgglomerateSizeDistributionDataset- Type
- Class, Data
- altLabel
- agglomerate size distribution; particle size distribution; size distribution
A dataset containing agglomerate size distribution data generated by Dynamic Light Scattering Measurement, Laser Diffraction Scattering Particle Size Measurement, and Ultra Small Angle X Ray Scattering Measurement.
Mappings
- skos:broadMatch
http://purl.obolibrary.org/obo/T4FS_0000347 (dataset) - skos:broadMatch
http://purl.org/spar/fabio/Dataset (dataset) - skos:broadMatch
http://semanticscience.org/resource/SIO_000089 (dataset)
Agglomerate Surface Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AgglomerateSurfaceArea- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
A property denoting surface area of ink agglomerates (mentioned as an ink-stage descriptor; no numeric values in this source).
Mappings
- skos:broadMatch
http://emmo.info/emmo#EMMO_96f39f77_44dc_491b_8fa7_30d887fe0890 (Area) - skos:broadMatch
http://semanticscience.org/resource/SIO_000045 (area) - skos:broadMatch
https://saref.etsi.org/saref4inma/Area (Area)
Aggregate Aspect Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AggregateAspectRatio- Type
- Class, Characteristic
- altLabel
- a_R
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AspectRatio
Ratio of an aggregate’s major characteristic dimension to its minor characteristic dimension, evaluated using the same specified shape-fitting or image-analysis convention.
Mappings
- skos:broadMatch
http://semanticscience.org/resource/SIO_001018 (ratio)
Air
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Air- Type
- Class, Matter
- altLabel
- H2/air; reconstituted air; unpressurized air
Air used as cathode oxidant in polarization curves.
Air Breathing Cathode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AirBreathingCathode- Type
- Class, Matter
- altLabel
- air-breathing cathode pellet; cathode pellet
A cathode configured to obtain oxygen directly from the surrounding air through a gas-accessible reaction structure.
Air Breathing Cathode Fabrication
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AirBreathingCathodeFabrication- Type
- Class, Manufacturing
- altLabel
- air-breathing cathode; cathode fabrication
Fabrication of air-breathing cathode pellets from AC/CB/PTFE mixture plus catalyst, pressed onto stainless-steel mesh current collector.
Mappings
- skos:broadMatch
http://www.w3id.org/ecsel-dr-SO#Fab (Fabrication)
Air Diffusion Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AirDiffusionLayer- Type
- Class, Matter
- altLabel
- gas diffusion simulation layer; layer Z
Pt-free sublayer (layer Z) adjacent to GDL, mainly for gas diffusion simulation in MCL
Air Diffusion Layer Thickness Fraction In MCL
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AirDiffusionLayerThicknessFractionInMCL- Type
- Class, Characteristic
- altLabel
- proportion in MCL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
Through-plane thickness of the air-diffusion sublayer divided by the total through-plane thickness of the multilayer cathode containing it.
Al Content Wt
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AlContentWt- Type
- Class, Characteristic
- altLabel
- Al content; wt.% Al
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting aluminum weight percent in LDH (from ICP-AES).
Alcohol Mass Fraction In Solvent Mixture
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AlcoholMassFractionInSolventMixture- Type
- Class, Characteristic
- altLabel
- alcohol fraction; alcohol fraction in solvent; alcohol-rich solvent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Alcohol Mass Fraction In Solvent Mixture.
Alcohol Mole Fraction In Solvent Mixture
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AlcoholMoleFractionInSolventMixture- Type
- Class, Characteristic
- altLabel
- [alcohol]/[alcohol+water] (mol ratio)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MoleFraction
A composition characteristic expressing the stated fractional composition identified as Alcohol Mole Fraction In Solvent Mixture.
Alkali Lignin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AlkaliLignin- Type
- Class, Matter
- altLabel
- Kraft lignin; lignin (alkali
A lignin material recovered from lignocellulosic biomass by alkaline processing.
Alkylpolyglycoside Surfactant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AlkylpolyglycosideSurfactant- Type
- Class, Matter
Non-ionic sugar-based surfactant used to improve wetting and encapsulate ferritin in micelles.
Alumina
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Alumina- Type
- Class, Matter
- altLabel
- alpha-alumina; aluminium oxide buffer layer; aluminum oxide
Aluminum oxide ceramic phase formed after sintering (gamma/delta/theta/alpha transitions).
Alumina Milling Media
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AluminaMillingMedia- Type
- Class, Matter
- altLabel
- Al2O3 media; alumina media
Alumina milling media used in dry mill-mixing.
Aluminum Foil
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AluminumFoil- Type
- Class, Matter
Substrate used to capture extruded microfilaments.
Aluminum Foil Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AluminumFoilSubstrate- Type
- Class, Matter
- altLabel
- aluminum foil; substrate/backing
A material entity corresponding to an aluminum foil substrate and used as an input in Hot Pressing.
Aluminum Layer Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AluminumLayerThickness- Type
- Class, Characteristic
- altLabel
- Al layer thickness
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the distance between the opposing bounding surfaces of aluminum layer.
Aluminum Nitrate Additive
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AluminumNitrateAdditive- Type
- Class, Matter
- altLabel
- aluminium nitrate
Aluminum nitrate additive added to ferritin solution to improve dispersion / prevent agglomeration.
Mappings
- skos:broadMatch
https://w3id.org/nfdi4cat/voc4cat_0007793 (additive)
Aluminum Nitrate Molar Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AluminumNitrateMolarConcentration- Type
- Class, Characteristic
- altLabel
- Al(NO3)3 concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentration
A composition characteristic specifying the amount of aluminum nitrate molar per stated quantity of mixture or solution.
Aluminum Nitrate Solution Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AluminumNitrateSolutionVolumeFraction- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
Volume of the aluminum-nitrate stock solution added during preparation divided by the sum of all liquid-component volumes before mixing.
Aluminum Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AluminumSubstrate- Type
- Class, Matter
- altLabel
- Al substrate
Metallic aluminum substrate used for CNT forest growth (99.99% Al).
Aluminum Thin Film Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AluminumThinFilmLayer- Type
- Class, Matter
- altLabel
- Al layer; aluminium metal layer
Thin aluminum metal film deposited on Si wafer prior to oxidation to alumina.
Ambient Pressure Chemical Vapor Deposition Synthesis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AmbientPressureChemicalVaporDepositionSynthesis- Type
- Class, Manufacturing
- altLabel
- AP-CVD; ambient pressure CVD; ambient pressure-chemical vapor deposition
A deposition or synthesis process in which gaseous precursors react or decompose at a substrate at approximately ambient pressure to form a solid deposit.
Amine Hydrolysis Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AmineHydrolysisProcess- Type
- Class, Manufacturing
- altLabel
- amine hydrolysis
Amine hydrolysis step (with triethylamine) used to form MS@NiFeO nanohybrids.
Aminoantipyrine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Aminoantipyrine- Type
- Class, Matter
Nitrogen-rich organic precursor (AAPyr) used to synthesize M–N–C catalysts.
Aminopropyltriethoxysilane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Aminopropyltriethoxysilane- Type
- Class, Matter
A material entity corresponding to an aminopropyltriethoxysilane and used as an input in Silica Coating Process.
Ammonia
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Ammonia- Type
- Class, Matter
A material entity corresponding to an ammonia and used as an input in Silica Coating Process.
Mappings
- skos:narrowMatch
http://purl.allotrope.org/ontologies/material#AFM_0001117 (ammonia gas)
Ammonium Acetate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AmmoniumAcetate- Type
- Class, Matter
- altLabel
- AA
Additive in ligand exchange chemistry (AA-assisted).
Ammonium Carbonate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AmmoniumCarbonate- Type
- Class, Matter
A material entity corresponding to an ammonium carbonate and used as an input in Catalyst Ink Preparation.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_229630 (ammonium carbonate)
Ammonium Carbonate Solution Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AmmoniumCarbonateSolutionConcentration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentration
Amount of ammonium carbonate solute divided by the volume of the prepared ammonium-carbonate solution.
Ammonium Dihydrogen Phosphate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AmmoniumDihydrogenPhosphate- Type
- Class, Matter
Phosphorus precursor used in wet co-impregnation.
Ammonium Hydrogen Difluoride
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AmmoniumHydrogenDifluoride- Type
- Class, Matter
Chemical used (4 M) to remove the halloysite template after carbonization.
Amorphous Carbon Deposit
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AmorphousCarbonDeposit- Type
- Class, Matter
- altLabel
- amorphous carbon; unstructured carbon deposit
A material entity corresponding to an amorphous carbon deposit and produced in Ambient Pressure Chemical Vapor Deposition Synthesis.
Analysis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Analysis- Type
- Class, Process
A process that interprets, transforms, or evaluates data to obtain information, classifications, or scientific results.
- subclasses
- Apparatus Specification Measurement, Capillary Pressure Estimation, Crack Connectivity Analysis, Data processing, Deflection Criterion Calculation, Degradation Prediction Evaluation Measurement, Density Functional Theory Calculation, Distribution Of Relaxation Times Analysis, Image Analysis Pore Measurement, Ink Formulation Specification Measurement, Ink Printability Assessment, Ink Stability Model Calculation, Ionomer Dispersion Property Compilation, Literature Microstructure Compilation, Literature Review Synthesis, Material Specification Measurement, Pt Utilization Calculation, Review Statement Extraction, Solvent Physical Property Compilation, Solvent Property Lookup, Tortuosity Calculation, Transmission Line Model Analysis, Water Storage Space Calculation
Analytical Balance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnalyticalBalance- Type
- Class, Instrument
- altLabel
- A&D BM-20 microelectronic balance; BM-20 microelectronic balance; electronic balance
Balance used to weigh substrates pre/post coating (air ionizer used to reduce static).
Mappings
- skos:broadMatch
http://purl.obolibrary.org/obo/OBI_0001135 (balance)
Analytical Centrifuge
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnalyticalCentrifuge- Type
- Class, Instrument
- altLabel
- AC; dispersion stability analyzer
An instrument that records time- and position-dependent signals during centrifugation to characterize sedimentation, separation, particle distributions, or dispersion stability.
Analytical Centrifuge Sedimentation Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnalyticalCentrifugeSedimentationMeasurement- Type
- Class, Measurement
- altLabel
- analytical centrifuge
A particle-characterization measurement that monitors redistribution or sedimentation of dispersed particles under controlled centrifugal acceleration to characterize sedimentation behavior, dispersion stability, or particle-size descriptors.
Angular Frequency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AngularFrequency- Type
- Class, Characteristic
- altLabel
- angular frequency (rad)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AngularFrequency
A frequency characteristic specifying the repetition rate or oscillation frequency associated with angular.
Anion Exchange Ionomer Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnionExchangeIonomerPowder- Type
- Class, Matter
- altLabel
- AEI powder; anion-exchange ionomer (AEI) powder
Anion-exchange ionomer powder used in AEMFC electrodes (mixed with catalyst at 4:1 catalyst:AEI weight ratio).
Anion Exchange Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnionExchangeMembrane- Type
- Class, Matter
- altLabel
- AEM; anion exchange membrane (AEM); anion-exchange composite polymer membrane
An ion-exchange membrane containing fixed positively charged sites and mobile anion counterions that preferentially transports anions while separating adjoining compartments.
Anion To Cation Molar Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnionToCationMolarRatio- Type
- Class, Characteristic
- altLabel
- A/C; A/C ratio; molar ratio (A/C)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A dimensionless characteristic expressing the stated ratio identified as Anion To Cation Molar Ratio.
Mappings
- skos:broadMatch
http://semanticscience.org/resource/SIO_001018 (ratio)
Annealing Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnnealingDuration- Type
- Class, Characteristic
- altLabel
- annealing time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the duration of annealing.
Annealing Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnnealingTemperature- Type
- Class, Characteristic
- altLabel
- F2; growth temperature; °C
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with annealing.
Annealing Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnnealingTime- Type
- Class, Characteristic
- altLabel
- annealing duration; heat treatment time; oxidation time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with annealing.
Anode Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodeCatalystLayer- Type
- Class, Matter
- altLabel
- anode catalytic layer; anode layer; catalyst layer
A catalyst-containing electrode layer that supports the anodic oxidation reaction and the associated electronic, ionic, and reactant transport pathways.
Anode Catalyst Layer Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodeCatalystLayerThickness- Type
- Class, Characteristic
A property denoting the thickness of an anode catalyst layer.
Anode Catalyst Loading
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodeCatalystLoading- Type
- Class, Characteristic
- altLabel
- Pt loading (anode); anode Pd/C loading; anode Pt loading
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ArealMassLoading
Mass of the specified catalyst material in the anode divided by the geometric electrode area over which that material is deposited.
Anode Gas Composition
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodeGasComposition- Type
- Class, Characteristic
- altLabel
- anode gas species
A composition characteristic specifying anode gas composition under the conditions and reference basis stated with the record.
Anode Gas Volumetric Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodeGasVolumetricFlowRate- Type
- Class, Characteristic
- altLabel
- anode gas flow rate
A transport characteristic specifying the quantity of anode gas volumetric passing a reference boundary per unit time.
Anode GDE
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodeGDE- Type
- Class, Matter
- altLabel
- Pt GDE; anode Pt GDE; commercial gas diffusion electrode (GDE) used as anode
A gas-diffusion electrode configured for the anodic reaction, with a porous structure that enables gas transport to or from the reaction layer and provides electronic conduction.
Anode MPL Carbon Support Loading
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodeMPLCarbonSupportLoading- Type
- Class, Characteristic
- altLabel
- carbon loading in the anode MPL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ArealMassLoading
Mass of carbon material in the anode microporous layer divided by the geometric area coated by that microporous layer.
Anode Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodePotential- Type
- Class, Characteristic
- altLabel
- MFC-CICo; MFC-CIFe; MFC-Pt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
A property denoting anode electrode potential measured vs Ag/AgCl during operation/polarization.
Anode Reaction Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodeReactionResistance- Type
- Class, Characteristic
- altLabel
- ARR
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance
A property denoting combined anode reaction resistance ARR = Rct*R0/(Rct+R0) reported for methanol oxidation at 0.5 V.
Anode Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodeResistance- Type
- Class, Characteristic
- altLabel
- RA
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricResistance | http://qudt.org/vocab/unit/OHM
A property denoting description=Anode resistance extracted from anode ohmic drop during pulse (Ohm).
Anode Stoichiometric Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnodeStoichiometricRatio- Type
- Class, Characteristic
- altLabel
- anode stoichiometry; λ_an; λ_anode
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
Ratio of the molar hydrogen supply rate to the anode to the stoichiometric hydrogen-consumption rate corresponding to the operating current; for a single hydrogen fuel cell the latter is I/(2F).
Ansys Fluent Fuel Cell Module
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AnsysFluentFuelCellModule- Type
- Class, SoftwareArtifact
- altLabel
- Ansys Fluent 15.0
An Ansys Fluent software module for numerical modeling of fuel cells through coupled fluid flow, species and charge transport, and electrochemical reaction calculations.
Anthraquinone 2 Sulfonic Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Anthraquinone2SulfonicAcid- Type
- Class, Matter
Negative (anolyte) quinone electroactive material used in ORFB (AQS/AQSH2 couple).
Apparatus Specification Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ApparatusSpecificationMeasurement- Type
- Class, Process
An information-extraction or compilation analysis that records reported apparatus specifications together with their source and the identity of the equipment to which they apply.
Apparent Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ApparentDensity- Type
- Class, Compatibility
- altLabel
- ρ_a
A property denoting apparent density measured by helium pycnometry on fragments.
Aqueous Organic Flow Battery
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AqueousOrganicFlowBattery- Type
- Class, Matter
- altLabel
- quinone redox flow battery
A redox flow-battery system in which aqueous electrolytes circulate between storage reservoirs and electrochemical cells and at least one electrolyte contains an organic redox-active species.
Archimedes Density Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ArchimedesDensityMeasurement- Type
- Class, Measurement
Bulk density measurement of printed, pyrolyzed parts by Archimedes method.
Arduino Mega 2560
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ArduinoMega2560- Type
- Class, Matter
A programmable microcontroller development board based on the ATmega2560, providing digital and analog interfaces for controlling and monitoring connected equipment.
Area Normalized Anode Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AreaNormalizedAnodeResistance- Type
- Class, Characteristic
- altLabel
- MFC-CICo; MFC-CIFe; area based resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance
A property denoting anode resistance normalized by electrode area from EPS analysis (Ω·m^2).
Area Normalized Cathode Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AreaNormalizedCathodeResistance- Type
- Class, Characteristic
- altLabel
- MFC-CICo; MFC-CIFe; area based resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance
A property denoting cathode resistance normalized by electrode area from EPS analysis (Ω·m^2).
Area Normalized Overall Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AreaNormalizedOverallResistance- Type
- Class, Characteristic
- altLabel
- MFC-CICo; overall area resistance; whole-cell area resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance
A property denoting overall cell resistance normalized by electrode area from EPS analysis (Ω·m^2).
Areal Water Storage Space
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ArealWaterStorageSpace- Type
- Class, Compatibility
- altLabel
- water storage capacity; water storage space
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerArea
A property denoting areal water storage space and determined in Water Storage Space Calculation.
Argon
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Argon- Type
- Class, Matter
Inert carrier gas used in Ar-5% H2 reducing atmosphere.
Mappings
- skos:narrowMatch
http://purl.allotrope.org/ontologies/material#AFM_0001130 (argon gas)
Argon 5 Percent Hydrogen
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Argon5PercentHydrogen- Type
- Class, Matter
A gaseous mixture containing argon and hydrogen, with hydrogen reported as 5 percent and the percentage basis retained from the source record when available.
Argon Gas
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ArgonGas- Type
- Class, Matter
- altLabel
- carrier gas
Inert atmosphere used during pyrolysis heat treatment.
Assembly process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AssemblyProcess- Type
- Class, Manufacturing
A manufacturing process that joins or arranges materials and components into a larger functional object.
Assembly Torque
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AssemblyTorque- Type
- Class, Characteristic
- altLabel
- clamping torque; torque 40 lb-in
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Torque | http://qudt.org/vocab/unit/N-M
A mechanical characteristic specifying the torque applied to or produced by assembly.
AST Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ASTDataset- Type
- Class, Data
- altLabel
- accelerated stress test dataset
A dataset containing operational data generated during an accelerated stress test protocol.
Mappings
- skos:broadMatch
http://purl.obolibrary.org/obo/T4FS_0000347 (dataset) - skos:broadMatch
http://purl.org/spar/fabio/Dataset (dataset) - skos:broadMatch
http://semanticscience.org/resource/SIO_000089 (dataset)
Astrocyte Cell Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AstrocyteCellArea- Type
- Class, Characteristic
- altLabel
- mean astrocyte area; µm²
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
A property denoting average cell area for astrocytes on substrates, quantified from microscopy images.
Astrocyte Percentage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AstrocytePercentage- Type
- Class, Characteristic
- altLabel
- % astrocytes; percentage of astrocytes
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percentage | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction of astrocytes in mixed neural culture attached to each substrate, quantified via immunostaining.
Atomic force microscopy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AtomicForceMicroscopyMeasurement- Type
- Class, Measurement
- altLabel
- AFM; AFM imaging; Atomic Force Microscopy Measurement; atomic force microscopy
A measurement process that uses atomic force microscopy for in-situ or ex-situ surface-topography and microstructure characterization, including catalyst-layer and membrane-electrode-assembly imaging as well as adsorbed-ionomer structure analysis.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0000113 (atomic force microscopy) - skos:exactMatch
https://w3id.org/emmo/domain/characterisation-methodology/chameo#AtomicForceMicroscopy (AtomicForceMicroscopy) - skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000070 (atomic force microscopy) - skos:exactMatch
https://w3id.org/polymat/ImagingAFM (Imaging AFM)
Atomic Layer Deposition
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AtomicLayerDeposition- Type
- Class, Manufacturing
- altLabel
- ALD
A coating or deposition process that forms a material layer through sequential, self-limiting surface reactions of gaseous precursors.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001311 (atomic layer deposition)
ATRFTIR Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ATRFTIRMeasurement- Type
- Class, Measurement
- altLabel
- ATR–FTIR; FTIR
ATR–FTIR measurement to assess ester cross-link stability over acid exposure time.
Automatic Plunge Freezer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AutomaticPlungeFreezer- Type
- Class, Instrument
Instrument for automated plunge freezing of TEM grids into cryogen (liquid ethane).
Average Chopped Fiber Length
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AverageChoppedFiberLength- Type
- Class, Characteristic
- altLabel
- Average SiC fiber length (mm); average SiC fiber length
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting mean chopped SiC fiber length after mixing (mm).
Average Pore Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AveragePoreDiameter- Type
- Class, Characteristic
- altLabel
- average pore size; mean pore diameter; pore diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting average pore diameter and determined in X Ray Computed Tomography Imaging, Nitrogen Physisorption Measurement, and Mercury Intrusion Porosimetry Measurement.
Mappings
- skos:broadMatch
http://purl.allotrope.org/ontologies/result#AFR_0003270 (pore diameter)
Average Pore Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AveragePoreSize- Type
- Class, Characteristic
- altLabel
- BJH pore size; mean pore size; pore size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting average pore size of carbon xerogel support (reported characteristic value).
Mappings
- skos:broadMatch
http://purl.allotrope.org/ontologies/quality#AFQ_0000244 (pore size) - skos:broadMatch
http://purl.obolibrary.org/obo/MS_1003924 (pore size)
Average Water Droplet Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AverageWaterDropletArea- Type
- Class, Characteristic
- altLabel
- AverageArea; average droplet area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area | http://qudt.org/vocab/unit/CentiM2
A property denoting the average projected area of water droplets derived from tomography-based droplet analysis in fuel-cell water-dynamics studies.
Average Water Droplet Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#AverageWaterDropletCount- Type
- Class, Characteristic
- altLabel
- AverageNumber; average droplet count
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A property denoting the average number of detected water droplets derived from tomography-based droplet analysis in fuel-cell water-dynamics studies.
Backbone Attachment Molar Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BackboneAttachmentMolarPercent- Type
- Class, Characteristic
- altLabel
- RFB; backbone attachment ratio; molar % of backbone fluorine atoms attached to graphite
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarPercent
Percentage of the polymer-backbone fluorine atoms classified as attached to the graphite surface, calculated as the number of such attached atoms divided by the total number of backbone fluorine atoms and multiplied by 100.
Bake Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BakeTemperature- Type
- Class, Characteristic
- altLabel
- curing temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with bake.
Bake Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BakeTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with bake.
Ball Mill
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BallMill- Type
- Class, Instrument
- altLabel
- jar mill; roller mill
A milling instrument in which moving balls apply impact and shear to grind, mix, or disperse material in a container.
Ball Milling
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BallMilling- Type
- Class, Manufacturing
- altLabel
- Fritsch planetary mill; planetary milling; roller mill
A mechanical material-processing operation in which moving milling media impart impact and shear to comminute solids or disperse particulate constituents in a suspension.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001654 (ball milling)
Ball Milling Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BallMillingTime- Type
- Class, Characteristic
- altLabel
- ball milling for 10 minutes; milling time; mixing time (ball milling)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with ball milling.
Ball To Powder Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BallToPowderRatio- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A dimensionless characteristic expressing the stated ratio identified as Ball To Powder Ratio.
Band Gap Energy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BandGapEnergy- Type
- Class, Characteristic
- altLabel
- Eg; band gap; energy bandgap
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Energy
A property denoting optical band gap energy estimated from UV–Vis diffuse reflectance and Tauc plot.
Bandgap Energy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BandgapEnergy- Type
- Class, Compatibility
- altLabel
- Eg; band gap; narrow bandgap
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Energy
A that represents bandgap energy for a material, component, process, measurement, or hydrogen-electrochemical system.
Bath Solute Mass Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BathSoluteMassConcentration- Type
- Class, Characteristic
- altLabel
- g/L
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassConcentration
A composition characteristic specifying the amount of bath solute mass per stated quantity of mixture or solution.
Bath Solute Volume Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BathSoluteVolumeConcentration- Type
- Class, Characteristic
- altLabel
- mL/L
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
Volume of a specified liquid additive introduced into a plating bath divided by the volume of the prepared bath.
Battery Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BatteryAnalyzer- Type
- Class, Instrument
- altLabel
- battery analyzer (TOB
An instrument corresponding to a battery analyzer and used in Organic Flow Battery Polarization Measurement and Galvanostatic Charge Discharge Measurement.
Battery system
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BatterySystem- Type
- Class, Matter
An electrochemical system that stores chemical energy internally and delivers or accepts electrical energy through electrochemical reactions.
Bead Mill Machine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BeadMillMachine- Type
- Class, Instrument
Bead-mill instrument used to grind and disperse ink components during catalyst ink preparation.
Bending Cycle Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BendingCycleCount- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying the number of bending cycle.
Bending Frequency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BendingFrequency- Type
- Class, Characteristic
- altLabel
- cycles/min
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A frequency characteristic specifying the repetition rate or oscillation frequency associated with bending.
Bending Radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BendingRadius- Type
- Class, Characteristic
- altLabel
- radius of curvature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the radius of bending.
BET Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BETAnalyzer- Type
- Class, Instrument
- altLabel
- BET analyzer (Micromeritics ASAP 2010)
Instrument for BET nitrogen adsorption (specific surface area, pore volume).
BET Surface Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BETSurfaceAnalyzer- Type
- Class, Instrument
- altLabel
- Gemini VII surface analyzer
An instrument corresponding to a BET surface analyzer and used in Nitrogen Physisorption Measurement.
BET Surface Area Nitrogen
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BETSurfaceAreaNitrogen- Type
- Class, Characteristic
- altLabel
- BET area; BET surface area (N2); S_BET(N2)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerMass
A property denoting bET surface area measured by N2 adsorption at 77 K.
BET Surface Area Octane Adsorption
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BETSurfaceAreaOctaneAdsorption- Type
- Class, Characteristic
- altLabel
- BET; BET surface area; specific surface area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerMass
A property denoting bET specific surface area of dry Pt/C powders measured using octane adsorption in dynamic vapour sorption (DVS). | Proposed because ontology has BETSurfaceAreaNitrogen/WaterVapor but not octane/DVS.
BET Surface Area Water Vapor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BETSurfaceAreaWaterVapor- Type
- Class, Characteristic
- altLabel
- BET surface area (H2O); S_BET(H2O)
A property denoting bET-like surface area from water vapor adsorption; used for hydrophilicity metric.
Beta Ag 2 Se
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BetaAg2Se- Type
- Class, Matter
- altLabel
- β-Ag2Se
A material entity corresponding to a beta ag 2 se and used as an input in Catalyst Ink Preparation and Ultrasonic Liquid Exfoliation.
Beta Si C Phase
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BetaSiCPhase- Type
- Class, Matter
- altLabel
- beta-SiC; β-SiC
Crystalline silicon carbide phase observed in XRD at high sintering temperatures (≥1200°C).
Bias Current
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BiasCurrent- Type
- Class, Characteristic
- altLabel
- current (A); working current
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrent | http://qudt.org/vocab/unit/MilliA
An electrical characteristic specifying the electric current associated with bias.
Bias Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BiasPotential- Type
- Class, Characteristic
- altLabel
- applied potential; cell potential; holding potential
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
An electrical characteristic specifying the electric or electrochemical potential associated with bias.
Binder Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BinderMassFraction- Type
- Class, Characteristic
- altLabel
- HPMC
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
http://qudt.org/vocab/quantitykind/MassFraction
Mass of polymer binder divided by the total dry mass of all solids in the catalyst-layer formulation, including the binder.
Binder Mass Loss Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BinderMassLossFraction- Type
- Class, Compatibility
- altLabel
- binder loss
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFractionPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting binder mass loss fraction and determined in Thermogravimetric Analysis Measurement.
Binder Type
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BinderType- Type
- Class, Characteristic
- altLabel
- I2 binder; PTFE binder; polymer binder
- QUDT guidance
- http://qudt.org/vocab/unit/UNITLESS
A categorical characteristic identifying binder type under the conditions and reference basis stated with the record.
Binding Energy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BindingEnergy- Type
- Class, Characteristic
- altLabel
- XPS binding energy; XPS peak binding energy
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Energy
A property denoting XPS peak binding energy position used to characterize elemental and chemical-state signatures in PEMFC-relevant surface-chemistry measurements.
Biodiesel
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Biodiesel- Type
- Class, Matter
Biodiesel product phase enriched in fatty acid methyl esters.
Biomass Derived Few Layer Graphene Flakes
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BiomassDerivedFewLayerGrapheneFlakes- Type
- Class, Matter
- altLabel
- biomass-derived graphene flakes; micron-scale graphene flakes; sawdust-derived graphene
Few-layer graphene flakes produced from biomass via solvent-free shearing + catalytic carbothermal graphitization (main sample).
Biomass Precursor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BiomassPrecursor- Type
- Class, Matter
Generic biomass feedstock used as carbon precursor (e.g., sawdust, coconut husk, peanut shell, corncob, tea leaves, gingko leaves, wheat straw).
Biomimetic Vein Structure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BiomimeticVeinStructure- Type
- Class, Characteristic
- altLabel
- leaf vein structure
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Text
A property denoting hierarchical pore architecture inspired by leaf veins.
Blue Dye
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BlueDye- Type
- Class, Compatibility
- altLabel
- blue dye (Estudio Rit.)
Colorant added to DIW photocurable ink.
Boiling Point
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BoilingPoint- Type
- Class, Characteristic
- altLabel
- Tb; boiling temperature; bp
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermodynamicTemperature | http://qudt.org/vocab/unit/DEG_C
A property denoting boiling point of solvent; proxy for volatility and drying behavior.
Boiling Pretreatment
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BoilingPretreatment- Type
- Class, Manufacturing
- altLabel
- H2O2 boiling; boil pretreatment; water boiling
Boiling membrane/CCM in water (or peroxide solutions) as pre-hydration/cleaning step.
Break In Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BreakInDataset- Type
- Class, Data
- altLabel
- conditioning dataset
A dataset containing operational data generated during a fuel-cell break-in or conditioning procedure.
Break In Procedure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BreakInProcedure- Type
- Class, Process
- altLabel
- activation procedure; break-in; conditioning procedure
Operational conditioning process used to activate and stabilize a membrane electrode assembly before formal electrochemical characterization.
Break Time Between Spray Cycles
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BreakTimeBetweenSprayCycles- Type
- Class, Characteristic
- altLabel
- break time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying break time between spray cycles under the conditions and reference basis stated with the record.
Brush Coating
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BrushCoating- Type
- Class, Manufacturing
- altLabel
- brushed into the MPL; brushed onto membrane; brushing
Manual/low-shear coating method for depositing catalyst inks.
Bulk Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BulkDensity- Type
- Class, Characteristic
- altLabel
- Archimedes density; ink density; ρ_b
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassDensity
A property denoting bulk density computed from mass/volume of printed lattice body.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/process#AFP_0003781 (bulk density)
Bulk Sedimentation Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#BulkSedimentationTime- Type
- Class, Characteristic
- altLabel
- BsT
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
Elapsed time from the start of an analytical-centrifugation test to a declared bulk-sedimentation or phase-separation endpoint identified from the recorded transmission profiles.
Butylamine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Butylamine- Type
- Class, Matter
Butylamine solvent commonly used for CQD inks in the review.
C 1 s Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#C1sAtomicPercent- Type
- Class, Characteristic
- altLabel
- C atomic percent; carbon atomic percent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AtomPercent
A property denoting atomic percent of carbon (from C 1s signal) measured by XPS.
C 1 s Peak Fraction C O
- IRI
https://w3id.org/h2kg/hydrogen-ontology#C1sPeakFraction_C_O- Type
- Class, Characteristic
- altLabel
- C-O peak fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction (%) of C1s peak assigned to C–O at 286.50 eV from XPS deconvolution.
C 1 s Peak Fraction CC CH
- IRI
https://w3id.org/h2kg/hydrogen-ontology#C1sPeakFraction_CC_CH- Type
- Class, Characteristic
- altLabel
- C=C; C−H peak fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction (%) of C1s peak assigned to C=C/C–C/C–H at 284.50 eV from XPS deconvolution.
C 1 s Peak Fraction Ceq O
- IRI
https://w3id.org/h2kg/hydrogen-ontology#C1sPeakFraction_CeqO- Type
- Class, Characteristic
- altLabel
- C=O peak fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction (%) of C1s peak assigned to C=O at 288.00 eV from XPS deconvolution.
C 1 s Peak Fraction O Ceq O
- IRI
https://w3id.org/h2kg/hydrogen-ontology#C1sPeakFraction_O_CeqO- Type
- Class, Characteristic
- altLabel
- O=C−O peak fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction (%) of C1s peak assigned to O=C–O at 289.00 eV from XPS deconvolution.
Cantilever Resonance Frequency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CantileverResonanceFrequency- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A frequency characteristic specifying the repetition rate or oscillation frequency associated with cantilever resonance.
Cantilever Spring Constant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CantileverSpringConstant- Type
- Class, Characteristic
- altLabel
- spring constant 2.8 N/m; typical spring constant 2.8 N/m
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SpringConstant
A quantitative characteristic specifying cantilever spring constant under the conditions and reference basis stated with the record.
Capacitance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Capacitance- Type
- Class, Characteristic
- altLabel
- C; capacitance (total); capacitance (µF)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Capacitance
A property denoting total measured capacitance (non-normalized) of the electrode/electrolyte interface from EIS fit.
Capillary Furnace
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CapillaryFurnace- Type
- Class, Instrument
Capillary furnace used for heating vacuum-encapsulated specimens.
Capillary Pressure Estimation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CapillaryPressureEstimation- Type
- Class, Process
- altLabel
- capillary pressure derivation
An analysis that infers liquid-gas capillary pressure from saturation or wetting observations using a stated pressure-saturation relation or capillary model.
Capillary Pressure In Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CapillaryPressureInMembrane- Type
- Class, Characteristic
- altLabel
- acid pressure in membrane; capillary pressure
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A pressure characteristic specifying capillary pressure in membrane under the conditions and reference basis stated with the record.
Capillary-pressure axis data
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CapillaryPressureAxisData- Type
- Class, Data
- altLabel
- capillary pressure range for WRC
- notation
- pC
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure | http://qudt.org/vocab/unit/PA | Value-free QUDT guidance for Capillary-pressure axis data; the curated source reports [Pa].
Array of capillary-pressure values used as the pressure axis for evaluating a cathode-catalyst-layer water-retention curve.
Carbon Agglomerate Core Radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonAgglomerateCoreRadius- Type
- Class, Characteristic
- altLabel
- core radius; core radius of carbon agglomerates
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting carbon agglomerate core radius and determined in Contrast Variation SANSUSANS Measurement.
Carbon Aggregate Effective Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonAggregateEffectiveDensity- Type
- Class, Compatibility
- altLabel
- effective density; ρ_e
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Density
A property denoting carbon aggregate effective density.
Carbon Aggregate Ionomer Particle Radius Of Gyration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonAggregateIonomerParticleRadiusOfGyration- Type
- Class, Characteristic
- altLabel
- Rg of carbon aggregate–ionomer particles; carbon aggregate–Nafion particle size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting radius of gyration (Rg) of carbon aggregate–ionomer core–shell particles in catalyst ink (without contrast-match).
Carbon Aggregate Radius Of Gyration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonAggregateRadiusOfGyration- Type
- Class, Characteristic
- altLabel
- Rg of carbon aggregates; Rg of carbon aggregates in catalyst ink; radius of gyration of carbon aggregates
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting radius of gyration (Rg) of carbon support aggregates in catalyst ink (Nafion contrast-matched), from Guinier–Porod fits.
Carbon Black
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonBlack- Type
- Class, Matter
- altLabel
- CB; carbon black support; nonporous carbon
Carbon black additive used with activated carbon and PTFE to fabricate air-breathing cathode pellets.
Carbon Black Aggregate Anisotropy Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonBlackAggregateAnisotropyRatio- Type
- Class, Characteristic
- altLabel
- anisotropy ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting anisotropy ratio of CB aggregates (ratio of long to short axis length in circumscribing prolate spheroid), used for validation (range ~1–4).
Carbon Black Aggregate Structure Simulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonBlackAggregateStructureSimulation- Type
- Class, Process
- altLabel
- CB aggregate structure simulation
A computational model execution that constructs or predicts three-dimensional carbon-black aggregate morphology using specified particle-placement, aggregation, or surface-structure rules.
Carbon Black Particle Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonBlackParticleSize- Type
- Class, Characteristic
- altLabel
- carbon black size; carbon particle diameter; carbon support particle size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting primary carbon black particle size supporting Pt nanoparticles (nm scale).
Carbon Black Primary Particles Per Aggregate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonBlackPrimaryParticlesPerAggregate- Type
- Class, Characteristic
- altLabel
- Number of particle per aggregate; number of particles per aggregate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A quantitative characteristic specifying carbon black primary particles per aggregate under the conditions and reference basis stated with the record.
Carbon Black Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonBlackVolumeFraction- Type
- Class, Characteristic
- altLabel
- V_CB; carbon volume ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
Volume occupied by the carbon-black solid phase divided by the total representative catalyst-layer volume used in the stated microstructure model.
Carbon Cloth Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonClothSubstrate- Type
- Class, Matter
- altLabel
- CC; carbon cloth; treated carbon cloth
3D carbon cloth substrate used as electrode support (mapped loosely to GasDiffusionLayer in ontology, but kept distinct here).
Carbon density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonDensity- Type
- Class, Characteristic
- altLabel
- density of carbon
- notation
- rhoC
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassDensity | http://qudt.org/vocab/unit/GM-PER-M3 | Value-free QUDT guidance for Carbon density; the curated source reports [g/m^3].
Mass density of the carbon-support material.
Carbon Dioxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonDioxide- Type
- Class, Matter
Reactant gas for dry reforming of methane.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_16526 (Carbon dioxide) - skos:exactMatch
https://openenergyplatform.org/ontology/oeo/OEO_00000006 (carbon dioxide) - skos:narrowMatch
http://purl.allotrope.org/ontologies/material#AFM_0001116 (carbon dioxide gas)
Carbon Dioxide Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonDioxidePercent- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percentage | http://qudt.org/vocab/unit/PERCENT
A quantitative characteristic that represents carbon dioxide percent for a material, component, process, measurement, or hydrogen-electrochemical system.
Carbon Felt Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonFeltElectrode- Type
- Class, Matter
- altLabel
- Panex35 carbon felt; carbon felt
Carbon felt substrate used as both anode and cathode electrode material in the MFC.
Carbon Fiber
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonFiber- Type
- Class, Matter
- altLabel
- thick carbon fibers
A filamentary material composed predominantly of carbon.
Carbon Fiber Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonFiberDiameter- Type
- Class, Characteristic
- altLabel
- fiber diameter; nanofiber diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting carbon fiber diameter and determined in Electron Microscopy Imaging.
Carbon Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonMass- Type
- Class, Characteristic
- altLabel
- g_carbon
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of carbon.
Carbon Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonMassFractionInInk- Type
- Class, Characteristic
- altLabel
- HH; HL; MPL ink carbon concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Carbon Mass Fraction In Ink.
Carbon material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonMaterial- Type
- Class, Matter
A material entity whose functional structure is predominantly composed of carbon in elemental, graphitic, porous, fibrous, or particulate form.
- subclasses
- Acetylene Black Carbon Black, Activated Carbon, Amorphous Carbon Deposit, Biomass Derived Few Layer Graphene Flakes, Carbon Black, Carbon Cloth Substrate, Carbon Fiber, Carbon Nanotube, Carbon Nanotube Forest, Carbon Support, Carbon Xerogel X 85, Carbonized 3 D Printed Carbon Material, Conductive Carbon Grease, Fe Doped Graphene Flakes, Graphene Nanoplatelets, Graphene Oxide, Graphite Oxide, Graphite Powder, Graphite Sheet, Graphite Sheet With Carboxylate Groups, Hollow Carbon Sphere, Ketjen Black EC 300 J Carbon Support, Mesoporous Carbon Support, Multiwalled Carbon Nanotube, Nitrogen Doped Graphene, Orange Peel Activated Carbon, Three Dimensional Graphene Nanosheets, Vulcan XC 72 R Carbon Black
Carbon Monoxide Displacement Chronoamperometry
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonMonoxideDisplacementChronoamperometry- Type
- Class, Measurement
- altLabel
- CO displacement chronoamperometry
CO displacement transient (I–t) to quantify displacement charge; used to infer sulfonate coverage / adsorbed species at set potentials.
Carbon Monoxide Stripping Voltammetry
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonMonoxideStrippingVoltammetry- Type
- Class, Measurement
- altLabel
- CO voltammetry stripping; CO-stripping voltammogram; carbon monoxide stripping
CO stripping voltammetry measurement to quantify ECSA at different RH levels.
Carbon Monoxide Volume Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonMonoxideVolumePercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction | http://qudt.org/vocab/unit/PERCENT
Carbon-monoxide gas volume divided by the total volume of the carbon-monoxide/nitrogen feed mixture, evaluated at the same temperature and pressure and multiplied by 100.
Carbon Nanotube
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonNanotube- Type
- Class, Matter
- altLabel
- carbon nanotube array
A tubular carbon nanostructure consisting of one or more approximately cylindrical graphene-like walls.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_50594 (carbon nanotube)
Carbon Nanotube Complete Decomposition Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonNanotubeCompleteDecompositionTemperature- Type
- Class, Characteristic
- altLabel
- complete decomposition temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A property denoting temperature above which CNT material is fully decomposed/oxidized in TGA under ambient atmosphere (°C).
Carbon Nanotube Decomposition Onset Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonNanotubeDecompositionOnsetTemperature- Type
- Class, Characteristic
- altLabel
- decomposition onset
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A property denoting temperature at which CO2 evolution / CNT decomposition is first observed in TG-MS under ambient atmosphere (°C).
Carbon Nanotube Forest
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonNanotubeForest- Type
- Class, Matter
- altLabel
- CNT forest; vertically aligned CNT forest; vertically aligned carbon nanotubes
A material entity corresponding to a carbon nanotube forest and used as an input in Sputter Coating and Raman Spectroscopy Measurement.
Carbon Nanotube Forest Height
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonNanotubeForestHeight- Type
- Class, Characteristic
- altLabel
- CNT forest height; forest height
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting carbon nanotube forest height and determined in Electron Microscopy Imaging and Scanning Electron Microscopy Imaging.
Carbon Nanotube Outer Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonNanotubeOuterDiameter- Type
- Class, Characteristic
- altLabel
- CNT diameter; VACNT diameter; outer nanotube diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting carbon nanotube outer diameter and determined in Electron Microscopy Imaging and Transmission Electron Microscopy Imaging.
Carbon Nanotube Wall Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonNanotubeWallCount- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A property denoting number of concentric graphene walls in a multiwalled carbon nanotube (TEM).
Carbon Nitrogen Defect Fraction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonNitrogenDefectFractionPercent- Type
- Class, Characteristic
- altLabel
- C-N; carbon-nitrogen defects
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting percent contribution of carbon-nitrogen defect component in C 1s XPS deconvolution.
Carbon Oxide Fraction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonOxideFractionPercent- Type
- Class, Characteristic
- altLabel
- $Cx0y$; C_xO_y
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting percent contribution of carbon oxide component in C 1s XPS deconvolution.
Carbon Pretreatment Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonPretreatmentProcess- Type
- Class, Manufacturing
- altLabel
- carbon pretreatment
Modified CCVD step where only carbon source (ethylene) is fed initially to form a carbon layer before introducing N-source.
Carbon Primary Particle Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonPrimaryParticleDiameter- Type
- Class, Characteristic
- altLabel
- carbon particle diameter; primary carbon nanoparticle diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting diameter of primary carbon nanoparticles observed in HRTEM (reported ~25 nm).
Carbon Shell Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonShellThickness- Type
- Class, Characteristic
- altLabel
- carbon shell thickness (graphitic planes); graphitic shell thickness
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting thickness of the graphitic shell of hollow primary carbon nanoparticles (reported ~3 nm).
Carbon Support
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonSupport- Type
- Class, Matter
- altLabel
- carbon black; porous carbon; solid carbon
A material entity corresponding to a carbon support and used as an input in Catalyst Ink Preparation, Dynamic Light Scattering Measurement, and Mercury Intrusion Porosimetry Measurement.
Carbon Support Accessibility
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonSupportAccessibility- Type
- Class, Compatibility
- altLabel
- accessible mesopores
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AccessibilityIndex
A quantitative characteristic that represents carbon support accessibility for a material, component, process, measurement, or hydrogen-electrochemical system.
Carbon To Oxygen Atom Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonToOxygenAtomRatio- Type
- Class, Characteristic
- altLabel
- C/0 atom ratio; C/O; C/O atom ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting carbon-to-oxygen atomic ratio reported from XPS.
Carbon To Surfactant Weight Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonToSurfactantWeightRatio- Type
- Class, Characteristic
- altLabel
- NG:surfactant mass ratio; surfactant-to-NG ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A dimensionless characteristic expressing the stated ratio identified as Carbon To Surfactant Weight Ratio.
Carbon Weight Percent In Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonWeightPercentInCatalyst- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting carbon weight percent in catalyst.
Carbon Xerogel X 85
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonXerogelX85- Type
- Class, Matter
- altLabel
- X85; carbon xerogel; homemade carbon xerogel
Homemade carbon xerogel support (X85) with tunable particle size; used as model carbon support.
Carbon Yield
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonYield- Type
- Class, Characteristic
- altLabel
- char yield
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
Mass of the carbonaceous residue remaining after a specified pyrolysis treatment divided by the initial dry precursor mass, expressed as a fraction or percentage.
Carbon-support water contact angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonSupportWaterContactAngle- Type
- Class, Characteristic
- altLabel
- catalyst support contact angle
- notation
- thetaC
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle | http://qudt.org/vocab/unit/DEG | Value-free QUDT guidance for Carbon-support water contact angle; the curated source reports [deg].
Water contact angle of the bare carbon-support surface used to describe its intrinsic wettability.
Carbon-support-induced ionomer alignment degree
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbonSupportInducedIonomerAlignmentDegree- Type
- Class, Characteristic
- notation
- deltaDA,C
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for Carbon-support-induced ionomer alignment degree; the curated source reports [-].
Degree of molecular alignment induced in the adjacent ionomer film by the carbon-support surface.
Carbonized 3 D Printed Carbon Material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Carbonized3DPrintedCarbonMaterial- Type
- Class, Matter
- altLabel
- carbonized 3D-printed structure
Final carbon material after drying/reduction at 250°C (air) and annealing/pyrolysis to 1000°C (Ar); characterized by XRD/Raman/adsorption/conductivity/mechanics.
Carbothermal Graphitization Annealing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarbothermalGraphitizationAnnealing- Type
- Class, Manufacturing
- altLabel
- annealed; catalytic carbothermal graphitization
High-temperature annealing under N2 (e.g., 1000°C) to promote Fe-catalyzed graphitization to graphene flakes.
Cardo Based Acrylic Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CardoBasedAcrylicResin- Type
- Class, Matter
- altLabel
- acrylated cardo oligomers
An acrylic resin or acrylated oligomer containing bulky cyclic cardo units joined to the polymer or oligomer chain through a common atom.
Carrier Gas Flow
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CarrierGasFlow- Type
- Class, Characteristic
- altLabel
- H2 flow; N2 flow; air flow
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFlowRate | http://qudt.org/vocab/unit/CentiM3-PER-MIN
Rate at which an identified carrier gas is supplied through the specified process boundary, expressed on a declared volumetric, amount-of-substance, or mass basis.
Castor Oil
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CastorOil- Type
- Class, Matter
- altLabel
- CO
A material entity corresponding to a castor oil and used as an input in Acid Base Titration Measurement, Gas Chromatography Measurement, and Iodine Value Measurement.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_140618 (castor oil)
Catalyst And Ionomer To PEG Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystAndIonomerToPEGRatio- Type
- Class, Compatibility
- altLabel
- (cat+ionomer):PEG; PEG200-3; ratio of catalyst and ionomer to PEG
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A composition characteristic that represents catalyst and ionomer to peg ratio for a material, component, process, measurement, or hydrogen-electrochemical system.
Catalyst Coated Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystCoatedMembrane- Type
- Class, Matter
- altLabel
- CCM; catalyst-coated membrane (CCM) method; catalyst-coated membranes
A membrane with catalyst layers directly coated on the membrane (CCM). Central object of review.
Catalyst Coated Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystCoatedSubstrate- Type
- Class, Matter
- altLabel
- CCS
A substrate bearing an applied layer containing a catalyst.
Catalyst Impregnation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystImpregnation- Type
- Class, Manufacturing
- altLabel
- incipient wetness impregnation; wetness impregnation
A manufacturing process for catalyst impregnation using Support Material and Precursor Solution with Oven and producing Impregnated Support.
Catalyst Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystInk- Type
- Class, Matter
- altLabel
- HC catalyst ink; PFSA reference ink; catalyst solution
A liquid formulation containing dispersed catalyst particles, optionally with a catalyst support, binder or ionomer, and other additives, intended for deposition of a catalyst-containing layer.
Catalyst Ink Preparation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystInkPreparation- Type
- Class, Manufacturing
- altLabel
- catalyst ink; ink preparation; suspension preparation
A manufacturing process for catalyst ink preparation using Catalyst Powder, Solvent, and Ionomer Solution with Magnetic Stirrer, Ultrasonicator, and Planetary Mixer and producing Catalyst Ink, PDL Ag NW Composite Ink, and Solvent Mixture.
Catalyst Ink Structure Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystInkStructureDataset- Type
- Class, Data
- altLabel
- catalyst ink structure; ink structure data; structural parameters dataset
A dataset containing catalyst ink structure data generated by Catalyst Ink Preparation, Dynamic Light Scattering Measurement, and Contrast Variation SANSUSANS Measurement.
Catalyst Layer Acid Loading Determination
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerAcidLoadingDetermination- Type
- Class, Measurement
CL H3PO4 loading estimated from mass difference before/after doping; not found in ontology.
Catalyst Layer Composition Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerCompositionSpecification- Type
- Class, Specification
- altLabel
- CL composition specification
A specification of catalyst-layer constituent identities and their amounts or fractions, including the reference bases and applicable composition constraints.
Catalyst Layer Conductivity Exponent B
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerConductivityExponentB- Type
- Class, Compatibility
- altLabel
- B; CL conductivity exponent B
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A transport characteristic that represents catalyst layer conductivity exponent b for a material, component, process, measurement, or hydrogen-electrochemical system.
Catalyst Layer Conductivity Prefactor A
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerConductivityPrefactorA- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricalConductivity
A transport characteristic that represents catalyst layer conductivity prefactor a for a material, component, process, measurement, or hydrogen-electrochemical system.
Catalyst Layer Microstructure Simulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerMicrostructureSimulation- Type
- Class, Process
- altLabel
- catalyst layer simulation
A computational model execution that reconstructs or predicts the spatial arrangement of catalyst-layer constituents and may calculate associated connectivity, porosity, tortuosity, or effective transport properties.
Catalyst Layer Morphology
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerMorphology- Type
- Class, Characteristic
- altLabel
- cracked mudflat morphology; mud-crack morphology; surface morphology
A property denoting qualitative morphology of sprayed catalyst layer surface (e.g., cracked mudflat vs loose particle deposits) inferred from SEM.
Catalyst Layer Porosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerPorosity- Type
- Class, Characteristic
- altLabel
- CL porosity; ε_CL; ε_V
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A morphological characteristic describing catalyst layer porosity under the conditions and reference basis stated with the record.
Catalyst Layer Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerThickness- Type
- Class, Characteristic
- altLabel
- cathode CL thickness; δC; δ_CL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/MicroM
A thickness characteristic representing the distance between the opposing bounding surfaces of a catalyst layer.
Catalyst Layer Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerThickness_2- Type
- Class, Compatibility
- altLabel
- CL thickness
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A that represents catalyst layer thickness for a material, component, process, measurement, or hydrogen-electrochemical system.
Catalyst Layer Thickness Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerThicknessMeasurement- Type
- Class, Measurement
- altLabel
- catalyst layer thickness; cathode catalyst layer thickness; thickness measurement (ImageJ from SEM cross-sections)
Thickness-characterization measurement used to determine membrane and catalyst-layer thickness values, including anode- and cathode-side layer thickness when reported separately.
Catalyst Layer Tortuosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerTortuosity- Type
- Class, Characteristic
- altLabel
- geometric tortuosity; tau_geo
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS
Ratio of a specified mean connected path length through the catalyst-layer pore network to the straight through-layer distance in the selected direction.
Catalyst Layer Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerVolume- Type
- Class, NormalizationBasis
A normalization basis corresponding to catalyst layer volume and used as the reference basis for reporting quantitative results or properties.
Catalyst Loading
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLoading- Type
- Class, Characteristic
- altLabel
- Pt loading; anode Pt loading; target Pt loading
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerArea | http://qudt.org/vocab/unit/MilliGM-PER-CentiM2
http://qudt.org/vocab/quantitykind/MassPerArea
Mass of an explicitly identified catalyst component deposited in an electrode divided by the geometric electrode area carrying that component.
Catalyst Loading Determination
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLoadingDetermination- Type
- Class, Measurement
- altLabel
- Pt loading determination; catalyst loading measured by XRF; catalyst loading measurement
Determination of Pt loading (mg_Pt/cm2) by weighing and Pt wt% of catalyst.
Catalyst Loading Pattern
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLoadingPattern- Type
- Class, Characteristic
- altLabel
- full loading pattern; loading pattern; strip pattern
Categorical description of the spatial arrangement of deposited catalyst within an electrode, including a continuous full-area coating or a specified arrangement of coated and uncoated segments.
Catalyst Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystMass- Type
- Class, Characteristic
- altLabel
- Pt mass; catalyst mass (excluding ionomer); total catalyst mass
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
Mass of the identified catalyst material used as a specimen quantity or normalization basis, excluding separately added ionomer and solvent unless these are explicitly part of the identified material.
Catalyst Mass Concentration In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystMassConcentrationInInk- Type
- Class, Compatibility
- altLabel
- CQD ink concentration; ink concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassConcentration
A composition characteristic that represents catalyst mass concentration in ink for a material, component, process, measurement, or hydrogen-electrochemical system.
Catalyst Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystMassFractionInInk- Type
- Class, Characteristic
- altLabel
- IrO2 contents in the ink
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Catalyst Mass Fraction In Ink.
Catalyst Mass Fraction In Ink Solids
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystMassFractionInInkSolids- Type
- Class, Characteristic
- altLabel
- Pt/C (wt%) of total solid content; Pt/C wt% in ink solids; catalyst fraction in ink solids
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Catalyst Mass Fraction In Ink Solids.
Catalyst material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystMaterial- Type
- Class, Matter
A material entity that increases the rate of a chemical or electrochemical reaction without being consumed stoichiometrically by that reaction.
- subclasses
- Acid Leached Steam Activated Fe NC Catalyst, Catalyst Coated Substrate, Catalyst Powder, CI Co Composite Catalyst, CI Fe Composite Catalyst, Co AA Pyr Catalyst, Co Mn AA Pyr Catalyst, Co NC Catalyst, Co Ni AA Pyr Catalyst, Electrocatalyst, Fe AA Pyr Catalyst, Fe Co AA Pyr Catalyst, Fe Co Bimetallic Catalyst, Fe Mn AA Pyr Catalyst, Fe NC Catalyst, Fe Ni AA Pyr Catalyst, FU Ndoped Carbon Catalyst, Geopolymer Lattice Catalyst, GU Ndoped Carbon Catalyst, Iridium Oxide Catalyst, Iron Iron Oxide Catalyst Nanoparticle, Manganese Dioxide Catalyst, Mn AA Pyr Catalyst, Ni AA Pyr Catalyst, Ni Mg Al Mixed Oxide Catalyst, Ni PB Catalyst, NSPCN Fs Catalyst, Platinum Black Catalyst, Pt Alloy Catalyst, Pt Ketjen Black Catalyst, Pt Mesoporous Carbon Catalyst, Pt NCNT Fs Catalyst, Pt On Nb B 2 Catalyst, Pt On Orange Peel Activated Carbon Catalyst, Pt Ru Black Catalyst, Steam Activated Fe NC Catalyst
Catalyst Particle Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystParticleDiameter- Type
- Class, Characteristic
- altLabel
- diameter of catalyst particle
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A particle-size characteristic equal to the distance across a catalyst particle through its center under the adopted particle-shape and measurement convention.
Catalyst Particle Surface Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystParticleSurfaceArea- Type
- Class, Characteristic
- altLabel
- SIRT/DART; Surface area [nm²]; accessible surface area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
A property denoting 3D reconstructed accessible surface area of a Pt/Ru catalyst network from electron tomography.
Mappings
- skos:broadMatch
http://emmo.info/emmo#EMMO_96f39f77_44dc_491b_8fa7_30d887fe0890 (Area) - skos:broadMatch
http://semanticscience.org/resource/SIO_000045 (area) - skos:broadMatch
https://saref.etsi.org/saref4inma/Area (Area)
Catalyst Particle Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystParticleVolume- Type
- Class, Characteristic
- altLabel
- SIRT/DART; Volume [nm³]; reconstructed volume
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A property denoting 3D reconstructed volume of a Pt/Ru catalyst network from electron tomography.
Catalyst Platinum Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystPlatinumMassFraction- Type
- Class, Characteristic
- altLabel
- Pt fraction in catalyst; Pt fraction in catalyst (0.20); Pt mass fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the mass of catalyst platinum divided by the stated total reference mass.
Catalyst Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystPowder- Type
- Class, Matter
- altLabel
- Umicore Elyst catalyst
A material entity corresponding to a catalyst powder and used as an input in Catalyst Ink Preparation.
Catalyst Ruthenium Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystRutheniumMassFraction- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting ruthenium mass fraction in PtRu black catalyst from EDX.
Catalyst Suspension Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystSuspensionConcentration- Type
- Class, Compatibility
- altLabel
- NG concentration; dilution concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassConcentration
A composition characteristic that represents catalyst suspension concentration for a material, component, process, measurement, or hydrogen-electrochemical system.
Catalyst To Binder Mass Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystToBinderMassRatio- Type
- Class, Characteristic
- altLabel
- Pt black to sPEEK ratio (19:1)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Ratio
A dimensionless characteristic expressing the stated ratio identified as Catalyst To Binder Mass Ratio.
Catalyst To Nafion Solution Mass Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystToNafionSolutionMassRatio- Type
- Class, Characteristic
- altLabel
- ratio of 7:3
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Ratio
A dimensionless characteristic expressing the stated ratio identified as Catalyst To Nafion Solution Mass Ratio.
Catalyst To Nafion Weight Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystToNafionWeightRatio- Type
- Class, Characteristic
- altLabel
- N/C; Nafion-to-carbon ratio; catalyst:Nafion weight ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
http://qudt.org/vocab/quantitykind/MassRatio
Dry mass of the catalyst material, including any additives that the source explicitly groups with it, divided by the dry mass of Nafion polymer in the same formulation.
Catalyst Transfer Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystTransferRate- Type
- Class, Characteristic
- altLabel
- decal transfer rate; degree of catalyst transfer; transfer rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction/percent of catalyst layer transferred from substrate to membrane during decal transfer.
Catalyst Weight Percent In Oil
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystWeightPercentInOil- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
Mass of catalyst added to the reaction divided by the initial oil mass and multiplied by 100.
Catalyst Wetting Drying Treatment
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystWettingDryingTreatment- Type
- Class, Manufacturing
- altLabel
- wetting and subsequent drying; wetting treatment; wetting/drying treatment
A manufacturing process for catalyst wetting drying treatment using Fe NC Catalyst and Water.
Catalyst-layer component
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalystLayerComponent- Type
- Class, Matter
An electrode component containing catalyst and ion-conducting or binding phases arranged to support electrochemical reaction and transport.
Catalyzed Diffusion Medium Method
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CatalyzedDiffusionMediumMethod- Type
- Class, Manufacturing
- altLabel
- catalyzed diffusion medium (CDM) method
A membrane-electrode fabrication route in which catalyst is deposited on a gas-diffusion medium to form a gas-diffusion electrode that is subsequently combined with a membrane.
Categorical characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CategoricalCharacteristic- Type
- Class, Characteristic
A property whose value is expressed as a category, state, type, mode, or controlled qualitative descriptor.
Cathode Capacitance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeCapacitance- Type
- Class, Characteristic
- altLabel
- Cc
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Capacitance
A property denoting description=Cathode capacitance (Cc) extracted from cathode potential slope during discharge (F).
Cathode Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeCatalystLayer- Type
- Class, Matter
- altLabel
- CCL; catalyst layer; catalyst layer (CL)
A catalyst-containing electrode layer that supports the cathodic reduction reaction and the associated electronic, ionic, and reactant transport pathways.
Cathode Catalyst Layer Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeCatalystLayerThickness- Type
- Class, Characteristic
- altLabel
- CCL thickness
A property denoting the thickness of a cathode catalyst layer.
Cathode Catalyst Loading
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeCatalystLoading- Type
- Class, Characteristic
- altLabel
- catalyst loading in air-breathing cathode; cathode Pd/C loading; cathode Pt loading
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ArealMassLoading
Mass of the specified catalyst material in the cathode divided by the geometric electrode area over which that material is deposited.
Cathode Gas Composition
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeGasComposition- Type
- Class, Characteristic
- altLabel
- cathode gas species
A composition characteristic specifying cathode gas composition under the conditions and reference basis stated with the record.
Cathode Gas Volumetric Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeGasVolumetricFlowRate- Type
- Class, Characteristic
- altLabel
- cathode gas flow rate
A transport characteristic specifying the quantity of cathode gas volumetric passing a reference boundary per unit time.
Cathode GDE
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeGDE- Type
- Class, Matter
- altLabel
- GDE; PGM-free cathode GDE; Pt-C/Nafion GDE
A gas-diffusion electrode configured for the cathodic reaction, with a porous structure that enables gas transport to or from the reaction layer and provides electronic conduction.
Cathode MPL Carbon Support Loading
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeMPLCarbonSupportLoading- Type
- Class, Characteristic
- altLabel
- carbon black loading in the cathode MPL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ArealMassLoading
Mass of carbon material in the cathode microporous layer divided by the geometric area coated by that microporous layer.
Cathode Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodePotential- Type
- Class, Characteristic
- altLabel
- MFC-CICo; MFC-CIFe; electrode potential
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
A property denoting cathode electrode potential vs reference electrode at specified current density or open circuit.
Cathode Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeResistance- Type
- Class, Characteristic
- altLabel
- Rc
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricResistance | http://qudt.org/vocab/unit/OHM
A property denoting description=Cathode resistance extracted from cathode ohmic drop during pulse (Ohm).
Cathode Starvation Activation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeStarvationActivation- Type
- Class, Process
- altLabel
- cathode starvation
An electrochemical conditioning process that restricts cathode oxygen supply under controlled operation to establish reducing or hydrogen-evolving cathode conditions for membrane-electrode activation.
Cathode Stoichiometric Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodeStoichiometricRatio- Type
- Class, Characteristic
- altLabel
- cathode stoichiometry; λ_ca; λ_cathode
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS
Ratio of the molar oxygen supply rate to the cathode to the stoichiometric oxygen-consumption rate corresponding to the operating current; for a single hydrogen fuel cell the latter is I/(4F).
Cathodic Stripping Peak Current
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodicStrippingPeakCurrent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrent | http://qudt.org/vocab/unit/MicroA
A property denoting cathodic stripping peak current and determined in Cathodic Stripping Voltammetry.
Cathodic Stripping Voltammetry
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CathodicStrippingVoltammetry- Type
- Class, Measurement
A measurement process that uses cathodic stripping voltammetry to determine Cathodic Stripping Peak Current and Peak Potential using Electrochemical Workstation and generating Experiment Dataset.
CCL accessible primary-pore volume fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLAccessiblePrimaryPoreVolumeFraction- Type
- Class, Characteristic
- altLabel
- CCL fraction of primary pores
- notation
- X1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL accessible primary-pore volume fraction; the curated source reports [-].
Normalized fraction of the remaining accessible cathode-catalyst-layer pore volume belonging to primary pores after accounting for ionomer filling.
CCL accessible secondary-pore volume fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLAccessibleSecondaryPoreVolumeFraction- Type
- Class, Characteristic
- altLabel
- CCL fraction of secondary pores
- notation
- X2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL accessible secondary-pore volume fraction; the curated source reports [-].
Normalized fraction of the remaining accessible cathode-catalyst-layer pore volume belonging to secondary pores after accounting for ionomer filling.
CCL contact-angle-distribution data
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLContactAngleDistributionData- Type
- Class, Data
- altLabel
- CCL contact angle distribution
- notation
- CAD
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL contact-angle-distribution data; the curated source reports [-].
Normalized cathode-catalyst-layer contact-angle distribution on the specified cosine grid, combining primary- and secondary-pore contributions.
CCL contact-angle-distribution dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLContactAngleDistributionDataset- Type
- Class, Data
A dataset profile containing a contact-angle-cosine axis and corresponding CCL contact-angle distribution.
CCL effective ionomer coverage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLEffectiveIonomerCoverage- Type
- Class, Characteristic
- notation
- aion
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL effective ionomer coverage; the curated source reports [-].
Fraction of the total secondary-pore surface covered by ionomer in a cathode catalyst layer.
CCL hydrophilic-pore mean contact angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLHydrophilicPoreMeanContactAngle- Type
- Class, Characteristic
- altLabel
- CCL mean contact angle of hydrophilic pores
- notation
- thetaCCL,HI
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle | http://qudt.org/vocab/unit/DEG | Value-free QUDT guidance for CCL hydrophilic-pore mean contact angle; the curated source reports [deg].
Pore-volume-weighted arithmetic mean of contact angles below 90 degrees, considering cathode-catalyst-layer pore volume remaining after ionomer filling.
CCL hydrophobic-pore mean contact angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLHydrophobicPoreMeanContactAngle- Type
- Class, Characteristic
- altLabel
- CCL mean contact angle of hydrophobic pores
- notation
- thetaCCL,HO
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle | http://qudt.org/vocab/unit/DEG | Value-free QUDT guidance for CCL hydrophobic-pore mean contact angle; the curated source reports [deg].
Pore-volume-weighted arithmetic mean of contact angles above 90 degrees, considering cathode-catalyst-layer pore volume remaining after ionomer filling.
CCL ionomer alignment degree
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLIonomerAlignmentDegree- Type
- Class, Characteristic
- altLabel
- CCL degree of alignment of ionomer film
- notation
- deltaDA
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL ionomer alignment degree; the curated source reports [-].
Degree of alignment of ionomer sidechains and backbones after accounting for the platinum-on-carbon surface and the decay of alignment with film thickness.
CCL mean contact angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLMeanContactAngle- Type
- Class, Characteristic
- notation
- thetaCCL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle | http://qudt.org/vocab/unit/DEG | Value-free QUDT guidance for CCL mean contact angle; the curated source reports [deg].
Arithmetic mean of local cathode-catalyst-layer pore contact angles, with primary- and secondary-pore distributions weighted by their shares of total pore volume remaining after ionomer filling.
CCL primary-pore geometric-mean radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLPrimaryPoreRadiusGeometricMean- Type
- Class, Characteristic
- altLabel
- geometric mean pore radius for CCL primary pores
- notation
- rmu1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/M | Value-free QUDT guidance for CCL primary-pore geometric-mean radius; the curated source reports [m].
Geometric mean, equal to the median, of the volume-weighted lognormal pore-radius distribution for primary pores in a cathode catalyst layer.
CCL primary-pore logarithmic radius deviation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLPrimaryPoreRadiusLogarithmicStandardDeviation- Type
- Class, Characteristic
- altLabel
- logarithmic standard deviation of CCL primary-pore radii
- notation
- sigmaR1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL primary-pore logarithmic radius deviation; the curated source reports [-].
Dimensionless standard deviation in the volume-weighted lognormal distribution of primary-pore radii, calculated using the natural logarithm.
CCL primary-pore specific surface area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLPrimaryPoreSpecificSurfaceArea- Type
- Class, Characteristic
- altLabel
- CCL pore area of primary pores
- notation
- A1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SpecificSurfaceArea | http://qudt.org/vocab/unit/M2-PER-GM | Value-free QUDT guidance for CCL primary-pore specific surface area; the curated source reports [m^2/gC]. Values are normalized per unit carbon mass.
Specific surface area of the primary-pore domain of the ionomer-free reference structure per unit carbon mass, calculated from the primary-pore size distribution.
CCL primary-pore volume fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLPrimaryPoreVolumeFraction- Type
- Class, Characteristic
- altLabel
- volume fraction of primary pores inside CCL
- notation
- phi1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL primary-pore volume fraction; the curated source reports [-].
Fraction of the total pore volume assigned to primary pores in the ionomer-free platinum-on-carbon structure of a cathode catalyst layer.
CCL refined pore-size-distribution data
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLRefinedPoreSizeDistributionData- Type
- Class, Data
- altLabel
- CCL refined pore size distribution
- notation
- PSD
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL refined pore-size-distribution data; the curated source reports [-].
Normalized pore-volume density per natural-logarithmic interval of pore radius, combining primary and secondary pores after accounting for ionomer filling.
CCL refined pore-size-distribution dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLRefinedPoreSizeDistributionDataset- Type
- Class, Data
A dataset profile containing a pore-radius axis and corresponding refined CCL pore-size distribution.
CCL secondary-pore geometric-mean radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLSecondaryPoreRadiusGeometricMean- Type
- Class, Characteristic
- altLabel
- geometric mean pore radius for CCL secondary pores
- notation
- rmu2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/M | Value-free QUDT guidance for CCL secondary-pore geometric-mean radius; the curated source reports [m].
Geometric mean, equal to the median, of the volume-weighted lognormal pore-radius distribution for secondary pores in a cathode catalyst layer.
CCL secondary-pore hydrophobic volume fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLSecondaryPoreHydrophobicVolumeFraction- Type
- Class, Characteristic
- altLabel
- CCL hydrophobic fraction of secondary pores
- notation
- XHO
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL secondary-pore hydrophobic volume fraction; the curated source reports [-].
Fraction of secondary-pore volume with hydrophobic wetting behavior, corresponding to contact angles greater than 90 degrees.
CCL secondary-pore logarithmic radius deviation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLSecondaryPoreRadiusLogarithmicStandardDeviation- Type
- Class, Characteristic
- altLabel
- logarithmic standard deviation of CCL secondary-pore radii
- notation
- sigmaR2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL secondary-pore logarithmic radius deviation; the curated source reports [-].
Dimensionless standard deviation in the volume-weighted lognormal distribution of secondary-pore radii, calculated using the natural logarithm.
CCL secondary-pore specific surface area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLSecondaryPoreSpecificSurfaceArea- Type
- Class, Characteristic
- altLabel
- CCL pore area of secondary pores
- notation
- A2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SpecificSurfaceArea | http://qudt.org/vocab/unit/M2-PER-GM | Value-free QUDT guidance for CCL secondary-pore specific surface area; the curated source reports [m^2/gC]. Values are normalized per unit carbon mass.
Specific surface area of the secondary-pore domain of the ionomer-free reference structure per unit carbon mass, calculated from the secondary-pore size distribution.
CCL secondary-pore volume fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLSecondaryPoreVolumeFraction- Type
- Class, Characteristic
- altLabel
- volume fraction of secondary pores inside CCL
- notation
- phi2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL secondary-pore volume fraction; the curated source reports [-].
Fraction of the total pore volume assigned to secondary pores in the ionomer-free platinum-on-carbon structure of a cathode catalyst layer.
CCL total-pore specific surface area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLTotalPoreSpecificSurfaceArea- Type
- Class, Characteristic
- altLabel
- CCL total pore area
- notation
- Apores
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SpecificSurfaceArea | http://qudt.org/vocab/unit/M2-PER-GM | Value-free QUDT guidance for CCL total-pore specific surface area; the curated source reports [m^2/gC]. Values are normalized per unit carbon mass.
Total specific surface area of the primary- and secondary-pore network of the ionomer-free cathode-catalyst-layer reference structure per unit carbon mass.
CCL water-retention-curve dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLWaterRetentionCurveDataset- Type
- Class, Data
A dataset profile containing the capillary-pressure axis and corresponding CCL water-saturation array.
CCL water-saturation data
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CCLWaterSaturationData- Type
- Class, Data
- altLabel
- CCL water saturation for WRC
- notation
- Sr
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for CCL water-saturation data; the curated source reports [-].
Array giving the fraction of cathode-catalyst-layer pore volume flooded with liquid water at each capillary pressure in the water-retention curve.
Cd Se Zn S Quantum Dot
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CdSeZnSQuantumDot- Type
- Class, Matter
Specific quantum-dot composition used as model (green CdSe@ZnS core–shell QDs).
Cell Active Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellActiveArea- Type
- Class, Characteristic
- altLabel
- MEA active area; active area; geometric area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
http://qudt.org/vocab/quantitykind/Area
A geometric characteristic specifying the area associated with cell active.
Mappings
- skos:broadMatch
http://emmo.info/emmo#EMMO_96f39f77_44dc_491b_8fa7_30d887fe0890 (Area) - skos:broadMatch
http://semanticscience.org/resource/SIO_000045 (area) - skos:broadMatch
https://saref.etsi.org/saref4inma/Area (Area) - skos:broadMatch
https://w3id.org/nfdi4cat/voc4cat_0007258 (active area)
Cell assembly
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellAssembly- Type
- Class, Matter
An electrochemical component formed by assembling functional layers or parts into a cell-level structure.
Cell Capacitance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellCapacitance- Type
- Class, Characteristic
- altLabel
- Ccell; apparent capacitance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Capacitance
A property denoting description=Apparent cell capacitance (Ccell) extracted from voltage slope during discharge (F).
Cell Length
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellLength- Type
- Class, Characteristic
- altLabel
- length (mm)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the length of cell.
Cell Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellPressure- Type
- Class, Characteristic
- altLabel
- average cell pressure; gas pressure; kPa_abs
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure | http://qudt.org/vocab/unit/BAR
http://qudt.org/vocab/quantitykind/Pressure
A pressure characteristic specifying the pressure associated with cell.
Cell Seeding Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellSeedingDensity- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/NumberArealDensity
A density characteristic that represents cell seeding density for a material, component, process, measurement, or hydrogen-electrochemical system.
Cell Voltage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellVoltage- Type
- Class, Characteristic
- altLabel
- U; applied voltage; cell potential
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotentialDifference | http://qudt.org/vocab/unit/V
A property denoting fuel cell cell voltage (V) under galvanostatic operation.
Cell Voltage Increase Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellVoltageIncreaseRate- Type
- Class, Characteristic
- altLabel
- increase in iR-corrected cell voltage
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VoltageChangeRate
A property denoting Rate of increase of (iR-corrected) cell voltage during long-term galvanostatic stability test (mV/h).
Cell Voltage Loss
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellVoltageLoss- Type
- Class, Characteristic
- altLabel
- mV loss; mV loss at current density; voltage loss
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
A property denoting cell voltage loss and determined in MEA Durability Measurement.
Cell Voltage Loss Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellVoltageLossPercent- Type
- Class, Characteristic
- altLabel
- voltage loss %
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting percent loss in cell voltage over a defined durability interval at constant current.
Cell Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CellWidth- Type
- Class, Characteristic
- altLabel
- width (mm)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the width of cell.
Centrifugal Acceleration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CentrifugalAcceleration- Type
- Class, Characteristic
- altLabel
- RCF
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A dimensionless characteristic expressing the stated ratio identified as Centrifugal Acceleration.
Centrifugation Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CentrifugationProcess- Type
- Class, Manufacturing
- altLabel
- centrifugal concentration; centrifuged; centrifuging
Separation step to isolate modified catalyst solids after polymerization.
Centrifugation Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CentrifugationSpeed- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/RotationalSpeed
A rate characteristic specifying the speed associated with centrifugation.
Centrifugation Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CentrifugationTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with centrifugation.
Centrifuge
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Centrifuge- Type
- Class, Instrument
An instrument that rotates samples to apply centrifugal acceleration for separation, sedimentation, or removal of entrained gas.
Ceramic Colloid Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CeramicColloidInk- Type
- Class, Matter
A material entity corresponding to a ceramic colloid ink and used as an input in Rheology Measurement and Direct Ink Writing.
Ceramic Yield
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CeramicYield- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting mass fraction retained after pyrolysis (reported up to 70%).
Cesium Formate Solution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CesiumFormateSolution- Type
- Class, Matter
- altLabel
- aqueous cesium formate; density float solutions
Aqueous Cs formate solutions (1.4–2.0 g/cm3) used as density floats to determine skeletal density of carbonized structures.
Channel To Spacer Area Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChannelToSpacerAreaRatio- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A dimensionless characteristic expressing the stated ratio identified as Channel To Spacer Area Ratio.
Characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Characteristic- Type
- Class, Characteristic
A dependent feature that can characterize a material, component, process, dataset, or system.
Characterization measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CharacterizationMeasurement- Type
- Class, Measurement
A measurement that acquires data for determining one or more characteristics of a material, component, or system.
- subclasses
- Accelerated Stress Test Voltage Cycling, Acid Uptake Measurement, Adsorption measurement, ATRFTIR Measurement, Catalyst Layer Acid Loading Determination, Catalyst Loading Determination, Coating Mass Measurement, Coating Weight Measurement, Cold Start Test, Composition measurement, Contrast Variation SANSUSANS Measurement, Crack Characterization Measurement, Crush Strength Measurement, Decal Transfer Evaluation Measurement, Diffraction measurement, Dry Reforming Of Methane Performance Measurement, ECSA by Double-Layer Capacitance, Electrochemical measurement, Ex Situ Hydration Test, Fenton Oxidative Stability Measurement, Furfural Hydrogenation Reaction Measurement, Gas Crossover Method, Hall Effect Measurement, Humidity Sweep Measurement, Imaging measurement, Immunofluorescence Cytocompatibility Assay, Incident Photon To Current Efficiency Measurement, Iodine Value Measurement, Ion Exchange Capacity Measurement, Limiting Current Measurement, Linear Shrinkage Measurement, MEA Durability Measurement, Mechanical measurement, Membrane Area Expansion Measurement, Membrane Swelling Measurement, Methanol Oxidation Reaction Measurement, O2–N2 Switching Measurement, Optical measurement, Oxygen Gain/Loss Measurement, Particle-characterization measurement, Photocatalytic Degradation Measurement, Photovoltaic JV Measurement, Physical-property measurement, Polymer Characterization Measurement, Porosimetry measurement, Quartz Crystal Microbalance Measurement, Reference Electrode Calibration Measurement, Rheological measurement, Scattering measurement, Screen Mesh Characterization Measurement, Solvent Property Measurement, Spectroscopic ellipsometry, Spectroscopy measurement, Stylus Profilometry Measurement, Surface Basicity Measurement, Thermal measurement, Transesterification Performance Measurement, Transport measurement, Visual Inspection Stability Measurement, Zeta Potential Measurement
Charge Discharge Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChargeDischargeDataset- Type
- Class, Data
- altLabel
- charge/discharge profile; cycling data
A dataset containing charge discharge data generated by Galvanostatic Charge Discharge Measurement.
Charge Storage Capacity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChargeStorageCapacity- Type
- Class, Characteristic
- altLabel
- CSC
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ChargePerArea
A property denoting integrated charge per area obtained from cyclic voltammograms; used as indicator of electrode charge storage and percolation onset.
Charge Transfer Coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChargeTransferCoefficient- Type
- Class, Characteristic
- altLabel
- alpha_c; electron transfer coefficient; α_c
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
An electrochemical characteristic specifying charge transfer coefficient under the conditions and reference basis stated with the record.
Charge Transfer Plus Mass Transport Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChargeTransferPlusMassTransportResistance- Type
- Class, Characteristic
- altLabel
- Rct+Rm; large semicircle resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance
A property denoting paper reports fitted EIS component as combined (Rct + Rm) and does not separate components.
Charge Transfer Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChargeTransferResistance- Type
- Class, Characteristic
- altLabel
- R_ct; charge transfer resistivity; faradaic resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Resistance | http://qudt.org/vocab/unit/OHM
http://qudt.org/vocab/quantitykind/ChargeTransferResistance
A property denoting charge transfer resistance and determined in Electrochemical Impedance Spectroscopy Potentiostatic, Electrochemical Impedance Spectroscopy Galvanostatic, and Distribution Of Relaxation Times Analysis.
Chemical reaction process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChemicalReactionProcess- Type
- Class, Manufacturing
A material-processing operation in which chemical bonds are formed, broken, or rearranged to transform one or more material inputs.
Chemical substance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChemicalSubstance- Type
- Class, Matter
A material entity consisting of chemical species with a defined or characterizable composition.
- subclasses
- Aluminum Nitrate Additive, Ammonium Hydrogen Difluoride, Anthraquinone 2 Sulfonic Acid, Carbon Dioxide, Chloroplatinic Acid Hexahydrate, Cobalt Acetate, Cobalt Hexadecanethiolate, Cobalt II Nitrate Hexahydrate, Cobalt Nitrate Hexahydrate, Copper Sulfate Pentahydrate, Dihydroxybenzene Disulfonic Acid, Formic Acid, Hydrochloric Acid, Hydrofluoric Acid, Hydrogen, Hydrogen Peroxide, Hydroiodic Acid, Mercaptopropionic Acid, Mercaptosuccinic Acid, Ni Mg Al Layered Double Hydroxide, Nickel Butanethiolate, Nickel Nitrate Hexahydrate, Nitrogen, Oleic Acid, Oleic Acid Capped Quantum Dot, Oxygen, Palladium Chloride, Phosphoric Acid, Phosphoric Acid Protonated Polybenzimidazole, Photo Acid Generator PAG 169, Poly Acrylic Acid, Potassium Hydroxide, Sodium Hydroxide, Solvent, Sulfuric Acid, Tetrabutylammonium Hydroxide
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/material#AFM_0001097 (chemical substance) - skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_59999 (chemical substance) - skos:exactMatch
http://semanticscience.org/resource/CHEMINF_000266 (Chemical substance) - skos:exactMatch
http://semanticscience.org/resource/SIO_011126 (chemical substance) - skos:exactMatch
https://openenergyplatform.org/ontology/oeo/OEO_00240027 (chemical substance)
Chloroplatinic Acid Hexahydrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChloroplatinicAcidHexahydrate- Type
- Class, Matter
Platinum precursor used to impregnate ZIF-67 prior to pyrolysis to form Pt nanoparticles on NCNTFs.
CHOSPEEK 64
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CHOSPEEK64- Type
- Class, Matter
- altLabel
- cross-linked HO-SPEEK-64
Cross-linked HO-SPEEK-64 hydrocarbon membrane/ionomer after hot-press crosslinking.
Chromatography measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChromatographyMeasurement- Type
- Class, Measurement
A composition measurement that separates mixture constituents and records their detector response for qualitative or quantitative analysis.
Chronoamperometry Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChronoamperometryMeasurement- Type
- Class, Measurement
- altLabel
- chronoamperometric measurement; chronoamperometry (I–t); continuous voltage chronoamperometry
Constant-potential current-time measurement used here for ORR durability (e.g., at 0.55 V vs RHE for 30000 s) and methanol tolerance.
Chronopotentiometry Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ChronopotentiometryMeasurement- Type
- Class, Measurement
A measurement process that applies constant current to determine cell voltage and cell-voltage increase rate over time.
CI Co Composite Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CICoCompositeCatalyst- Type
- Class, Matter
- altLabel
- CICo
Composite cathode catalyst consisting of Co3O4 blended with conductive ink (microporous conductive matrix).
CI Fe Composite Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CIFeCompositeCatalyst- Type
- Class, Matter
- altLabel
- CIFe
Composite cathode catalyst consisting of Fe3O4 blended with conductive ink (microporous conductive matrix).
CNT Growth Yield Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CNTGrowthYieldPercent- Type
- Class, Characteristic
- altLabel
- yield of obtained CNTs
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting yield of CNT growth based on fraction of catalyst particles that produce CNTs (%).
Co 2 Co 3 Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Co2Co3Ratio- Type
- Class, Characteristic
- altLabel
- Co2+/Co3+
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Ratio
Ratio of the estimated surface abundance of cobalt in oxidation state +2 to that in oxidation state +3, obtained from a declared X-ray photoelectron-spectroscopy peak-fitting model.
CO 2 Conversion
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CO2Conversion- Type
- Class, Characteristic
- altLabel
- X_CO2; carbon dioxide conversion
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ConversionFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting CO 2 conversion and determined in Dry Reforming Of Methane Performance Measurement.
Co 2 p Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Co2pAtomicPercent- Type
- Class, Characteristic
- altLabel
- Co atomic wt.%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AtomPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting atomic percent of cobalt (from Co 2p signal) measured by XPS.
Co AA Pyr Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoAAPyrCatalyst- Type
- Class, Matter
- altLabel
- Co-AAPyr
PGM-free Co-N-C catalyst prepared using aminoantipyrine (AAPyr) precursor via sacrificial support method.
Co Mn AA Pyr Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoMnAAPyrCatalyst- Type
- Class, Matter
- altLabel
- Co-Mn; Co-Mn-AAPyr
Bimetallic PGM-free Co–Mn–N–C catalyst (AAPyr-derived).
Co NC Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoNCCatalyst- Type
- Class, Matter
- altLabel
- Co-N-C; laboratory made Co–N–C catalyst
A material entity corresponding to a co NC catalyst and used as an input in Catalyst Ink Preparation.
Co Ni AA Pyr Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoNiAAPyrCatalyst- Type
- Class, Matter
- altLabel
- Co-Ni; Co-Ni-AAPyr
Bimetallic PGM-free Co–Ni–N–C catalyst (AAPyr-derived).
Co Reduction Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoReductionProcess- Type
- Class, Manufacturing
- altLabel
- co-reduction
Hydrogen reduction of blended oxides (Fe2O3+NiO+MoO3) to metals, enabling subsequent alloy formation.
CO Stripping Activation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#COStrippingActivation- Type
- Class, Process
- altLabel
- CO-stripping
A conditioning process that adsorbs carbon monoxide on an electrocatalyst and then electrochemically oxidizes and removes the adsorbed carbon monoxide to clean or activate the surface.
CO Stripping Specific Charge Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#COStrippingSpecificChargeDensity- Type
- Class, Characteristic
- altLabel
- charge density assumed for evaluating Pt surface area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ChargeArealDensity
Reference oxidation charge per unit real platinum surface area assigned to removal of a specified adsorbed carbon-monoxide coverage during CO-stripping voltammetry, used to convert integrated stripping charge to electrochemically active platinum area.
Co TMPP Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoTMPPCatalyst- Type
- Class, Compatibility
- altLabel
- CoTMPP; pyrolyzed Co porphyrin catalyst
A material entity corresponding to a co TMPP catalyst and used as an input in Catalyst Ink Preparation, Electron Microscopy Imaging, and Pyrolysis Process.
Co To N Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoToNRatio- Type
- Class, Characteristic
- altLabel
- Co/N; Co/N ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A property denoting ratio of cobalt to nitrogen signal (Co/N) reported from XPS quantification.
Coagulating Agent Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoagulatingAgentMassFraction- Type
- Class, Compatibility
- altLabel
- PEI; coagulating agent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic that represents coagulating agent mass fraction for a material, component, process, measurement, or hydrogen-electrochemical system.
Coating Air Velocity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingAirVelocity- Type
- Class, Characteristic
- altLabel
- air velocity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Velocity
A rate characteristic specifying the velocity associated with coating air.
Mappings
- skos:broadMatch
http://emmo.info/emmo#EMMO_0329f1f5_8339_4ce4_8505_a264c6d606ba (Velocity)
Coating Gap
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingGap- Type
- Class, Characteristic
- altLabel
- gap-height
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying coating gap under the conditions and reference basis stated with the record.
Coating instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingInstrument- Type
- Class, Instrument
A manufacturing instrument that deposits, casts, sprays, prints, or otherwise forms a material layer on a substrate or component.
Coating Mass Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingMassMeasurement- Type
- Class, Measurement
- altLabel
- dispensed mass measurement
Weighing Kapton support before/after coating to obtain deposited mass.
Coating or deposition process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingOrDepositionProcess- Type
- Class, Manufacturing
A material-processing operation that places a material layer or deposit onto a substrate or component.
- subclasses
- Ambient Pressure Chemical Vapor Deposition Synthesis, Atomic Layer Deposition, Brush Coating, Dip Coating Process, Direct Membrane Deposition, Doctor Blade Coating, Drop Casting Process, Electron Beam Evaporation Deposition, Electrospinning Deposition, Electrospray Deposition, Gravure Coating, Layer-by-Layer Deposition, Membrane Casting Process, Meyer Rod Coating, Plasma Enhanced Chemical Vapor Deposition Synthesis, Pulsed Laser Deposition Process, Silica Coating Process, Slot Die Coating, Spin Casting, Spray Coating, Sputter Coating, Ultrasonic Deposition Process, Ultrasonic Spray Coating
Coating Repetitions
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingRepetitions- Type
- Class, Characteristic
- altLabel
- repeated 15 times; repeated 5 times
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying coating repetitions under the conditions and reference basis stated with the record.
Coating Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingSpeed- Type
- Class, Characteristic
- altLabel
- coating rod speed; rastering speed; rod speed
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Speed
A rate characteristic specifying the speed associated with coating.
Coating Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingTemperature- Type
- Class, Characteristic
- altLabel
- deposition temperature; painting temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with coating.
Coating Weight Calculation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingWeightCalculation- Type
- Class, Process
- altLabel
- gravimetric coating analysis
A post-processing analysis process that converts gravimetric coating measurements into derived coating-weight and Pt-loading results.
Coating Weight Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingWeightMeasurement- Type
- Class, Measurement
- altLabel
- catalyst coating weight; coating weight
Gravimetric measurement process that records coating mass data on a catalyst-coated membrane for downstream Pt-loading and specific-layer-weight calculations.
Coating Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoatingWidth- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the width of coating.
Cobalt Acetate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CobaltAcetate- Type
- Class, Matter
Cobalt acetate precursor used (with iron acetate) for FeCo catalyst deposition.
Cobalt Hexadecanethiolate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CobaltHexadecanethiolate- Type
- Class, Matter
- altLabel
- Co hexadecane thiolate
Cobalt thiolate precursor (molecular ink)
Cobalt II Nitrate Hexahydrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CobaltIINitrateHexahydrate- Type
- Class, Matter
A material entity corresponding to a cobalt II nitrate hexahydrate and used as an input in Catalyst Ink Preparation.
Cobalt II Oxide Co O
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CobaltIIOxideCoO- Type
- Class, Matter
- altLabel
- CoO; cobalt(II) oxide
Cobalt(II) oxide (CoO) used as PLD target component with Fe2O3.
Cobalt Nitrate Hexahydrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CobaltNitrateHexahydrate- Type
- Class, Matter
Cobalt(II) nitrate hexahydrate, Co(NO₃)₂·6H₂O, a hydrated cobalt salt used as a chemical precursor.
Cobalt Oxide Co 3 O 4
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CobaltOxideCo3O4- Type
- Class, Matter
- altLabel
- Co3O4; cobalt oxide
Cobalt oxide (Co3O4) used as non-Pt ORR catalyst blended into conductive ink (CICo).
Cobalt Thiolate Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CobaltThiolateMass- Type
- Class, Characteristic
- altLabel
- Co-HDT mass
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of cobalt thiolate.
Cobalt Weight Percent In Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CobaltWeightPercentInCatalystLayer- Type
- Class, Characteristic
- altLabel
- Co
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting eDS-reported normalized cobalt concentration in Pt–Co catalyst layer (wt.%).
COD Removal Efficiency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CODRemovalEfficiency- Type
- Class, Characteristic
- altLabel
- MFC-CICo; MFC-CIFe; MFC-Pt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percentage | http://qudt.org/vocab/unit/PERCENT
A property denoting wastewater treatment performance metric: percent COD removed between influent and effluent.
Coefficient Of Determination R 2
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoefficientOfDeterminationR2- Type
- Class, Characteristic
- altLabel
- R2; coefficient of determination
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A property denoting prediction performance metric: coefficient of determination (R²).
Coffee Ring Effect
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoffeeRingEffect- Type
- Class, Characteristic
- altLabel
- coffee-ring strain
A property denoting non-uniform ring-like deposition pattern after droplet evaporation; suppressed by co-solvent and viscosity control.
Cold Isostatic Pressing Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ColdIsostaticPressingProcess- Type
- Class, Manufacturing
- altLabel
- CIP; cold isostatic press
A material-processing operation that compacts a powder or green body by approximately uniform pressure transmitted through a surrounding fluid without the elevated-temperature conditions of hot isostatic pressing.
Cold Start Failure Voltage Threshold
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ColdStartFailureVoltageThreshold- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
An electrochemical characteristic specifying cold start failure voltage threshold under the conditions and reference basis stated with the record.
Cold Start Survival Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ColdStartSurvivalTime- Type
- Class, Characteristic
- altLabel
- start-up time; survival time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A property denoting duration until cold-start failure (voltage < 0.1 V) at sub-zero temperature.
Cold Start Test
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ColdStartTest- Type
- Class, Measurement
- altLabel
- cold start process; isothermal cold start
Sub-zero start-up test procedure with voltage-time response under constant current density.
Colloidal Method Ink Preparation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ColloidalMethodInkPreparation- Type
- Class, Manufacturing
- altLabel
- colloidal method; ink preparation; slurry preparation
Ink method where PBI forms colloid/precipitate when dripped into acetone and ultrasonicated; compared against solution method.
Colloidal Silica
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ColloidalSilica- Type
- Class, Matter
- altLabel
- silica sol
Silica sol used for impregnation to strengthen porous ceramics.
Colloidal Silica Impregnated Porous Ceramic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ColloidalSilicaImpregnatedPorousCeramic- Type
- Class, Compatibility
- altLabel
- impregnated porous ceramic
Porous ceramic specimen after colloidal silica impregnation and second sintering.
Colloidal Silica Impregnation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ColloidalSilicaImpregnation- Type
- Class, Manufacturing
- altLabel
- immersion in colloidal silica; impregnation treatment
Vacuum-assisted immersion/impregnation of parts with colloidal silica binder (followed by second sintering).
Colloidal Synthesis Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ColloidalSynthesisProcess- Type
- Class, Manufacturing
- altLabel
- colloidal synthesis
Colloidal synthesis of Cu2WS4 nanocubes using metal chlorides + sulfur in oleylamine; heated 180°C then 300°C.
Color Difference Delta Eab
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ColorDifferenceDeltaEab- Type
- Class, Characteristic
- altLabel
- color difference; ΔE; ΔEab*
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting color difference delta eab and determined in Xrite Optical Property Measurement.
Component Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ComponentMass- Type
- Class, Characteristic
- altLabel
- Pt/C mass; ingredient mass; mass (g)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of component.
Component Molar Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ComponentMolarRatio- Type
- Class, Characteristic
- altLabel
- Co:Ni molar ratio; molar ratio; ratio 1.13:1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A dimensionless characteristic expressing the stated ratio identified as Component Molar Ratio.
Mappings
- skos:narrowMatch
http://purl.allotrope.org/ontologies/result#AFR_0002368 (analyte molar ratio)
Component Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ComponentVolume- Type
- Class, Characteristic
- altLabel
- Nafion solution volume; dispersion medium volume; solvent volume
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by component.
Component Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ComponentWeightPercent- Type
- Class, Characteristic
- altLabel
- weight percent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A composition characteristic expressing the mass percentage assigned to component on the stated reference basis.
Composite material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CompositeMaterial- Type
- Class, Matter
A material entity composed of distinguishable constituent materials whose combination provides the material's functional structure or behavior.
Composition characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CompositionCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing the amount, fraction, ratio, concentration, or loading of a constituent.
- subclasses
- Acid Mass Uptake Ratio, Activated Sludge Volume Percent, Al Content Wt, Alcohol Mass Fraction In Solvent Mixture, Alcohol Mole Fraction In Solvent Mixture, Aluminum Nitrate Molar Concentration, Aluminum Nitrate Solution Volume Fraction, Ammonium Carbonate Solution Concentration, Anion To Cation Molar Ratio, Anode Catalyst Loading, Anode Gas Composition, Anode MPL Carbon Support Loading, Astrocyte Percentage, Backbone Attachment Molar Percent, Ball To Powder Ratio, Bath Solute Mass Concentration, Bath Solute Volume Concentration, Binder Mass Fraction, C 1 s Atomic Percent, C 1 s Peak Fraction C O, C 1 s Peak Fraction CC CH, C 1 s Peak Fraction Ceq O, C 1 s Peak Fraction O Ceq O, Carbon Black Volume Fraction, Carbon Mass Fraction In Ink, Carbon Monoxide Volume Percent, Carbon Nitrogen Defect Fraction Percent, Carbon Oxide Fraction Percent, Carbon To Oxygen Atom Ratio, Carbon To Surfactant Weight Ratio, Catalyst Loading, Catalyst Mass Fraction In Ink, Catalyst Mass Fraction In Ink Solids, Catalyst Platinum Mass Fraction, Catalyst Ruthenium Mass Fraction, Catalyst To Binder Mass Ratio, Catalyst To Nafion Solution Mass Ratio, Catalyst To Nafion Weight Ratio, Catalyst Weight Percent In Oil, Cathode Catalyst Loading, Cathode Gas Composition, Cathode MPL Carbon Support Loading, Co 2 Co 3 Ratio, Co 2 p Atomic Percent, Co To N Ratio, Cobalt Weight Percent In Catalyst Layer, Component Molar Ratio, Component Weight Percent, Cyclohexanol Mass Fraction In Ink, Electrical Percolation Threshold Volume Fraction, Electrolyte Concentration, Ethanol Mass Fraction In Ink, Ethanol To Water Volume Ratio, Ethanol Volume Fraction In Solvent Mixture, Ethylene Glycol Volume Fraction, F 1 s Atomic Percent, Fe To Co Molar Ratio, Ferritin Analyte Concentration, Ferritin Mass Concentration, Ferritin Template Concentration, Fiber Ionomer To Carbon Ratio, Filler Weight Percent, Fluorine Weight Percent In Catalyst Layer, Gas Composition, Glucose Concentration, Graphene Few Layer Fraction, Graphene Monolayer Fraction, Graphene Oxide To Lignin Mass Ratio, Graphitic Nitrogen Fraction Percent, H 2 O Al 2 O 3 Molar Ratio, Hydrazine Concentration, Hydrochloric Acid Concentration, Initial Membrane Water Content Lambda, Initiator Concentration, Ionic Strength, Ionomer Adsorption Ratio, Ionomer Dispersion Mass Fraction, Ionomer Mass Fraction, Ionomer To Catalyst Mass Ratio, Ionomer Volume Fraction, Ionomer Weight Percent In Catalyst Layer, Ionomer-to-carbon ratio, Isopropanol Mass Fraction In Ink, Isopropanol To Water Volume Ratio, Isopropanol Volume Fraction In Solvent Mixture, K 2 O Al 2 O 3 Molar Ratio, KOH Concentration, Li Cl To BI Molar Ratio, Li Cl To PBI Weight Ratio, Ligand Density Weight Percent, Linoleic Acid Mass Fraction, Linolenic Acid Mass Fraction, Mass Loss Fraction, Maximum Particle Volume Fraction, Metal Atomic Percent, Metal Coordinated Nitrogen Fraction Percent, Metal Nx Fraction Percent, Metal Oxide Fraction Percent, Metallic Metal Fraction Percent, Methanol Concentration, Methanol Volume Per Oil Volume, Mg Content Wt, Molar Concentration, Monomer Concentration, N 1 s Atomic Percent, N Propanol Mass Fraction In Ink, Na 2 O Al 2 O 3 Molar Ratio, Nafion Fiber Loading, Nafion Solution Mass Fraction In Ink, Nafion To Pt Mass Ratio, Nanoparticle Mass Concentration, Ni 3 Ni 2 Ratio, Ni Content Wt, Ni Fraction In Ni Plus Mg, Ni Plus Mg To Al Molar Ratio, Ni To P Atomic Ratio, O 1 s Atomic Percent, Oleic Acid Mass Fraction, Organic Solvent To Water Volume Ratio, Oxidative Stability Residual Weight Percent, Oxygen Atomic Percent, Oxygen Concentration, Oxygen Volume Fraction, Oxygen Volume Percent, PAG 169 Weight Percent In Ink, Palladium Mass Fraction In Ink, Palmitic Acid Mass Fraction, Particle Volume Concentration, Particle Volume Fraction, PDMS Base To Catalyst Weight Ratio, PEG Weight Percent, Phosphoric Acid Loading, Phosphoric Acid Weight Percent, Platinum Weight Percent In Catalyst, Platinum Weight Percent In Catalyst Layer, Platinum-to-carbon mass ratio, Poly Acrylic Acid Mass Fraction In Ink, Polymer Solution Concentration, POSS Content Relative To Ionomer, Potassium Content Weight Percent, Precursor Concentration, Propylene Glycol Methyl Ether Volume Fraction, Pt Atomic Percent, Pt C To PBI Weight Ratio, Pt Loading, Pt Mass Fraction In Catalyst, Pt On Carbon Catalyst Mass Fraction In Ink, Pt On Carbon Weight Percent, Pt Ru On Carbon Weight Percent, Pt To Ru Atomic Ratio, PTFE Loading Fraction Of Solids, Pyridinic Nitrogen Fraction Percent, Pyrrolic Nitrogen Fraction Percent, QD Ink Solvent Weight Ratio, Quantum Dot Weight Percent In Ink, Reference Concentration, Residual Chloride Content, Residual Iron Content, Rheological Percolation Threshold Volume Fraction, Ricinoleic Acid Mass Fraction, Ru Atomic Percent, Saturated Ionomer Water Content Lambda, Si O 2 Al 2 O 3 Molar Ratio, Silicon Dioxide Weight Percent In Catalyst, Sodium Content Weight Percent, Solid Loading Volume Fraction, Solvent Mass Ratio, Solvent To Carbon Ratio, Solvent To Water Volume Ratio, Stearic Acid Mass Fraction, SU 8 Weight Percent In Ink, Sulfur Atomic Percent, Sulfur Weight Percent In Catalyst Layer, Sulfuric Acid Mass Fraction, Surface Concentration, Surfactant Solution Concentration, Total Ionomer To Carbon Ratio, Total Pt Loading, Triiodide Concentration, Water Mass Fraction In Solvent Mixture, Water To Isopropanol Molar Ratio, Water To Isopropanol Volume Ratio, Water To N Propanol Volume Ratio, Water To N Propanol Weight Ratio, Wetting Solvent To Water Volume Ratio
Composition measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CompositionMeasurement- Type
- Class, Measurement
A characterization measurement that determines the chemical or material composition of a specimen.
Compression Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CompressionPercent- Type
- Class, Characteristic
- altLabel
- compressive strain
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A composition characteristic expressing the stated fractional composition identified as Compression Percent.
Compression Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CompressionPressure- Type
- Class, Characteristic
- altLabel
- bolt compression; clamping pressure; contact pressure
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure | http://qudt.org/vocab/unit/BAR
A pressure characteristic specifying the pressure associated with compression.
Compressive Strength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CompressiveStrength- Type
- Class, Characteristic
- altLabel
- strength (MPa); strength at break
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A property denoting maximum compressive strength of lattice under uniaxial compression.
Compressive Strength Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CompressiveStrengthMeasurement- Type
- Class, Measurement
- altLabel
- compressive strength test; compressive stress-strain
Mechanical testing under compression to determine compressive strength of printed lattices.
Comsol Multiphysics
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ComsolMultiphysics- Type
- Class, SoftwareArtifact
A scientific software platform for defining and numerically solving single-physics or coupled multiphysics models and evaluating the resulting fields and system responses.
Concentration Exponent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ConcentrationExponent- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A composition characteristic that represents concentration exponent for a material, component, process, measurement, or hydrogen-electrochemical system.
Conditioning process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ConditioningProcess- Type
- Class, Process
A process that establishes or changes environmental or operational state before, during, or after an electrochemical experiment.
Conditioning Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ConditioningTime- Type
- Class, Characteristic
- altLabel
- conditioned for; conditioning period; hydration time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with conditioning.
Conditioning Voltage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ConditioningVoltage- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
An electrical characteristic specifying the electric potential difference associated with conditioning.
Conductive Carbon Grease
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ConductiveCarbonGrease- Type
- Class, Matter
- altLabel
- Carbon Conductive Grease 846; carbon grease
A material entity corresponding to a conductive carbon grease and used as an input in Rheology Measurement and Selective Coaxial Ink 3 D Printing.
Conductive Silver Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ConductiveSilverInk- Type
- Class, Matter
Silver nanoparticle ink used for conductive traces; thermally cured/sintered.
Conductivity Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ConductivityDataset- Type
- Class, Data
- altLabel
- conductivity data; conductivity vs RH data; resistance data
Dataset of thin-film conductivity vs RH, thickness, and dopant concentration.
Confocal Microscope
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ConfocalMicroscope- Type
- Class, Instrument
- altLabel
- Olympus Fluoview 1000 confocal microscope
Confocal microscope used for immunofluorescence imaging to quantify astrocyte coverage and cell morphology on substrates.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001125 (confocal microscope) - skos:exactMatch
http://purl.obolibrary.org/obo/OBI_0001079 (confocal microscope)
Constrictivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Constrictivity- Type
- Class, Characteristic
- altLabel
- bottleneck constrictivity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
Dimensionless descriptor of the restriction imposed by variations in pore cross-section, particularly constrictions connecting larger pore bodies, evaluated using a declared pore-network or transport model.
Contact Angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ContactAngle- Type
- Class, Characteristic
- altLabel
- droplet contact angle; initial contact angle; water contact angle
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle
A property denoting static water contact angle on CCM surface; used as hydrophobicity indicator.
Contact Angle Decrease 0 to 200 s
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ContactAngleDecrease_0to200s- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AngleDifference
A property denoting contact angle decrease 0 to 200 s.
Contact Angle Goniometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ContactAngleGoniometer- Type
- Class, Instrument
- altLabel
- sessile drop goniometer
An instrument corresponding to a contact angle goniometer and used in Solvent Property Measurement and Contact Angle Measurement.
Contact Angle Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ContactAngleMeasurement- Type
- Class, Measurement
- altLabel
- contact angle; contact angle test; water drop contact angle measurement
Sessile drop contact angle measurement on CCM surface.
Contact Spring Coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ContactSpringCoefficient- Type
- Class, Compatibility
- altLabel
- contact spring coeff cient; contact spring constant
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SpringConstant
A quantitative characteristic that represents contact spring coefficient for a material, component, process, measurement, or hydrogen-electrochemical system.
Contact-angle cosine axis data
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ContactAngleCosineAxisData- Type
- Class, Data
- altLabel
- contact angles for CAD
- notation
- cos(theta)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for Contact-angle cosine axis data; the curated source reports [-].
Array of contact-angle cosine values used as the angular axis for evaluating the cathode-catalyst-layer contact-angle distribution.
Contamination Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ContaminationTime- Type
- Class, Characteristic
- altLabel
- CO exposure time; contaminated for
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with contamination.
Continuous Mode Printing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ContinuousModePrinting- Type
- Class, Manufacturing
- altLabel
- continuous mode
Conventional DIW printing mode where geometry is sliced into layers and filled with continuous filaments.
Contrast Variation SANSUSANS Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ContrastVariationSANSUSANSMeasurement- Type
- Class, Measurement
- altLabel
- SANS; USANS; contrast-variation neutron scattering
Combined contrast-variation small-angle and ultrasmall-angle neutron scattering (SANS+USANS) used to quantify hierarchical ink structure.
Convection Drying
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ConvectionDrying- Type
- Class, Manufacturing
- altLabel
- annealed in convection oven; convection dryer; dried in convection dryer
Drying step in convection dryer after printing.
Cooling Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoolingRate- Type
- Class, Characteristic
- altLabel
- cool-down rate; fast-cooled; slow-cooled
- QUDT guidance
- http://qudt.org/vocab/quantitykind/TemperatureRate
A quantitative characteristic specifying the change in cooling per stated unit of time or progression variable.
Copper Film
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CopperFilm- Type
- Class, Matter
- altLabel
- Cu film; copper pattern
Electrolessly deposited copper metallization layer/pattern formed on PET after Pd activation.
Copper Sulfate Pentahydrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CopperSulfatePentahydrate- Type
- Class, Matter
Copper(II) sulfate pentahydrate; copper source in electroless plating bath (Solution A).
Coprecipitation Synthesis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoprecipitationSynthesis- Type
- Class, Manufacturing
Synthesis of LDH precursors by coprecipitation from metal nitrate solutions into Na2CO3 at controlled pH.
Core Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoreDiameter- Type
- Class, Characteristic
- altLabel
- conductive core diameter; core width
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of core.
Corn Starch
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CornStarch- Type
- Class, Matter
Corn starch used as binder/ingredient in conductive ink formulation.
Coulombic Efficiency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoulombicEfficiency- Type
- Class, Characteristic
- altLabel
- CE; Coulombic efficiency (average); MFC-CICo
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Efficiency | http://qudt.org/vocab/unit/PERCENT
A property denoting coulombic efficiency of full ORFB cell during galvanostatic cycling (discharge capacity / charge capacity).
Count characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CountCharacteristic- Type
- Class, Characteristic
A dimensionless quantitative characteristic expressing the number of discrete entities, events, cycles, projections, or repetitions.
- subclasses
- Acid Etching Repetitions, Average Water Droplet Count, Bending Cycle Count, Carbon Nanotube Wall Count, Coating Repetitions, CV Cycle Count, Delay Layer Count, Electron Transfer Number, Freeze Thaw Cycle Count, Hidden Neuron Number, Hydration Number Lambda, Impregnation Cycles, Number Of Cells, Number Of Cycles, Number Of Spray Passes, Printed Layer Count, Projection Number, Purification Repetitions, Segment Count, Shear Mixing Repetitions, Simulation Particle Count, Simulation Time Step Count, Slice Number, Sliding Window Size, Spray Coating Pass Count
Coverage Equation RIC Max
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoverageEquationRICMax- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A surface characteristic that represents coverage equation ric max for a material, component, process, measurement, or hydrogen-electrochemical system.
Coverage Equation RIC Min
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoverageEquationRICMin- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A surface characteristic that represents coverage equation ric min for a material, component, process, measurement, or hydrogen-electrochemical system.
Coverage Relaxation Rate Constant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CoverageRelaxationRateConstant- Type
- Class, Characteristic
- altLabel
- inverse of coverage relaxation time; tau^-1; τ−1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A property denoting inverse coverage relaxation time (τ−1 = R0/L), interpreted as first-order rate constant for oxidative desorption of intermediates.
CPE Admittance Y 0
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CPEAdmittanceY0- Type
- Class, Characteristic
- altLabel
- CPE1; Y0; Yo
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AdmittancePerArea
The frequency-independent coefficient multiplying the nth power of imaginary angular frequency in the admittance of a specified constant-phase element, where n is the element's dimensionless exponent.
CPE Exponent N
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CPEExponentN- Type
- Class, Characteristic
- altLabel
- CPE exponent; n (CPE exponent)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting CPE exponent N and determined in Electrochemical Impedance Spectroscopy Potentiostatic and Electrochemical Impedance Spectroscopy Galvanostatic.
Crack Aspect Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackAspectRatio- Type
- Class, Compatibility
- altLabel
- aspect ratio of cracks
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AspectRatio
A property denoting crack aspect ratio and determined in Crack Characterization Measurement.
Crack Characterization Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackCharacterizationMeasurement- Type
- Class, Measurement
- altLabel
- crack characterization
A measurement process that uses crack characterization measurement to determine Crack Density and Crack Aspect Ratio using SEM Instrument.
Crack Connectivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackConnectivity- Type
- Class, Characteristic
- altLabel
- fully penetrating cracks
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
Fraction of detected catalyst-layer cracks that span the complete layer thickness from one bounding interface to the other, calculated as the number of spanning cracks divided by the total number of detected cracks.
Crack Connectivity Analysis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackConnectivityAnalysis- Type
- Class, Process
- altLabel
- cluster connectivity analysis
An image or microstructure analysis that identifies connected crack pathways and quantifies a specified connectivity descriptor, such as the fraction of cracks spanning a layer thickness.
Crack Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackDensity- Type
- Class, Compatibility
- altLabel
- areal density of cracks; crack areal density; surface crack density
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting crack density and determined in Crack Characterization Measurement.
Crack Length
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackLength- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting characteristic crack length scale observed in SEM images.
Crack Volume Accessibility At 20 um
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackVolumeAccessibilityAt20um- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A geometric characteristic that represents crack volume accessibility at 20 um for a material, component, process, measurement, or hydrogen-electrochemical system.
Crack Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackWidth- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting characteristic crack width scale observed in SEM images.
Crack Width D 50 CWD
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackWidthD50_CWD- Type
- Class, Characteristic
- altLabel
- d50(CWD); mean crack width (Table 1); median crack width
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
Median of the crack-width distribution obtained by the declared crack-width-distribution image-analysis method, that is, the width at cumulative distribution fraction 0.5.
Crack Width D 50 MIP
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackWidthD50_MIP- Type
- Class, Characteristic
- altLabel
- d50(MIP); median accessible crack width
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
Median equivalent crack-entry size in the cumulative distribution generated by the declared simulated mercury-intrusion analysis, corresponding to cumulative fraction 0.5.
Crack Width Max
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrackWidthMax- Type
- Class, Characteristic
- altLabel
- cracks width up to; maximum crack width
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying crack width max under the conditions and reference basis stated with the record.
Crawler Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrawlerSpeed- Type
- Class, Characteristic
- altLabel
- crawl speed; mm/min
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LinearSpeed
A property denoting speed of LCE-based crawler during thermal cycling.
Critical Concentration Of Particles Per Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CriticalConcentrationOfParticlesPerVolume- Type
- Class, Compatibility
- altLabel
- CCPV
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A density characteristic that represents critical concentration of particles per volume for a material, component, process, measurement, or hydrogen-electrochemical system.
Critical Crack Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CriticalCrackThickness- Type
- Class, Characteristic
- altLabel
- CCT
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting largest dried film thickness at which primary cracks (PCs) do not occur during drying.
Critical Crack Thickness Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CriticalCrackThicknessMeasurement- Type
- Class, Measurement
- altLabel
- CCT measurement; critical crack thickness
Determination of maximum film thickness without primary cracks during drying; assessed by confocal microscopy across thickness series.
Critical Dielectric Constant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CriticalDielectricConstant- Type
- Class, Compatibility
- altLabel
- Ecrit; critical electric constant
- QUDT guidance
- http://qudt.org/vocab/quantitykind/RelativePermittivity
A quantitative characteristic that represents critical dielectric constant for a material, component, process, measurement, or hydrogen-electrochemical system.
Crosshead Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrossheadSpeed- Type
- Class, Characteristic
- altLabel
- compressive speed; stretching speed
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Speed
A rate characteristic specifying the speed associated with crosshead.
Crush Strength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrushStrength- Type
- Class, Characteristic
- altLabel
- radial crush strength
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ForcePerLength
A property denoting crush strength and determined in Crush Strength Measurement.
Crush Strength Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CrushStrengthMeasurement- Type
- Class, Measurement
- altLabel
- crush strength testing; radial crush strength
Radial crush strength measurement of cylindrical ceramic specimens.
Cryo Ultramicrotome
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CryoUltramicrotome- Type
- Class, Instrument
- altLabel
- cryo-ultramicrotome (Leica EMFCS)
Prepares neat cross-sections at -140°C for optical imaging.
Cryo Ultramicrotome Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CryoUltramicrotomeTemperature- Type
- Class, Characteristic
- altLabel
- cryo temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with cryo ultramicrotome.
Cryostat
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Cryostat- Type
- Class, Instrument
- altLabel
- Lauda Eco Silver RE1050 cryostat
Cryostat/temperature control unit for fuel cell test station.
Cu 2 WS 4 Counter Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Cu2WS4CounterElectrode- Type
- Class, Matter
Counter electrode film based on Cu2WS4 nanocubes deposited on FTO glass.
Cu 2 WS 4 Nanocube Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Cu2WS4NanocubeInk- Type
- Class, Matter
- altLabel
- CWS nanocube ink; nanocube inks
Dispersion of Cu2WS4 nanocubes (in toluene) used for spin coating onto FTO as counter electrode film.
Cu 2 WS 4 Nanocubes
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Cu2WS4Nanocubes- Type
- Class, Matter
- altLabel
- CWS nanocubes; Cu2WS4
Nanocubes composed of the ternary copper–tungsten sulfide Cu₂WS₄.
Curing Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CuringTime- Type
- Class, Characteristic
- altLabel
- cure time; cured within; photocure time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with curing.
Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CurrentDensity- Type
- Class, Characteristic
- altLabel
- cell current density; current flux density; j0
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity | http://qudt.org/vocab/unit/MilliA-PER-CentiM2
http://qudt.org/vocab/quantitykind/ElectricCurrentDensity
A property denoting current density normalized to Geometric Area and determined in MEAPolarization, Rotating Ring Disk Voltammetry, and Cyclic Voltammetry.
Mappings
- skos:exactMatch
http://www.ontology-of-units-of-measure.org/resource/om-2/CurrentDensity (current density)
Current Density Decay Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CurrentDensityDecayRate- Type
- Class, Characteristic
- altLabel
- current decay rate; decay rate; degradation rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensityRate
A property denoting rate of current density loss during constant-voltage durability test.
Current Density Loss Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CurrentDensityLossPercent- Type
- Class, Characteristic
- altLabel
- current loss %
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio | http://qudt.org/vocab/unit/PERCENT
A property denoting percent loss from Tafel-step analysis attributed to connectivity/specific adsorption effects.
Current Density Per Pt Surface Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CurrentDensityPerPtSurfaceArea- Type
- Class, Characteristic
- altLabel
- A·m_Pt^-2; current density per catalytic surface
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity
A property denoting current density normalized by Pt catalytic surface area (simulation output, A m_Pt^-2).
Current Efficiency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CurrentEfficiency- Type
- Class, Characteristic
- altLabel
- cd/A; maximum current efficiency 0.85 cd/A
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LuminousIntensityPerCurrent
A property denoting lED current efficiency metric reported for QD-based color conversion device.
Current Retention Percent After Chronoamperometry
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CurrentRetentionPercentAfterChronoamperometry- Type
- Class, Characteristic
- altLabel
- current retention
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting percent of initial ORR current retained after constant-potential chronoamperometry durability test.
Current-collector component
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CurrentCollectorComponent- Type
- Class, Matter
An electrochemical component that conducts electronic current between an electrode and an external circuit or adjoining device part.
Current-Interrupt HFR Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CurrentInterruptHFRMeasurement- Type
- Class, Measurement
- altLabel
- HFR measurement; current interrupt; high frequency resistance (HFR) measurement
A current-interrupt high-frequency-resistance measurement performed under defined gas-side, thermal, humidity, pressure, and operating-current conditions to determine ohmic response of the fuel-cell system.
Curve dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CurveDataset- Type
- Class, Data
A dataset representing one dependent variable as a function of one or more independent variables.
Cut Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CutThickness- Type
- Class, Characteristic
- altLabel
- milling thickness; slice thickness
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the distance between the opposing bounding surfaces of cut.
Cutting or machining process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MachiningProcess- Type
- Class, Manufacturing
A material-processing operation that changes geometry by cutting, milling, polishing, grinding, sectioning, or related removal of matter.
CV Cycle Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CVCycleCount- Type
- Class, Characteristic
- altLabel
- CV cycles
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying the number of cv cycle.
CV Potential Window
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CVPotentialWindow- Type
- Class, Characteristic
- altLabel
- CV potential range; potential window
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
An electrochemical characteristic specifying cv potential window under the conditions and reference basis stated with the record.
CV Scan Rate Cleaning
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CVScanRateCleaning- Type
- Class, Characteristic
- altLabel
- conditioning scan rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VoltagePerTime
A quantitative characteristic specifying cv scan rate cleaning under the conditions and reference basis stated with the record.
CV Scan Rate Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CVScanRateMeasurement- Type
- Class, Characteristic
- altLabel
- CV scan rate; scan rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VoltagePerTime
A quantitative characteristic specifying cv scan rate measurement under the conditions and reference basis stated with the record.
Cyclic Bending Test Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CyclicBendingTestMeasurement- Type
- Class, Measurement
- altLabel
- bending durability test; cyclic bending test
Mechanical cycling test where Cu patterns on PET are bent repeatedly and normalized resistance is tracked.
Cyclic Voltammetry
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CyclicVoltammetry- Type
- Class, Measurement
- altLabel
- CV; cyclic voltammogram; cyclic voltammograms
A measurement process that uses cyclic voltammetry under defined electrochemical, thermal, humidity, pressure, and gas-side operating conditions to generate raw voltammogram data and derive electrochemical response properties.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0000025 (cyclic voltammetry) - skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000082 (cyclic voltammetry)
Cyclic Voltammogram Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CyclicVoltammogramDataset- Type
- Class, Data
- altLabel
- cyclic voltammogram; cyclic voltammograms; voltammogram data
A dataset containing cyclic voltammogram data generated by Cyclic Voltammetry.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0000794 (cyclic voltammogram)
Cyclohexanol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Cyclohexanol- Type
- Class, Matter
Cyclohexanol (C₆H₁₂O), a saturated cyclic alcohol with a six-membered carbon ring.
Cyclohexanol Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#CyclohexanolMassFractionInInk- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Cyclohexanol Mass Fraction In Ink.
Cyclopentanone
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Cyclopentanone- Type
- Class, Matter
Co-solvent used to suppress coffee-ring deformation and aggregation in QD inks.
Data
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Data- Type
- Class, Data
An information entity that records observations, values, representations, or computational results.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/T4FS_0000430 (data)
Data Acquisition Computer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DataAcquisitionComputer- Type
- Class, Instrument
- altLabel
- supervising computer
Computer/data acquisition system used to store measured aging data.
Data point
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DataPoint- Type
- Class, DataPoint
Data that records one result, observation, or value and its semantic and provenance context.
- subclassOf / subPropertyOf
- Data
Mappings
- skos:exactMatch
https://saref.etsi.org/saref4ener/DataPoint (Data point)
Data processing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DataProcessing- Type
- Class, Process
An analysis process that transforms data representation, quality, organization, or content without constituting a new physical measurement.
Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Dataset- Type
- Class, Data
Data organized as an identifiable collection for storage, exchange, processing, or analysis.
- subclassOf / subPropertyOf
- Data
- subclasses
- Acid Uptake Dataset, AST Dataset, Break In Dataset, Capillary-pressure axis data, Catalyst Ink Structure Dataset, CCL water-saturation data, Charge Discharge Dataset, Conductivity Dataset, Contact-angle cosine axis data, Curve dataset, Diffraction dataset, DLS Particle Size Dataset, DRM Performance Dataset, DRT Dataset, ECSA Dataset, Electrical Properties Table, Electrochemical dataset, Experiment Dataset, External Quantum Efficiency Dataset, FTIR Dataset, Fuel Cell Aging Dataset, High Speed Video Dataset, Image dataset, Ink-to-Composition Model input dataset, Ink-to-Composition Model scalar-result dataset, Ionomer Dispersion Property Dataset, JV Performance Dataset, Limiting Current Dataset, Local Oxygen Transport Resistance Dataset, OER Performance Dataset, ORR Performance Dataset, Oxygen Concentration Time Series Data, Photodegradation Dataset, Pore-radius axis data, Porous Ceramic Property Dataset, Rheology Dataset, Simulation dataset, Solvent Physical Property Dataset, Spectrum dataset, Surface Topography Dataset, Swelling Dataset, Tabular dataset, Thermal Analysis Dataset
Dealloyed Pt Ni On Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DealloyedPtNiOnCarbonCatalyst- Type
- Class, Matter
- altLabel
- d-PtNi
A supported metal catalyst representing dealloyed pt ni on carbon catalyst under the conditions and reference basis stated with the record.
Debinding Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DebindingProcess- Type
- Class, Manufacturing
Thermal removal/decomposition of polymer binder and organics prior to sintering.
Debye Length
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DebyeLength- Type
- Class, Characteristic
- altLabel
- κ^-1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the length of debye.
Decal Transfer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DecalTransfer- Type
- Class, Manufacturing
- altLabel
- decal transfer method; transfer through hot press; transfer via hot-pressing
Manufacturing step that transfers a preformed catalyst-layer decal from a temporary substrate onto a membrane to form a catalyst-coated membrane.
Decal Transfer Evaluation Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DecalTransferEvaluationMeasurement- Type
- Class, Measurement
- altLabel
- Pt loading measured by weighing
Measurement workflow calculating Pt loading and catalyst transfer yield from decal film mass change during release.
Deflection Criterion Calculation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DeflectionCriterionCalculation- Type
- Class, Process
- altLabel
- Eq. (1)-(3) calculation
An analysis that estimates printed-filament deflection and the mechanical modulus needed to satisfy a stated deflection limit using an explicitly defined beam or filament model.
Deflection Percent Of Filament Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DeflectionPercentOfFilamentDiameter- Type
- Class, Characteristic
- altLabel
- % filament diameter; % of the filament diameter; deflection percent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting deflection expressed as percent of filament diameter.
Mappings
- skos:broadMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/dia_xxx_xxx-bb6404c75508494a93ef3ae2ad7f72ff-vp (Diameter)
Degradation characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DegradationCharacteristic- Type
- Class, Characteristic
A performance property describing deterioration, loss, rate of change, durability, or lifetime.
Degradation Prediction Evaluation Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DegradationPredictionEvaluationMeasurement- Type
- Class, Process
- altLabel
- degradation prediction; prediction performance evaluation
An analysis that compares degradation-model predictions with measured aging data using stated prediction-error or validation measures.
Degree Of Sulfonation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DegreeOfSulfonation- Type
- Class, Compatibility
- altLabel
- DS
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A quantitative characteristic that represents degree of sulfonation for a material, component, process, measurement, or hydrogen-electrochemical system.
Delay Layer Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DelayLayerCount- Type
- Class, Characteristic
- altLabel
- delay layer; delay layer is 2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying the number of delay layer.
Delta S
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DeltaS- Type
- Class, Compatibility
- altLabel
- ΔS; ΔS (A*); ΔS (B*)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting delta S and determined in Xrite Optical Property Measurement.
DEM Time Step
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DEMTimeStep- Type
- Class, Characteristic
- altLabel
- time step; Δt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying dem time step under the conditions and reference basis stated with the record.
Mappings
- skos:broadMatch
https://openenergyplatform.org/ontology/oeo/OEO_00030033 (time step)
Density characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DensityCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing mass, number, or another extensive quantity per unit volume or area.
- subclasses
- Ag NW Surface Density, Bulk Density, Carbon density, CO Stripping Specific Charge Density, Current Density Loss Percent, Current Density Per Pt Surface Area, Dispersion Medium Density, Double Layer Capacitive Current Density, Dry ionomer density, Exchange Current Density, H 2 Desorption Peak Integral Current Density, Hydrogen Crossover Current Density, Hydrogen Monolayer Charge Density On Pt, Limiting Current Density, Limiting Current Density Loss Percent, Limiting Current Density Loss Percent After ADT, Maximum Current Density, Particle Density, Platinum density, Reference Current Density, Relative Current Density Change, Relative Density, Set Current Density, Short Circuit Current Density
Density Functional Theory Calculation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DensityFunctionalTheoryCalculation- Type
- Class, Process
- altLabel
- DFT; density functional theory
A computational electronic-structure analysis that uses an electron-density functional to calculate energies or other properties of a specified atomic system.
Density Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DensityMeasurement- Type
- Class, Measurement
- altLabel
- Density
Generic density measurement for ink/mixture (method not specified in this source).
Deposition Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DepositionPotential- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
An electrical characteristic specifying the electric or electrochemical potential associated with deposition.
Deposition Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DepositionRate- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumetricFlowRate
Volume of ink deposited onto or into the target structure per unit time during the specified printing process.
Deposition Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DepositionTime- Type
- Class, Characteristic
- altLabel
- plating time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with deposition.
Designed Porosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DesignedPorosity- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
A morphological characteristic describing designed porosity under the conditions and reference basis stated with the record.
Detection Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DetectionArea- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
A geometric characteristic specifying the area associated with detection.
Mappings
- skos:broadMatch
http://emmo.info/emmo#EMMO_96f39f77_44dc_491b_8fa7_30d887fe0890 (Area) - skos:broadMatch
http://semanticscience.org/resource/SIO_000045 (area) - skos:broadMatch
https://saref.etsi.org/saref4inma/Area (Area)
Detection Limit
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DetectionLimit- Type
- Class, Characteristic
- altLabel
- lowest detectable concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarConcentration
A property denoting detection limit.
Development Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DevelopmentTime- Type
- Class, Characteristic
- altLabel
- developed ... for a minute
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with development.
Device
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Device- Type
- Class, Matter
An engineered object designed to perform a defined technical operation.
Diacetone Alcohol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DiacetoneAlcohol- Type
- Class, Matter
Diacetone alcohol, or 4-hydroxy-4-methylpentan-2-one, an organic hydroxyketone used as a solvent.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_55381 (diacetone alcohol)
Dialysis Bath Change Interval
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DialysisBathChangeInterval- Type
- Class, Characteristic
- altLabel
- bath change interval
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying dialysis bath change interval under the conditions and reference basis stated with the record.
Dialysis Purification Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DialysisPurificationProcess- Type
- Class, Manufacturing
- altLabel
- dialysis purification
Purification step to remove unreacted monomers by dialysis against DI water.
Dialysis Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DialysisTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with dialysis.
Diaphragm Pump
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DiaphragmPump- Type
- Class, Instrument
An instrument corresponding to a diaphragm pump and used in Organic Flow Battery Polarization Measurement.
Dibutyl Phthalate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DibutylPhthalate- Type
- Class, Matter
Plasticizer used in ink formulation.
Dielectric Constant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DielectricConstant- Type
- Class, Characteristic
- altLabel
- electric constant; solvent dielectric constant
- QUDT guidance
- http://qudt.org/vocab/quantitykind/RelativePermittivity
http://qudt.org/vocab/quantitykind/RelativePermittivity
A property denoting solvent dielectric constant (relative permittivity), affects ionomer solvation and dispersion.
Differential Scanning Calorimeter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DifferentialScanningCalorimeter- Type
- Class, Instrument
- altLabel
- DSC
Differential scanning calorimeter instrument used to collect DSC curves during heating (TA Q2000).
Differential scanning calorimetry
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DifferentialScanningCalorimetryMeasurement- Type
- Class, Measurement
- altLabel
- DSC; Differential Scanning Calorimetry Measurement; differential scanning calorimetry
A measurement process used to determine thermal event peak temperature and phase transition temperature by differential scanning calorimetry, typically using a differential scanning calorimeter, DSC instrument, or synchronous thermal analyzer, and generating a thermal analysis dataset.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/process#AFP_0002124 (differential scanning calorimetry) - skos:exactMatch
https://w3id.org/emmo/domain/characterisation-methodology/chameo#DifferentialScanningCalorimetry (DifferentialScanningCalorimetry) - skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000071 (differential scanning calorimetry) - skos:exactMatch
https://w3id.org/pmd/co/PMD_0000606 (differential scanning calorimetry process)
Diffraction dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DiffractionDataset- Type
- Class, Data
A dataset containing diffraction or scattering intensity as a function of angle, reciprocal-space coordinate, or related variable.
Diffraction instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DiffractionInstrument- Type
- Class, Instrument
A measurement instrument used to record radiation or particle diffraction from a specimen.
Diffraction measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DiffractionMeasurement- Type
- Class, Measurement
A characterization measurement that records the scattering or diffraction of incident radiation to determine structural characteristics.
Diffraction Peak Position 2 Theta
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DiffractionPeakPosition2Theta- Type
- Class, Characteristic
- altLabel
- (002) peak position; diffraction peak at 2θ; diffraction peak position
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle
http://qudt.org/vocab/quantitykind/Angle
A property denoting xRD peak position (2θ) values used to identify phases (e.g., 22.1°, 35.76°, 60.16°, 71.95°).
Digital Balance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DigitalBalance- Type
- Class, Instrument
Balance used for mass measurement for density/porosity calculations.
Digital Caliper
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DigitalCaliper- Type
- Class, Instrument
Caliper used to measure dimensions for bulk density calculation.
Digital Microscope
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DigitalMicroscope- Type
- Class, Instrument
- altLabel
- VHX-5000 digital microscope (Keyence)
Optical/digital microscope used for imaging fracture surfaces and measuring fiber length after dilution.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/OBI_0001126 (digital microscope)
Digital Multimeter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DigitalMultimeter- Type
- Class, Instrument
- altLabel
- Keithley 2000 multimeter; Keithley digital multimeter
Digital multimeter used to measure cell voltage and current.
Dihydroxybenzene Disulfonic Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DihydroxybenzeneDisulfonicAcid- Type
- Class, Matter
Positive (catholyte) quinone electroactive material used in ORFB (BQDSH2/BQDS couple).
Dilution Factor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DilutionFactor- Type
- Class, Characteristic
- altLabel
- serum diluted 100×
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A quantitative characteristic specifying dilution factor under the conditions and reference basis stated with the record.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/result#AFR_0002758 (dilution factor)
Dimensional Expansion Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DimensionalExpansionPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting percent change in linear dimension after processing (e.g., Teflon substrate elongation).
Dimethyl Sulfoxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DimethylSulfoxide- Type
- Class, Matter
Specific solvent used in catalyst ink.
Dimethylacetamide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Dimethylacetamide- Type
- Class, Matter
- altLabel
- N-dimethylacetamide
Ink solvent used for solution method and for PBI stock solution.
Dimethylformamide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Dimethylformamide- Type
- Class, Matter
- altLabel
- N–dimethylformamide
Solvent used to dissolve PES/PVP during membrane fabrication.
Dip Coater Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DipCoaterInstrument- Type
- Class, Instrument
- altLabel
- KSV dip coater; KSV dip-coater LM
An instrument corresponding to a dip coater instrument and used in Dip Coating Process.
Dip Coating Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DipCoatingProcess- Type
- Class, Manufacturing
- altLabel
- dip coating; dip-coated
Dip-coating of carbon cloth in Ni-Co thiolate ink prior to thermolysis
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001471 (dip coating)
Dip Coating Withdrawal Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DipCoatingWithdrawalRate- Type
- Class, Characteristic
- altLabel
- immersion/extraction rate; withdrawal rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Speed
A quantitative characteristic specifying the change in dip coating withdrawal per stated unit of time or progression variable.
Dipropyl Ketone
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DipropylKetone- Type
- Class, Matter
Ink solvent with dielectric constant 12.60 (paper)
Dipropylene Glycol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DipropyleneGlycol- Type
- Class, Matter
Dipropylene glycol (DPG) solvent referenced for PFSA dispersion; affects ionomer aggregate size.
Direct Ink Writing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DirectInkWriting- Type
- Class, Manufacturing
- altLabel
- DIW; direct ink writing (DIW); direct-write additive manufacturing
Additive manufacturing process where a viscoelastic ink is extruded through a nozzle along a programmed toolpath.
Direct Ink Writing 2
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DirectInkWriting2- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Speed
A quantitative characteristic that represents direct ink writing 2 for a material, component, process, measurement, or hydrogen-electrochemical system.
Direct Ink Writing Printer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DirectInkWritingPrinter- Type
- Class, Instrument
- altLabel
- DIW printer; extrusion-based 3D printer; three-axis 3D printer
Motor-driven DIW/robocasting printer with syringe driver for controlled extrusion and retraction.
Direct Membrane Deposition
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DirectMembraneDeposition- Type
- Class, Manufacturing
- altLabel
- DMD
MEA fabrication technique where ionomer dispersion is deposited directly on a gas diffusion electrode to form PEM/CL interface (as described by Klingele et al.).
Direct Methanol Fuel Cell
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DirectMethanolFuelCell- Type
- Class, Matter
- altLabel
- DMFC
A fuel-cell system in which methanol supplied directly to the anode is electrochemically oxidized, usually coupled to oxygen reduction at the cathode, to produce electrical energy.
Discharge Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DischargeTime- Type
- Class, Characteristic
- altLabel
- t_discharge
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A property denoting description=Full discharge time during galvanostatic discharge to 0 V.
Discrete Element Method Packing Simulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DiscreteElementMethodPackingSimulation- Type
- Class, Process
- altLabel
- DEM; DEM simulation; discrete element method
A computational model execution that calculates the motion, positions, and interactions of discrete particles or aggregates to reconstruct a packing or an evolving particulate microstructure.
Dispersant Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DispersantMassFraction- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic that represents dispersant mass fraction for a material, component, process, measurement, or hydrogen-electrochemical system.
Dispersion
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Dispersion- Type
- Class, Matter
A mixture in which particles, droplets, or macromolecular entities are distributed through a continuous phase.
- subclasses
- Catalyst Ink, Ceramic Colloid Ink, Conductive Silver Ink, Cu 2 WS 4 Nanocube Ink, Geopolymer Ink, Gold Nanoparticle Ink, Graphite Ink Suspension, Hydrophilic Catalyst Ink, Hydrophobic Catalyst Ink, Lignin Graphene Oxide Ink, Metal Powder Ink, Microporous Layer Ink, Oxide Powder Ink, PDL Ag NW Composite Ink, Powder Ink, PTFE Suspension 60 wt Percent, Quantum Dot Ink, Silver Nanoparticle Ink ME 603
Mappings
- skos:exactMatch
http://emmo.info/emmo#EMMO_0b15f4ae_092e_4487_9100_3c44176c545c (Dispersion) - skos:exactMatch
http://purl.allotrope.org/ontologies/material#AFM_0001079 (dispersion)
Dispersion Machine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DispersionMachine- Type
- Class, Instrument
Dispersion/stirring machine used during ink preparation.
Dispersion Medium Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DispersionMediumDensity- Type
- Class, Characteristic
- altLabel
- dispersion media density; ρ_m
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Density
A density characteristic specifying the stated amount of dispersion medium per unit reference volume or area.
Dispersion process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DispersionProcess- Type
- Class, Manufacturing
A formulation process that distributes particles, droplets, or macromolecular entities through a continuous phase.
Distribution Of Relaxation Times Analysis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DistributionOfRelaxationTimesAnalysis- Type
- Class, Process
- altLabel
- DRT; distribution of relaxation times
An impedance-data analysis that estimates a distribution of relaxation contributions over a specified relaxation-time or frequency coordinate using an explicitly stated response model and inversion method.
DLP Elastomer Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DLPElastomerResin- Type
- Class, Matter
- altLabel
- DLP elastomer
Acrylate-based elastomer resin printed by DLP (composition specified in paper).
DLP Plastic Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DLPPlasticResin- Type
- Class, Matter
- altLabel
- DLP plastic
Commercial acrylate-thiol photopolymer resin (ToughPoint™) used for DLP printing.
DLP Printing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DLPPrinting- Type
- Class, Manufacturing
- altLabel
- vat photopolymerization-based DLP printing
Top-down digital light processing (DLP) vat photopolymerization used to print photopolymer matrix layers (not found in ontology).
DLP Projector
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DLPProjector- Type
- Class, Matter
- altLabel
- digital projector (Vivitek D912HD) with modified optics
Projector-based exposure system used for DLP vat photopolymerization.
DLP Resin Tank
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DLPResinTank- Type
- Class, Matter
- altLabel
- resin tank
A container or vat that holds photopolymerizable liquid resin in a digital-light-processing vat-photopolymerization printer.
DLS Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DLSInstrument- Type
- Class, Instrument
- altLabel
- DLS; dynamic light scattering instrument; light scattering instrument
Instrument for measuring particle/agglomerate hydrodynamic size distribution in inks/solutions.
DLS Particle Size Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DLSParticleSizeDataset- Type
- Class, Data
A dataset containing DLS particle size data generated by Dynamic Light Scattering Measurement.
DLS polydispersity index
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DLSPolydispersityIndex- Type
- Class, Characteristic
- altLabel
- DLS PDI; dynamic light scattering polydispersity index
A dimensionless characteristic derived from dynamic-light-scattering cumulant analysis that describes the relative breadth of a particle-size distribution.
DLS Scattering Angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DLSScatteringAngle- Type
- Class, Characteristic
- altLabel
- scattering angle
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle
http://qudt.org/vocab/quantitykind/Angle
A geometric characteristic specifying the angle associated with dls scattering.
DMAEMA Monomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DMAEMAMonomer- Type
- Class, Matter
- altLabel
- DMAEMA
Tertiary-amine methacrylate monomer providing pH-responsive segments in the copolymer.
DMSO Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DMSOMassFractionInInk- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic that represents dmso mass fraction in ink for a material, component, process, measurement, or hydrogen-electrochemical system.
Docosyltriethoxysilane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Docosyltriethoxysilane- Type
- Class, Matter
Long-chain silane used to functionalize fabric surface and impart superhydrophobicity; also used as single-component printing ink.
Doctor Blade Coating
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DoctorBladeCoating- Type
- Class, Manufacturing
- altLabel
- bar-coating; doctor blade; knife coating
Coating method using a blade to control wet film thickness during CL deposition.
Double Bond Conversion Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DoubleBondConversionRate- Type
- Class, Characteristic
- altLabel
- C=C conversion rate; double-bond conversion
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting conversion of carbon–carbon double bonds during UV curing, derived from FTIR peak area decrease at 1638 cm−1.
Double Layer Capacitance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DoubleLayerCapacitance- Type
- Class, Characteristic
- altLabel
- Ca; Cdl; Cpd1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Capacitance | http://qudt.org/vocab/unit/FARAD-PER-CentiM2
A property denoting double layer capacitance normalized to Geometric Area and determined in Electrochemical Impedance Spectroscopy Potentiostatic, Electrochemical Impedance Spectroscopy Galvanostatic, and Cyclic Voltammetry.
Double Layer Capacitance Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DoubleLayerCapacitanceRatio- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting double layer capacitance ratio and determined in Cyclic Voltammetry.
Double Layer Capacitive Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DoubleLayerCapacitiveCurrentDensity- Type
- Class, Characteristic
- altLabel
- i_dl
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity
A property denoting capacitive (double-layer) current density at 0.4 V used to compute double-layer capacitance.
DRM Performance Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DRMPerformanceDataset- Type
- Class, Data
- altLabel
- DRM performance
Dataset of DRM catalytic performance (conversions, etc.).
Drop Casting Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DropCastingProcess- Type
- Class, Manufacturing
- altLabel
- drop cast; drop casting; drop-cast method
Process of depositing catalyst ink onto carbon paper GDL.
Drop Spacing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DropSpacing- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying drop spacing under the conditions and reference basis stated with the record.
Droplet Penetration Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DropletPenetrationTime- Type
- Class, Characteristic
- altLabel
- sessile drop penetrates into membrane
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A property denoting droplet penetration time.
Droplet Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DropletVolume- Type
- Class, Characteristic
- altLabel
- drop volume; ink volume; water droplet volume
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by droplet.
DRT Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DRTDataset- Type
- Class, Data
- altLabel
- DRT function G(f); DRT spectra
Dataset containing calculated DRT spectra (e.g., G(f) vs frequency) and derived peak features from impedance spectra.
Dry ionomer density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DryIonomerDensity- Type
- Class, Characteristic
- altLabel
- ionomer density (dry)
- notation
- rhoion
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassDensity | http://qudt.org/vocab/unit/GM-PER-M3 | Value-free QUDT guidance for Dry ionomer density; the curated source reports [g/m^3].
Mass density of dry ionomer used to convert ionomer mass into ionomer volume.
Dry Reforming Of Methane Performance Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DryReformingOfMethanePerformanceMeasurement- Type
- Class, Measurement
Fixed-bed dry reforming of methane (DRM) catalytic performance test (conversions, etc.).
Drying Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DryingDuration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the duration of drying.
Drying Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DryingTemperature- Type
- Class, Characteristic
- altLabel
- annealing temperature; curing temperature; oven temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermodynamicTemperature | http://qudt.org/vocab/unit/K
http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with drying.
Mappings
- skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0008207 (drying temperature)
Drying Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DryingTime- Type
- Class, Characteristic
- altLabel
- annealing time; curing time; drying duration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with drying.
DSC Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DSCInstrument- Type
- Class, Instrument
- altLabel
- DSC 3+ STARe System; Mettler Toledo DSC; NETZSCH STA449 F3 (DSC)
An instrument corresponding to a DSC instrument and used in Differential Scanning Calorimetry Measurement.
Durability With Cycling Hours
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DurabilityWithCyclingHours- Type
- Class, Compatibility
- altLabel
- Durability with cycling; durability w/ cycling
- QUDT guidance
- http://qudt.org/vocab/quantitykind/TimeDuration | http://qudt.org/vocab/unit/HR
A property denoting durability with cycling hours and determined in MEA Durability Measurement.
Durability Without Cycling Hours
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DurabilityWithoutCyclingHours- Type
- Class, Compatibility
- altLabel
- Durability without cycling; durability w/o cycling
- QUDT guidance
- http://qudt.org/vocab/quantitykind/TimeDuration | http://qudt.org/vocab/unit/HR
A property denoting durability without cycling hours and determined in MEA Durability Measurement.
Duty Cycle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DutyCycle- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A quantitative characteristic specifying duty cycle under the conditions and reference basis stated with the record.
Dwell Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DwellTime- Type
- Class, Characteristic
- altLabel
- equilibration time; hold time; immersion time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with dwell.
Mappings
- skos:exactMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/dwe_tim_xxx-760e87eb75194dab84c3adec35f358e7-vp (Dwell Time)
Dye Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DyeConcentration- Type
- Class, Compatibility
- altLabel
- MB concentration; dye concentration (MB etc.)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Concentration
A composition characteristic that represents dye concentration for a material, component, process, measurement, or hydrogen-electrochemical system.
Dye Sensitization Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DyeSensitizationProcess- Type
- Class, Manufacturing
Soaking TiO2 photoanode in N719 dye solution (5.10e-3 M) for 18 h.
Dye Sensitized Solar Cell
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DyeSensitizedSolarCell- Type
- Class, Matter
- altLabel
- DSSC
A photovoltaic electrochemical cell in which a dye sensitizer absorbs light and transfers electronic charge to a semiconductor photoelectrode, with a charge-transfer medium regenerating the sensitizer.
Dynamic Hydrogen Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DynamicHydrogenElectrode- Type
- Class, Instrument
- altLabel
- DHE; H2 anode as reference electrode; hydrogen electrode
A hydrogen reference-electrode assembly in which a controlled current drives hydrogen evolution at a catalytic electrode, providing a reference potential close to the local reversible hydrogen potential with a current-dependent overpotential.
Dynamic light scattering
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DynamicLightScatteringMeasurement- Type
- Class, Measurement
- altLabel
- DLS; Dynamic Light Scattering Measurement; dynamic light scattering; dynamic scattered-light intensity analysis
Measurement of hydrodynamic radius/agglomerate size distribution in ink/solution.
Mappings
- skos:exactMatch
https://w3id.org/emmo/domain/characterisation-methodology/chameo#DynamicLightScattering (DynamicLightScattering)
Dynamic Light Scattering Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DynamicLightScatteringInstrument- Type
- Class, Instrument
- altLabel
- DLS instrument; light scattering instrument
An instrument that measures temporal fluctuations of scattered light to determine translational diffusion coefficients and infer hydrodynamic particle sizes using an appropriate diffusion model.
Dynamic vapor sorption
- IRI
https://w3id.org/h2kg/hydrogen-ontology#DynamicVaporSorptionMeasurement- Type
- Class, Measurement
- altLabel
- DVS; Dynamic Vapor Sorption Measurement; dynamic vapor sorption
A sorption measurement that monitors specimen mass while controlling vapor activity or relative humidity to determine vapor uptake, desorption, or sorption kinetics.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/process#AFP_0003765 (dynamic vapor sorption)
E Tek Commercial MEA
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ETekCommercialMEA- Type
- Class, Matter
A commercial membrane–electrode assembly supplied under the E-TEK product family, comprising an electrolyte membrane and adjoining electrode layers.
Ebecryl 8804
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Ebecryl8804- Type
- Class, Matter
EBECRYL 8804, a commercial aliphatic urethane diacrylate used in photocurable formulations.
Ebecryl 8807
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Ebecryl8807- Type
- Class, Matter
- altLabel
- aliphatic urethane diacrylate (Ebecryl 8807)
Aliphatic urethane diacrylate component of DLP elastomer resin.
ECSA Basis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ECSABasis- Type
- Class, NormalizationBasis
- altLabel
- Pt surface area basis; cm2_Pt
A normalization basis corresponding to ECSA basis and used as the reference basis for reporting quantitative results or properties.
ECSA by Double-Layer Capacitance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ECSAByDoubleLayerCapacitance- Type
- Class, Measurement
A measurement process that determines electrochemically active surface area from double-layer capacitance measurements using an electrochemical workstation and generating an experiment dataset.
ECSA Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ECSADataset- Type
- Class, Data
- altLabel
- CO stripping ECSA dataset; ECSA data; ECSA evolution dataset
A dataset containing ECSA data generated by Catalyst Ink Preparation, Cyclic Voltammetry, and Carbon Monoxide Stripping Voltammetry.
ECSA Loss Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ECSALossPercent- Type
- Class, Characteristic
- altLabel
- ECSA loss (%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting percent loss of ECSA after cycling/conditioning relative to initial.
EDDET
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EDDET- Type
- Class, Matter
- altLabel
- EDDET dithiol
2,2′-(Ethylenedioxy)diethanethiol, a difunctional thiol used as a chain extender in thiol–acrylate liquid-crystal elastomer formulations.
Effective Ionic Conductivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EffectiveIonicConductivity- Type
- Class, Characteristic
- altLabel
- effective proton conductivity; proton conductivity; proton conductivity (effective)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricConductivity | http://qudt.org/vocab/unit/S-PER-M
A property denoting effective ionic conductivity and determined in Electrochemical Impedance Spectroscopy Potentiostatic, Proton Conductivity Measurement, and Literature Review Synthesis.
Effective Oxygen Diffusion Coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EffectiveOxygenDiffusionCoefficient- Type
- Class, Characteristic
- altLabel
- Db; Dox; oxygen diffusivity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DiffusionCoefficient | http://qudt.org/vocab/unit/M2-PER-SEC
A property denoting effective oxygen diffusion coefficient and determined in Through-Plane Gas Transport Measurement, X Ray Computed Tomography Imaging, and Distribution Of Relaxation Times Analysis.
Efficiency Retention Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EfficiencyRetentionPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting percent of initial efficiency retained after aging/operation.
EIS Frequency Range
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EISFrequencyRange- Type
- Class, Characteristic
- altLabel
- frequency range
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A frequency characteristic specifying eis frequency range under the conditions and reference basis stated with the record.
EIS Max Frequency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EISMaxFrequency- Type
- Class, Characteristic
- altLabel
- EIS f_max; max frequency; maximum frequency
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
http://qudt.org/vocab/quantitykind/Frequency
A frequency characteristic specifying the repetition rate or oscillation frequency associated with eis max.
EIS Min Frequency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EISMinFrequency- Type
- Class, Characteristic
- altLabel
- EIS f_min; min frequency; minimum frequency
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
http://qudt.org/vocab/quantitykind/Frequency
A frequency characteristic specifying the repetition rate or oscillation frequency associated with eis min.
EIS Nyquist Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EISNyquistDataset- Type
- Class, Data
- altLabel
- EIS Nyquist plots; EIS data
A dataset containing EIS nyquist data generated by Electrochemical Impedance Spectroscopy Potentiostatic and Electrochemical Impedance Spectroscopy Galvanostatic.
EIS Perturbation Amplitude
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EISPerturbationAmplitude- Type
- Class, Characteristic
- altLabel
- AC amplitude; perturbation amplitude; sinusoidal amplitude
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Voltage | http://qudt.org/vocab/unit/MilliV
An AC-amplitude characteristic specifying the small alternating voltage or current perturbation applied during electrochemical impedance spectroscopy.
Elcometer 4340 Bar Coating Device
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Elcometer4340BarCoatingDevice- Type
- Class, Instrument
- altLabel
- Elcometer 4340; Mayer bar coater; Meyer rod (bar coater)
Bar-coating/film-applicator device used for film-casting deposition.
Electric Load
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectricLoad- Type
- Class, Instrument
- altLabel
- Höcherl and Hackl PLI1206ZVSV5 electric load; PLI1206ZVSV5 electric load; electronic load
Electronic load used to control current during fuel cell tests.
Electrical characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectricalCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing an electrical state, excitation, response, or transport behavior.
Electrical Percolation Threshold Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectricalPercolationThresholdVolumeFraction- Type
- Class, Characteristic
- altLabel
- critical volume fraction (e; φ_e
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
Critical volume fraction of the specified conductive phase at which a system-spanning electronically conducting network forms in the stated material model or experimental system.
Electrical Properties Table
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectricalPropertiesTable- Type
- Class, Data
Tabulated electrical conductivity, sheet resistance, and Hall mobility for SG films (vacuum filtration vs compressed pellet).
Electrical Resistivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectricalResistivity- Type
- Class, Characteristic
- altLabel
- resistivity (Ω·m)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Resistivity
A property denoting electrical resistivity and determined in Four Probe Resistance Measurement and Electrical Resistivity Measurement.
Electrical Resistivity Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectricalResistivityMeasurement- Type
- Class, Measurement
Electrical resistivity (or resistance-derived resistivity) measurement of electroless Cu patterns on PET.
Electrocatalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Electrocatalyst- Type
- Class, Matter
A catalyst material that promotes an electrochemical reaction at an electrode interface.
Electrocatalyst Support Stability Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrocatalystSupportStabilityPercent- Type
- Class, Compatibility
- altLabel
- Electrocataystsupport stablity; electrocatalyst support stability
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting electrocatalyst support stability percent and determined in Review Statement Extraction.
Electrochemical characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalCharacteristic- Type
- Class, Characteristic
A property describing electrical or chemical behavior associated with an electrochemical process or interface.
- subclasses
- Ag Ag Cl Potential Vs RHE, Anode Potential, Anode Reaction Resistance, Anode Resistance, Area Normalized Anode Resistance, Area Normalized Cathode Resistance, Area Normalized Overall Resistance, Bias Current, Bias Potential, Capacitance, Cathode Capacitance, Cathode Potential, Cathode Resistance, Cathodic Stripping Peak Current, Cell Capacitance, Cell Voltage, Cell Voltage Increase Rate, Cell Voltage Loss, Cell Voltage Loss Percent, Charge Transfer Coefficient, Charge Transfer Resistance, Cold Start Failure Voltage Threshold, Conditioning Voltage, Current Density, Current Retention Percent After Chronoamperometry, CV Potential Window, Deposition Potential, Double Layer Capacitance, External Resistance, Fitted Resistance From Polarization Curve, Fixed Charge Concentration In Dry Ionomer, Gravimetric Specific Capacitance, Half Wave Potential, Half Wave Potential Shift After ADT, High Frequency Resistance, Hydrogen Oxidation Charge Constant, Ionic Resistance, IRCompensation Fraction, Lateral Electronic Resistance, Lower Potential Limit, Membrane Bulk Resistance, Ohmic Resistance, Ohmic Resistance Increase Percent, Ohmic Resistance Reduction Percent, Onset Potential, Open Circuit Voltage, Operating Voltage, Peak Current, Peak Potential, Polarization Resistance, Potential Of Total Zero Charge, Potential Window, Protonic Catalyst Layer Resistance, Pt Hydrogen Adsorption Specific Charge, Pt Mass Specific Current, Pulse Current, Reduction Peak Current, Reduction Peak Potential, Reduction Potential, Ring Potential, Sheet Resistance, Surface Film Resistance, Tafel Slope, Total Internal Resistance, Upper Potential Limit, Warburg Impedance, Zeta Potential, Zeta Potential Stability Threshold
Electrochemical component
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalComponent- Type
- Class, Matter
An engineered object that performs a material, electrical, electrochemical, or transport function within an electrochemical system.
Electrochemical dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalDataset- Type
- Class, Data
A dataset containing observations or results produced by an electrochemical measurement or analysis.
Electrochemical Impedance Spectroscopy Galvanostatic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalImpedanceSpectroscopyGalvanostatic- Type
- Class, Measurement
- altLabel
- EIS; galvanostatic impedance spectroscopy; impedance spectra
A galvanostatic electrochemical impedance spectroscopy measurement performed under defined gas-side, thermal, humidity, and pressure operating conditions to generate impedance datasets for subsequent equivalent-circuit or transport analysis.
Electrochemical Impedance Spectroscopy Potentiostatic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalImpedanceSpectroscopyPotentiostatic- Type
- Class, Measurement
- altLabel
- EIS; electrochemical impedance spectroscopy; impedance spectroscopy
A potentiostatic electrochemical impedance spectroscopy measurement performed under defined gas-side, thermal, humidity, pressure, and potential-control conditions to generate impedance datasets for subsequent analysis.
Electrochemical measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalMeasurement- Type
- Class, Measurement
A characterization measurement that observes electrical and chemical behavior at an electrochemical interface or in an electrochemical device.
- subclasses
- Carbon Monoxide Displacement Chronoamperometry, Carbon Monoxide Stripping Voltammetry, Cathodic Stripping Voltammetry, Chronoamperometry Measurement, Chronopotentiometry Measurement, Current-Interrupt HFR Measurement, Cyclic Voltammetry, Fuel Cell Polarization Measurement, Galvanostatic Charge Discharge Measurement, Linear Sweep Voltammetry, MEA Polarization, Microbial Fuel Cell Polarization Measurement, Microelectrode Water Electrolyzer Polarization Measurement, Organic Flow Battery Polarization Measurement, Rotating Ring Disk Voltammetry, Square Wave Voltammetry, Tafel Polarization Measurement
Mappings
- rdfs:subClassOf
https://w3id.org/emmo/domain/electrochemistry#electrochemistry_7729c34e_1ae9_403d_b933_1765885e7f29 (Electrochemical measurement)
Electrochemical operating characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalOperatingCharacteristic- Type
- Class, Characteristic
An operating characteristic that specifies or describes the operating state of an electrochemical process, cell, or system.
Electrochemical Reaction Simulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalReactionSimulation- Type
- Class, Process
- altLabel
- mass transfer simulation
A computational model execution that predicts electrochemical reaction rates or currents together with specified coupled species-transport and charge-transport behavior in an electrode or cell.
Electrochemical system
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalSystem- Type
- Class, Matter
A device in which electrochemical reactions and charge transport are arranged to convert, store, produce, or consume energy or chemical species.
- subclassOf / subPropertyOf
- Device
Electrochemical test instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalTestInstrument- Type
- Class, Instrument
An instrument used to impose, control, or record electrical and operating conditions during an electrochemical measurement or device test.
Electrochemical Workstation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicalWorkstation- Type
- Class, Instrument
- altLabel
- CHI760E electrochemical workstation; electrochemical analyzer; electrochemical impedance spectroscope / potentiostat
An instrument corresponding to an electrochemical workstation and used in MEAPolarization, Square Wave Voltammetry, and Electrochemical Impedance Spectroscopy Potentiostatic.
Electrochemically Active Surface Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrochemicallyActiveSurfaceArea- Type
- Class, Characteristic
- altLabel
- ECSA; Pt surface area; accessible electrochemically surface area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerMass | http://qudt.org/vocab/unit/M2-PER-GM
http://qudt.org/vocab/quantitykind/AreaPerMass
Area of the catalyst surface that participates in a specified electrochemical probe reaction under the stated measurement conditions.
Mappings
- skos:broadMatch
http://emmo.info/emmo#EMMO_96f39f77_44dc_491b_8fa7_30d887fe0890 (Area) - skos:broadMatch
http://semanticscience.org/resource/SIO_000045 (area) - skos:broadMatch
https://saref.etsi.org/saref4inma/Area (Area)
Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrodeComponent- Type
- Class, Matter
An electrochemical component through which electronic charge enters or leaves an electrochemical reaction region.
- subclasses
- Air Breathing Cathode, Anode GDE, Carbon Felt Electrode, Catalyst-layer component, Cathode GDE, Cu 2 WS 4 Counter Electrode, Electrode Substrate, Gas-diffusion-layer component, Glassy Carbon Disk Electrode, Graphite Rod Counter Electrode, Interdigitated Electrode Array, Platinum Wire Counter Electrode, Printed Gold Electrode, Pt Counter Electrode
Mappings
- skos:narrowMatch
http://purl.obolibrary.org/obo/CHMO_0002345 (reference electrode)
Electrode Compression Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrodeCompressionPressure- Type
- Class, Characteristic
- altLabel
- compression pressure
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure | http://qudt.org/vocab/unit/PERCENT
A pressure characteristic specifying the pressure associated with electrode compression.
Electrode Side Length
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrodeSideLength- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting linear dimension of square/rectangular electrode or MEA (cm).
Electrode Sintering
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrodeSintering- Type
- Class, Manufacturing
- altLabel
- dried and sintered; thermal sintering between layers
Thermal treatment of sprayed electrodes (190°C for 1 h in inert ventilated oven).
Electrode Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrodeSubstrate- Type
- Class, Matter
- altLabel
- macroporous substrate
A supporting material or structure on which an electrode or catalyst-containing reaction layer is formed and that provides the required mechanical support and, where applicable, electronic conduction.
Electroless Copper Plating Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrolessCopperPlatingProcess- Type
- Class, Manufacturing
- altLabel
- electroless Cu plating
Autocatalytic electroless deposition of copper on Pd-activated PET substrates from alkaline formaldehyde bath.
Electrolyte
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Electrolyte- Type
- Class, Matter
- altLabel
- electrolytic medium
A material that conducts ionic charge and provides an ion-transport medium in an electrochemical system, including liquid, gel, polymer, or solid electrolytes.
Electrolyte Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrolyteConcentration- Type
- Class, Characteristic
- altLabel
- H2SO4 concentration; acid concentration; dopant concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentration | http://qudt.org/vocab/unit/MOL-PER-L
http://qudt.org/vocab/quantitykind/AmountConcentration
Composition characteristic expressing the quantity of an identified dissolved electrolyte species per unit volume of the final solution, with amount, mass, or another declared volume-based concentration kind specified.
Mappings
- skos:broadMatch
http://edamontology.org/data_2140 (Concentration) - skos:broadMatch
http://purl.obolibrary.org/obo/CHMO_0002820 (concentration) - skos:broadMatch
https://w3id.org/nfdi4cat/voc4cat_0007244 (concentration)
Electrolyte material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrolyteMaterial- Type
- Class, Matter
A material entity that supports ionic transport in an electrochemical system.
Electrolyte PH
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrolytePH- Type
- Class, Characteristic
- altLabel
- pH; pH 7.5; pH=1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A quantitative characteristic specifying electrolyte ph under the conditions and reference basis stated with the record.
Electrolyte Type
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrolyteType- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/unit/UNITLESS
A categorical characteristic identifying electrolyte type under the conditions and reference basis stated with the record.
Electrolyzer system
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrolyzerSystem- Type
- Class, Matter
An electrochemical system that uses electrical energy to drive a non-spontaneous reaction that produces hydrogen or another chemical product.
Electron Beam Energy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronBeamEnergy- Type
- Class, Characteristic
- altLabel
- SEM beam energy
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Energy
An energy characteristic specifying the energy associated with electron beam.
Mappings
- skos:broadMatch
https://w3id.org/nfdi4cat/voc4cat_0007108 (beam energy) - skos:exactMatch
http://purl.obolibrary.org/obo/MS_1003410 (electron beam energy)
Electron Beam Evaporation Deposition
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronBeamEvaporationDeposition- Type
- Class, Manufacturing
- altLabel
- e-beam evaporation; electron beam evaporation
Deposition process used to coat Si wafer with aluminum thin film.
Electron Current
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronCurrent- Type
- Class, Characteristic
- altLabel
- SEM beam current
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrent
Magnitude of electric charge carried by the electron beam per unit time during electron-microscopy or tomography acquisition.
Electron microscope
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronMicroscope- Type
- Class, Instrument
An imaging instrument that uses an electron beam and electron-matter interactions to acquire microscopy data.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001088 (electron microscope) - skos:exactMatch
http://purl.obolibrary.org/obo/OBI_0000990 (electron microscope)
Electron microscopy image dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronMicroscopyImageDataset- Type
- Class, Data
An image dataset produced by an electron microscopy measurement or its subsequent processing.
Electron Microscopy Imaging
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronMicroscopyImaging- Type
- Class, Measurement
- altLabel
- FESEM imaging; FIB-SEM cross section imaging; electron microscopy
Electron microscopy imaging used to observe Pt nanoparticle size, agglomerates, and ionomer films.
Electron microscopy measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronMicroscopyMeasurement- Type
- Class, Measurement
- altLabel
- Electron Microscopy Measurement
An imaging measurement that uses an electron beam and electron-matter interactions to produce image or analytical data about a specimen.
Mappings
- skos:exactMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ele_mic_xxx-840bbf9ffd9648fc883b251d106e3733-vp (Electron Microscopy) - skos:narrowMatch
http://purl.obolibrary.org/obo/CHMO_0000073 (scanning electron microscopy) - skos:narrowMatch
http://www.bioassayontology.org/bao#BAO_0000454 (scanning electron microscopy) - skos:narrowMatch
https://w3id.org/emmo/domain/characterisation-methodology/chameo#ScanningElectronMicroscopy (ScanningElectronMicroscopy)
Electron spin resonance spectroscopy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronSpinResonanceSpectroscopyMeasurement- Type
- Class, Measurement
- altLabel
- Electron Spin Resonance Spectroscopy Measurement
ESR spectroscopy used to detect reactive oxygen species (•OH, •O2−) via spin-trap (DMPO).
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0000328 (electron spin resonance spectroscopy)
Electron Tomography Imaging
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronTomographyImaging- Type
- Class, Measurement
- altLabel
- electron tomography
Electron tomography (tilt-series + reconstruction) used to compute 3D volume and accessible surface area of catalyst networks.
Electron tomography measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronTomographyMeasurement- Type
- Class, Measurement
A tomography measurement that uses electron-beam images or serial electron-microscopy sections to reconstruct specimen structure.
Electron Transfer Number
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronTransferNumber- Type
- Class, Characteristic
- altLabel
- electrons transferred; n electrons transferred; number of electrons
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS
A property denoting electron transfer number and determined in Rotating Ring Disk Voltammetry and Linear Sweep Voltammetry.
Electronic Conductivity Anisotropy Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronicConductivityAnisotropyRatio- Type
- Class, Characteristic
- altLabel
- IP/TP ratio; anisotropy ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
Electronic conductivity measured in the plane of a specimen divided by its electronic conductivity measured through the specimen thickness, for the same specimen state and measurement conditions.
Electronic Conductivity Loss Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectronicConductivityLossPercent- Type
- Class, Characteristic
- altLabel
- conductivity loss; loss in in-plane conductivity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/RelativeChangePercent | http://qudt.org/vocab/unit/PERCENT
A property denoting electronic conductivity loss percent and determined in Ex Situ Hydration Test.
Electrospinning Applied Voltage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrospinningAppliedVoltage- Type
- Class, Characteristic
- altLabel
- applied voltage
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential
Electric potential applied to the electrospinning needle or spinneret relative to the explicitly specified electrical reference of the apparatus.
Electrospinning Collector Voltage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrospinningCollectorVoltage- Type
- Class, Characteristic
- altLabel
- collector voltage
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential
Electric potential of the electrospinning collector relative to the explicitly specified electrical reference of the apparatus.
Electrospinning Deposition
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrospinningDeposition- Type
- Class, Manufacturing
- altLabel
- electrospun
A manufacturing process for electrospinning deposition using Catalyst Ink and Proton Exchange Membrane and producing Cathode Catalyst Layer, Electrospun Catalyst Layer, and Ionomer Nanofiber Scaffolding Catalyst Layer.
Electrospinning Ink Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrospinningInkFlowRate- Type
- Class, Compatibility
- altLabel
- Q; flow rate; ink flow rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LengthPerTime
A transport characteristic that represents electrospinning ink flow rate for a material, component, process, measurement, or hydrogen-electrochemical system.
Electrospinning Needle Gauge
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrospinningNeedleGauge- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A quantitative characteristic specifying electrospinning needle gauge under the conditions and reference basis stated with the record.
Electrospinning Needle Inner Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrospinningNeedleInnerDiameter- Type
- Class, Characteristic
- altLabel
- inner diameter; needle diameter; spinneret diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of electrospinning needle inner.
Electrospinning Needle To Collector Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrospinningNeedleToCollectorDistance- Type
- Class, Characteristic
- altLabel
- needle-collector distance; needle-to-substrate distance; spinneret-to-collector distance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying electrospinning needle to collector distance under the conditions and reference basis stated with the record.
Electrospray Deposition
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrosprayDeposition- Type
- Class, Manufacturing
- altLabel
- electro-spraying; electrosprayed; electrostatic spray
A manufacturing process for electrospray deposition using Catalyst Ink and Proton Exchange Membrane with Syringe Pump, High Voltage Power Supply, and XY Moving Stage and producing Cathode Catalyst Layer, Electrosprayed Catalyst Layer, and Ionomer Nanofiber Scaffolding Catalyst Layer.
Electrosprayed Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrosprayedCatalystLayer- Type
- Class, Matter
- altLabel
- commercial electro-sprayed catalyst layer; electrosprayed PGM-free catalyst layer; electrosprayed electrode
Catalyst layer fabricated via electrospray deposition from catalyst ink.
Electrospun Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElectrospunCatalystLayer- Type
- Class, Matter
Catalyst layer fabricated via electrospinning deposition (nanofiber structure).
Elman Neural Network Model
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElmanNeuralNetworkModel- Type
- Class, ModelArtifact
- altLabel
- Elman network
A recurrent neural-network model in which context units retain a previous hidden-layer state and supply it to subsequent hidden-state computations.
Elongation At Break
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ElongationAtBreak- Type
- Class, Characteristic
- altLabel
- strain at break
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting elongation at break of membrane (undoped/doped).
ELS Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ELSInstrument- Type
- Class, Instrument
- altLabel
- ELS
An instrument that measures electrophoretic mobility from light scattered by particles moving in an applied electric field and can estimate zeta potential using a stated electrokinetic model.
Energy characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EnergyCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing energy, energy density, or an energy-related experimental setting.
- subclasses
- Band Gap Energy, Electron Beam Energy, Energy Filter Width, Hydrogen Bonding Energy, Ion Beam Energy, Normalized Energy Recovery, Phosphoric Acid Adsorption Energy On Pt, Phosphoric Acid Binding Energy, Solar Energy Fraction Infrared, Solar Energy Fraction UV, Solar Energy Fraction Visible, X Ray Beam Energy, XPS Pass Energy
Energy Dispersive X Ray Spectroscopy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EnergyDispersiveXRaySpectroscopy- Type
- Class, Measurement
- altLabel
- EDX; energy dispersive spectrometry; energy dispersive spectrometry (EDS)
EDX in STEM mode used to quantify Pt and Ru atomic percentages and Pt/Ru ratio in particles/networks.
Energy Efficiency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EnergyEfficiency- Type
- Class, Characteristic
- altLabel
- EE; energy efficiency (average)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Efficiency | http://qudt.org/vocab/unit/PERCENT
A property denoting energy efficiency of full ORFB cell during galvanostatic cycling (discharge energy / charge energy).
Mappings
- skos:exactMatch
http://www.w3id.org/ecsel-dr-RAMI40#Energy_Efficiency (Energy Efficiency)
Energy Filter Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EnergyFilterWidth- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Energy
A geometric characteristic specifying the width of energy filter.
Engineered object
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EngineeredObject- Type
- Class, Matter
A matter entity intentionally manufactured or assembled to perform one or more technical functions.
- subclassOf / subPropertyOf
- Matter
Environmental Chamber
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EnvironmentalChamber- Type
- Class, Instrument
- altLabel
- climate chamber
An instrument corresponding to an environmental chamber and used in Through-Plane Gas Transport Measurement.
Envisiontec 3 D Bio Plotter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Envisiontec3DBioPlotter- Type
- Class, Instrument
Extrusion-based 3D printer used to extrude microfilaments.
Epoxidized Castor Oil
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EpoxidizedCastorOil- Type
- Class, Matter
- altLabel
- ECO
Epoxidized castor oil intermediate produced by epoxidation of castor oil and used for dispersant synthesis.
Epoxidized Soybean Oil
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EpoxidizedSoybeanOil- Type
- Class, Matter
Epoxidized soybean oil intermediate produced by epoxidation of soybean oil and used for dispersant synthesis.
Epoxy Equivalent Titration Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EpoxyEquivalentTitrationMeasurement- Type
- Class, Measurement
- altLabel
- titration of epoxy equivalent
Titration method used to determine epoxy equivalent / oxirane content in epoxidized oils (Section 2.2.6).
Epoxy Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EpoxyResin- Type
- Class, Matter
- altLabel
- epoxy resin pore filling
Used to pore-fill CCM piece for FIB-SEM; generic epoxy resin (paper does not specify product).
EQE Spectrometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EQESpectrometer- Type
- Class, Instrument
- altLabel
- EQE system; QE spectrometer
Instrument/system for EQE measurement.
Equivalent Circuit Fitting
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EquivalentCircuitFitting- Type
- Class, Process
- altLabel
- equivalent circuit analysis
A post-processing analysis process that fits impedance data to an equivalent circuit model in order to extract derived electrochemical parameters.
Equivalent ionomer film thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EquivalentIonomerFilmThickness- Type
- Class, Characteristic
- altLabel
- CCL ionomer effective film thickness
- notation
- t
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/M | Value-free QUDT guidance for Equivalent ionomer film thickness; the curated source reports [m].
Effective uniform thickness of the ionomer film obtained from its volume and the secondary-pore area it covers.
Equivalent ionomer patch radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EquivalentIonomerPatchRadius- Type
- Class, Characteristic
- notation
- rion
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/M | Value-free QUDT guidance for Equivalent ionomer patch radius; the curated source reports [m].
Equivalent radius representing the characteristic size of finite ionomer patches distributed over the secondary-pore surface.
Equivalent Spray Coating Pass Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EquivalentSprayCoatingPassCount- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic that represents equivalent spray coating pass count for a material, component, process, measurement, or hydrogen-electrochemical system.
ESR Spectrometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ESRSpectrometer- Type
- Class, Instrument
- altLabel
- X-band Bruker spectrometer (ESP-500)
ESR spectrometer used for detecting radical species with DMPO spin trap.
ETFE Sheet Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ETFESheetSubstrate- Type
- Class, Matter
- altLabel
- ETFE sheet; decal substrate
A sheet of ethylene–tetrafluoroethylene copolymer used as a substrate or removable carrier.
Ethane Cryogen
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthaneCryogen- Type
- Class, Matter
- altLabel
- liquid ethane
Liquid ethane used as cryogen for plunge freezing to avoid Leidenfrost effect and ice-crystal artifacts.
Ethanol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Ethanol- Type
- Class, Matter
- altLabel
- ethanol dispersion; ethanol media; ethanol solvent
Alcohol component of the binary ink solvent (water/ethanol).
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_16236 (Ethanol)
Ethanol Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthanolMassFractionInInk- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Ethanol Mass Fraction In Ink.
Ethanol Mass In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthanolMassInInk- Type
- Class, Characteristic
- altLabel
- Ethanol
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying ethanol mass in ink under the conditions and reference basis stated with the record.
Ethanol To Water Volume Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthanolToWaterVolumeRatio- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeRatio
Volume of ethanol divided by volume of water used to prepare the specified mixture, with both component volumes measured before mixing under stated conditions.
Ethanol Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthanolVolume- Type
- Class, Characteristic
- altLabel
- ethanol (mL)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by ethanol.
Ethanol Volume Fraction In Solvent Mixture
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthanolVolumeFractionInSolventMixture- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
Volume of ethanol divided by the sum of the volumes of all solvent components before mixing, with component volumes evaluated at the same stated temperature.
Ethyl Acetate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthylAcetate- Type
- Class, Matter
A material entity representing ethyl acetate under the conditions and reference basis stated with the record.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_27750 (ethyl acetate)
Ethyl Acetate Mass In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthylAcetateMassInInk- Type
- Class, Characteristic
- altLabel
- Ethyl acetate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying ethyl acetate mass in ink under the conditions and reference basis stated with the record.
Ethylene Gas
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthyleneGas- Type
- Class, Matter
A material entity corresponding to an ethylene gas and used as an input in Ambient Pressure Chemical Vapor Deposition Synthesis and Water Assisted Low Pressure CVD.
Ethylene Glycol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthyleneGlycol- Type
- Class, Matter
- altLabel
- EG; ethylene glycol solvent
Main low-volatility solvent (vehicle) for catalyst ink in PICL1/PICL2.
Ethylene Glycol Butyl Ether
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthyleneGlycolButylEther- Type
- Class, Matter
- altLabel
- EGBE
Surfactant/additive used in ink formulation.
Ethylene Glycol Diethyl Ether
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthyleneGlycolDiethylEther- Type
- Class, Matter
Ethylene glycol diethyl ether (EGDEE) solvent used for catalyst ink.
Ethylene Glycol Dimethyl Ether
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthyleneGlycolDimethylEther- Type
- Class, Matter
Ethylene glycol dimethyl ether (EGDME) solvent used for catalyst ink.
Ethylene Glycol Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthyleneGlycolVolumeFraction- Type
- Class, Characteristic
- altLabel
- ethylene glycol; ethylene glycol vol%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
Volume of ethylene glycol divided by the sum of the volumes of all solvent components before mixing, with component volumes evaluated at the same stated temperature.
Ethylene Volumetric Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EthyleneVolumetricFlowRate- Type
- Class, Characteristic
- altLabel
- ethylene flow
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumetricFlowRate
A transport characteristic specifying the quantity of ethylene volumetric passing a reference boundary per unit time.
Evaporation Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#EvaporationTemperature- Type
- Class, Characteristic
- altLabel
- rotavapor temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with evaporation.
Ex Situ Hydration Test
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExSituHydrationTest- Type
- Class, Measurement
- altLabel
- ex-situ hydration; hydration test
A measurement process that uses ex situ hydration test to determine Water Uptake Ratio, Electronic Conductivity Loss Percent, and Swelling Fraction.
Exchange Coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExchangeCoefficient- Type
- Class, Compatibility
- altLabel
- charge transfer coefficient
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A quantitative characteristic that represents exchange coefficient for a material, component, process, measurement, or hydrogen-electrochemical system.
Exchange Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExchangeCurrentDensity- Type
- Class, Characteristic
- altLabel
- i0; i_ef; i_ref
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity
A density characteristic specifying the stated amount of exchange current per unit reference volume or area.
Excimer Laser Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExcimerLaserInstrument- Type
- Class, Instrument
- altLabel
- KrF excimer laser
KrF excimer laser used in pulsed laser deposition (PLD) of catalyst/support films.
Exfoliated Silica Nanosheet
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExfoliatedSilicaNanosheet- Type
- Class, Matter
- altLabel
- E–SN
Liquid-phase exfoliated few-layer silica nanosheets.
Experiment Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExperimentDataset- Type
- Class, Data
- altLabel
- USAXS data; experimental dataset; scattering data
A dataset containing experiment data generated by Oxygen Gain/Loss Measurement, O2–N2 Switching Measurement, and Through-Plane Gas Transport Measurement.
Exposure Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExposureTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with exposure.
Mappings
- skos:exactMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/exp_tim_xxx-d06c7708430f446398944d57f6465b3c-vp (Exposure Time)
External Quantum Efficiency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExternalQuantumEfficiency- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting external quantum efficiency and determined in Review Statement Extraction and External Quantum Efficiency Measurement.
External Quantum Efficiency Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExternalQuantumEfficiencyDataset- Type
- Class, Data
A dataset containing external quantum efficiency data generated by External Quantum Efficiency Measurement.
External Quantum Efficiency Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExternalQuantumEfficiencyMeasurement- Type
- Class, Measurement
- altLabel
- EQE measurement; external quantum efficiency spectra
Spectral EQE measurement versus wavelength.
External Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExternalResistance- Type
- Class, Characteristic
- altLabel
- external resistance (100 Ω); load resistor
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricalResistance | http://qudt.org/vocab/unit/OHM
An electrical characteristic specifying resistance to electric or ionic charge transport through external.
Extrusion Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ExtrusionPressure- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A pressure characteristic specifying the pressure associated with extrusion.
F 1 s Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#F1sAtomicPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AtomPercent
A property denoting atomic percent of fluorine (from F 1s signal) measured by XPS.
F 19 NMR Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#F19NMRInstrument- Type
- Class, Instrument
- altLabel
- ¹⁹F NMR
NMR instrument used to quantify Nafion adsorption isotherms (19F-NMR).
F 19 NMR Mobility Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#F19NMRMobilityMeasurement- Type
- Class, Measurement
- altLabel
- fluorine-19 NMR mobility measurement
Quantifies Nafion main-chain and side-chain mobility in solvent dispersions using 19F NMR peak analysis.
Fabrication Design Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FabricationDesignSpecification- Type
- Class, Specification
- altLabel
- design specification
A specification of intended fabrication design quantities and constraints, such as catalyst loadings, active areas, layer dimensions, or component arrangement.
FAME Content
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FAMEContent- Type
- Class, Compatibility
- altLabel
- FAME; biodiesel content; ester content
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting fatty acid methyl ester (FAME) content in biodiesel phase after reaction.
Faraday Constant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FaradayConstant- Type
- Class, Characteristic
- altLabel
- F; Faraday's constant
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricChargePerAmountOfSubstance
A quantitative characteristic specifying faraday constant under the conditions and reference basis stated with the record.
Fe 2 O 3 Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Fe2O3Powder- Type
- Class, Matter
- altLabel
- Fe2O3; Fe₂O₃
Iron(III) oxide powder feedstock used in blended oxide inks.
Fe 20 Ni 5 Mo Alloy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Fe20Ni5MoAlloy- Type
- Class, Matter
Target alloy composition after co-reduction/interdiffusion (20 at.% Ni, 5 at.% Mo, balance Fe).
Fe 20 Ni Alloy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Fe20NiAlloy- Type
- Class, Matter
Target alloy composition after co-reduction/interdiffusion (20 at.% Ni, balance Fe).
Fe AA Pyr Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeAAPyrCatalyst- Type
- Class, Matter
- altLabel
- Fe-AAPyr
PGM-free Fe-N-C catalyst prepared using aminoantipyrine (AAPyr) precursor via sacrificial support method.
Fe Co AA Pyr Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeCoAAPyrCatalyst- Type
- Class, Matter
- altLabel
- Fe-Co; Fe-Co-AAPyr
Bimetallic PGM-free Fe–Co–N–C catalyst (AAPyr-derived).
Fe Co Bimetallic Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeCoBimetallicCatalyst- Type
- Class, Matter
- altLabel
- FeCo catalyst; bimetallic catalyst FeCo
Fe–Co bimetallic catalyst layer on Al foil used to grow VACNT via PECVD.
Fe Doped Graphene Flakes
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeDopedGrapheneFlakes- Type
- Class, Matter
- altLabel
- Fe-doped biomass-derived graphene
Fe-doped biomass-derived graphene used as ORR catalyst support; Fe introduced by pyrolysis of Fe-loaded graphene.
Fe Mn AA Pyr Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeMnAAPyrCatalyst- Type
- Class, Matter
- altLabel
- Fe-Mn; Fe-Mn-AAPyr; Fe-Mn-N-C
Bimetallic PGM-free Fe–Mn–N–C catalyst (AAPyr-derived); best-performing in this study.
Fe N 4 Site Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeN4SiteDensity- Type
- Class, Compatibility
- altLabel
- active site density; site density (SD)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstancePerMass
A property denoting estimated density of Fe–N4 sites from N 1s XPS fitting (assumption: 399.5 eV component originates from Fe–N4).
Fe NC Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeNCCatalyst- Type
- Class, Matter
- altLabel
- Fe–N–C; PGM-free catalyst; non-PGM catalyst
Carbon-based iron–nitrogen catalyst used as ORR cathode electrocatalyst (PGM-free).
Fe Ni AA Pyr Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeNiAAPyrCatalyst- Type
- Class, Matter
- altLabel
- Fe-Ni; Fe-Ni-AAPyr
Bimetallic PGM-free Fe–Ni–N–C catalyst (AAPyr-derived).
Fe Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FePowder- Type
- Class, Matter
- altLabel
- Fe
Elemental iron powder feedstock used in metal powder inks.
Fe To Co Molar Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeToCoMolarRatio- Type
- Class, Characteristic
- altLabel
- Co=2:3; Fe; Fe:Co ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A dimensionless characteristic expressing the stated ratio identified as Fe To Co Molar Ratio.
Feed Methane Volume Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeedMethaneVolumeRatio- Type
- Class, Compatibility
- altLabel
- volume ratio of feed methane
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A geometric characteristic that represents feed methane volume ratio for a material, component, process, measurement, or hydrogen-electrochemical system.
Feed Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FeedRate- Type
- Class, Characteristic
- altLabel
- ink feeding rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Speed
A rate characteristic specifying the quantity of material supplied to a process per unit time, with the transported quantity and basis stated explicitly.
Fenton Oxidative Stability Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FentonOxidativeStabilityMeasurement- Type
- Class, Measurement
Oxidative stability test by immersing in Fenton reagent and measuring residual weight.
Ferritin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Ferritin- Type
- Class, Matter
- altLabel
- ferritin (model protein)
Target protein analyte and template for imprinting.
Ferritin Analyte Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FerritinAnalyteConcentration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarConcentration
Amount of substance of the identified ferritin analyte divided by the final volume of the incubation solution used in the sensing assay.
Ferritin Cavity Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FerritinCavityDiameter- Type
- Class, Characteristic
- altLabel
- cavity diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting ferritin cavity diameter.
Ferritin Iron Ion Capacity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FerritinIronIonCapacity- Type
- Class, Characteristic
- altLabel
- iron ions per ferritin; up to 4500 iron ions
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A property denoting maximum number of iron ions stored in ferritin cavity (count).
Ferritin Mass Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FerritinMassConcentration- Type
- Class, Characteristic
- altLabel
- concentration of ferritin; ferritin concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassConcentration
A composition characteristic specifying the amount of ferritin mass per stated quantity of mixture or solution.
Ferritin Surfactant Micelle Complex
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FerritinSurfactantMicelleComplex- Type
- Class, Matter
Micellar complex where ferritin molecules are incorporated into alkylpolyglycoside micelles (1@2).
Ferritin Template Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FerritinTemplateConcentration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassConcentration
Mass of ferritin used as the molecular-imprinting template divided by the volume of the template-containing precursor mixture.
FIB SEM Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FIBSEMInstrument- Type
- Class, Instrument
- altLabel
- FIB-SEM; dual-beam FIB-SEM; focused ion beam scanning electron microscope
An instrument corresponding to a focused ion beam scanning electron microscope used in FIBSEM Tomography Measurement.
Fiber Ionomer To Carbon Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FiberIonomerToCarbonRatio- Type
- Class, Characteristic
- altLabel
- I_fiber/C; fiber/carbon ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
Ratio of the dry mass of ionomer present as electrospun fibers to the mass of carbon support in the specified catalyst layer.
Fiber Ionomer Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FiberIonomerVolumeFraction- Type
- Class, Compatibility
- altLabel
- fiber ionomer vol%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
A geometric characteristic that represents fiber ionomer volume fraction for a material, component, process, measurement, or hydrogen-electrochemical system.
Fiber Optic Oxygen Probe
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FiberOpticOxygenProbe- Type
- Class, Instrument
- altLabel
- high-speed fiber optic oxygen probe (OXR430-UHS)
An instrument corresponding to a fiber-optic oxygen probe and used in in-plane effective diffusivity measurement.
Fiber Orientation Angle Std Dev
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FiberOrientationAngleStdDev- Type
- Class, Characteristic
- altLabel
- fiber angle standard deviation; fiber angle std dev
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle
A property denoting standard deviation (degrees) of fiber orientation angle distribution measured from XCT images.
FIBSEM Tomography Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FIBSEMTomographyMeasurement- Type
- Class, Measurement
- altLabel
- FIB-SEM; FIB-SEM tomography
A measurement process that uses focused ion beam scanning electron microscopy tomography to determine pore-size distribution, porosity, bottleneck descriptors, and transport-related microstructure metrics from reconstructed porous specimens.
Fiji Image J Software
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FijiImageJSoftware- Type
- Class, SoftwareArtifact
- altLabel
- Fiji ImageJ
An ImageJ-based software distribution that bundles plugins and tools for scientific image processing, visualization, segmentation, and quantitative analysis.
Filament Deflection
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FilamentDeflection- Type
- Class, Characteristic
- altLabel
- midspan deflection
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting estimated midspan deflection of printed filament/strut span (µm).
Filament On Demand Mode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FilamentOnDemandMode- Type
- Class, Manufacturing
- altLabel
- filament-on-demand
DIW deposition mode where extrusion is started/stopped per-pillar (analogous to inkjet drop-on-demand), enabling vertical free-standing pillars.
Fill Factor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FillFactor- Type
- Class, Characteristic
- altLabel
- FF
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting fill factor of photovoltaic device (dimensionless or %).
Filler Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FillerWeightPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the mass percentage assigned to filler on the stated reference basis.
Film Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FilmThickness- Type
- Class, Characteristic
- altLabel
- bi-layer thickness; flake thickness; pattern thickness
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting film thickness and determined in Atomic Force Microscopy Measurement, SEM Imaging, and Film Thickness Measurement.
Mappings
- skos:narrowMatch
http://purl.allotrope.org/ontologies/result#AFR_0002609 (chromatography column film thickness)
Film Thickness Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FilmThicknessMeasurement- Type
- Class, Measurement
- altLabel
- film thickness measurement (HRTEM); printed film thickness
Thickness measurement of printed ink film on polypropylene substrate using micrometer (Section 2.4.1.1).
Finite Element Analysis Simulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FiniteElementAnalysisSimulation- Type
- Class, Process
- altLabel
- Abaqus simulation; FEA; finite element simulation
A computational model execution that approximates the governing equations of a specified system on a finite-element discretization to predict fields, deformation, or other model responses.
Fitted Resistance From Polarization Curve
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FittedResistanceFromPolarizationCurve- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance
A fitted electrical-resistance characteristic inferred from a semi-empirical polarization-curve model and representing the resistance contribution defined by that model.
Fixed Bed Reactor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FixedBedReactor- Type
- Class, Instrument
- altLabel
- CVD reactor; fixed-bed column; quartz tube reactor
Fixed-bed reactor setup for DRM catalytic testing.
Fixed Charge Concentration In Dry Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FixedChargeConcentrationInDryIonomer- Type
- Class, Characteristic
- altLabel
- c_f; fixed charge concentration in dry Nafion
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstancePerVolume
Amount of fixed ionic charge sites in an ionomer divided by the volume of the dry ionomer.
Flexural Strength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FlexuralStrength- Type
- Class, Characteristic
- altLabel
- fracture strength
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Stress
A property denoting flexural strength of pyrolyzed bars measured in three-point bending (MPa).
Flow Channel
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FlowChannel- Type
- Class, Matter
- altLabel
- air channel; current flow channel; gas channel
A material entity corresponding to a flow channel and used as an input in PEMFCCFD Simulation.
Flow Channel Height
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FlowChannelHeight- Type
- Class, Characteristic
- altLabel
- channel height
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying flow channel height under the conditions and reference basis stated with the record.
Flow Channel Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FlowChannelWidth- Type
- Class, Characteristic
- altLabel
- channel width
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the width of flow channel.
Flow Field
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FlowField- Type
- Class, Matter
- altLabel
- flow channel field
A material entity corresponding to a flow-field component that distributes reactant gases within single-cell fuel-cell hardware.
Flow Field Design
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FlowFieldDesign- Type
- Class, Characteristic
- altLabel
- straight channel flow field
- QUDT guidance
- http://qudt.org/vocab/unit/UNITLESS
Categorical characteristic identifying the arrangement and connectivity of flow channels in a flow field, such as parallel, serpentine, or interdigitated architecture.
Flow Field Rib Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FlowFieldRibWidth- Type
- Class, Characteristic
- altLabel
- rib width
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the width of flow field rib.
Flow-battery system
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FlowBatterySystem- Type
- Class, Matter
A battery system in which electroactive species are stored in flowing electrolytes external to the electrochemical cell stack.
Fluid-handling instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FluidHandlingInstrument- Type
- Class, Instrument
An instrument that pumps, dispenses, meters, regulates, or transfers a fluid during material preparation, measurement, or device operation.
Fluorescence Microscope
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FluorescenceMicroscope- Type
- Class, Instrument
An instrument corresponding to a fluorescence microscope and used in Fluorescence Microscopy Imaging.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001095 (fluorescence microscope)
Fluorescence microscopy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FluorescenceMicroscopyImaging- Type
- Class, Measurement
- altLabel
- Fluorescence Microscopy Imaging; fluorescence microscopy; fluorescent images
Imaging method used to assess QD uniformity and coffee-ring formation in dried droplets/patterns.
Mappings
- skos:narrowMatch
http://www.bioassayontology.org/bao#BAO_0000064 (total internal reflection fluorescence microscopy)
Fluorine Weight Percent In Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FluorineWeightPercentInCatalystLayer- Type
- Class, Characteristic
- altLabel
- F
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting eDS-reported normalized fluorine concentration in catalyst layer (wt.%); F attributed to PFSA/Nafion.
Formaldehyde
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Formaldehyde- Type
- Class, Matter
Reducing agent (formaldehyde solution) in electroless copper plating bath (Solution B).
Formic Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FormicAcid- Type
- Class, Matter
Additive used to control steric hindrance during ligand exchange.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_30751 (Formic acid)
Formulation process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FormulationProcess- Type
- Class, Manufacturing
A material-processing operation that combines constituents to obtain a mixture or dispersion with a specified composition.
Four Probe Resistance Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FourProbeResistanceMeasurement- Type
- Class, Measurement
- altLabel
- four-point probe; four-probe I–V measurement; four-probe setup
Four-probe current–voltage measurement of dry CL to estimate lateral electronic resistance.
Frame Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FrameRate- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A quantitative characteristic specifying the change in frame per stated unit of time or progression variable.
Free MSA Weight Percent Based On QD
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FreeMSAWeightPercentBasedOnQD- Type
- Class, Compatibility
- altLabel
- free MSA wt% (based on QD)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic that represents free msa weight percent based on qd for a material, component, process, measurement, or hydrogen-electrochemical system.
Free Radical Polymerization Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FreeRadicalPolymerizationProcess- Type
- Class, Manufacturing
- altLabel
- free radical polymerization
One-step grafting-from polymerization used to anchor ionomer/MIP on catalyst support.
Freeze Drier
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FreezeDrier- Type
- Class, Instrument
Freeze drier used for freeze-drying green parts.
Freeze Drying
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FreezeDrying- Type
- Class, Manufacturing
- altLabel
- FD; freeze-dried; sublimation drying
A manufacturing process for freeze drying using Printed Green Part with Freeze Drier and producing Printed Composite Structure.
Freeze Thaw Cycle Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FreezeThawCycleCount- Type
- Class, Characteristic
- altLabel
- freeze-thaw cycles
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A property denoting number of repeated freeze–thaw cycles applied during subzero durability test.
Freeze Thaw Cycling Durability Test
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FreezeThawCyclingDurabilityTest- Type
- Class, Process
- altLabel
- freeze–thaw cycles
A durability-testing process that repeatedly freezes and thaws a specimen or electrochemical assembly under specified water-content and thermal conditions and evaluates resulting changes in structure or performance.
Frequency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Frequency- Type
- Class, Characteristic
- altLabel
- characteristic frequency; f1; peak frequency
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency | http://qudt.org/vocab/unit/HZ
A frequency characteristic specifying the repetition rate or oscillation frequency associated with frequency.
Frequency characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FrequencyCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing frequency, frequency range, or periodic repetition rate.
Frequency Range
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FrequencyRange- Type
- Class, Characteristic
- altLabel
- f range; frequency scope
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency | http://qudt.org/vocab/unit/HZ
A frequency characteristic specifying frequency range under the conditions and reference basis stated with the record.
FTIR Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FTIRDataset- Type
- Class, Data
- altLabel
- FTIR spectra
Dataset of FTIR spectra versus UV exposure time and versus pyrolysis temperature.
Mappings
- skos:broadMatch
http://purl.obolibrary.org/obo/T4FS_0000347 (dataset) - skos:broadMatch
http://purl.org/spar/fabio/Dataset (dataset) - skos:broadMatch
http://semanticscience.org/resource/SIO_000089 (dataset)
FTIR Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FTIRInstrument- Type
- Class, Instrument
- altLabel
- Bruker FTIR analyzer
An instrument corresponding to a FTIR instrument and used in FTIR Spectroscopy Measurement.
FTIR Spectrometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FTIRSpectrometer- Type
- Class, Instrument
- altLabel
- FTIR (Nicolet iS5; Perkin Elmer 100 FT-IR spectrometer; Thermo Scientific Nicolet 6700 FTIR
FTIR spectrometer used for ATR–FTIR measurements of cross-link stability.
FTIR Spectroscopy Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FTIRSpectroscopyMeasurement- Type
- Class, Measurement
- altLabel
- FT-IR; FTIR spectra; IR spectroscopy
FT-IR used to characterize carboxylate coordination features of MSA-QDs.
FTIR Wavenumber Range
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FTIRWavenumberRange- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/WavenumberRange
A spectroscopic characteristic specifying ftir wavenumber range under the conditions and reference basis stated with the record.
FTO Glass Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FTOGlassSubstrate- Type
- Class, Matter
- altLabel
- FTO glass
A material entity corresponding to a FTO glass substrate and used as an input in Material Specification.
FU Ndoped Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FUNdopedCarbonCatalyst- Type
- Class, Matter
N-doped carbon catalyst made from furfural + urea using acid-treated halloysite template; yields rod-like morphology.
Fuel Cell Aging Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FuelCellAgingDataset- Type
- Class, Data
- altLabel
- aging data; experimental aging data; measurement data
Time-series dataset collected during aging tests (voltage, current, temperature, etc.).
Fuel Cell Operation Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FuelCellOperationTime- Type
- Class, Characteristic
- altLabel
- continuous fuel cell operation; operating time; operation time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with fuel cell operation.
Fuel Cell Polarization Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FuelCellPolarizationDataset- Type
- Class, Data
- altLabel
- i–PD data; i–V curves dataset; i–V data
A dataset containing fuel cell polarization data generated by MEAPolarization and Fuel Cell Polarization Measurement.
Fuel Cell Polarization Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FuelCellPolarizationMeasurement- Type
- Class, Measurement
- altLabel
- fuel cell performance test; polarization measurement; single cell polarization curve
Canonical measurement term for PEMFC single-cell polarization and IV-curve measurement under defined gas-side, thermal, humidity, and pressure operating conditions, used to derive current-density, voltage, power-density, and related fuel-cell performance outputs.
Fuel Cell Test Cell
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FuelCellTestCell- Type
- Class, Instrument
- altLabel
- Baltic FuelCells quickConnect® test cell 'high amp'; Baltic ISE qCf Liquid Cooling high amp zero gradient test cell; Baltic ISE qCf test cell
Single-cell hardware that houses a membrane electrode assembly together with sealing and flow-distribution components during electrochemical testing.
Fuel Cell Test Station
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FuelCellTestStation- Type
- Class, Instrument
- altLabel
- Scribner 850e Fuel Cell Test System; single-cell test station; single-cell test system
An integrated fuel-cell test station that contains or coordinates the test cell, gas humidification, flow control, thermal control, and electrical load during single-cell operation.
Fuel-cell system
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FuelCellSystem- Type
- Class, Matter
An electrochemical system that converts the chemical energy of a continuously supplied fuel and oxidant into electrical energy.
Fumed Silica
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FumedSilica- Type
- Class, Matter
- altLabel
- amorphous fumed silica; fumed silica template/support; silica template
Amorphous fumed silica used as a templating carrier during CoTMPP catalyst preparation (later etched out).
Furfural
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Furfural- Type
- Class, Matter
Carbon precursor used (with urea N source) to form rod-like N-doped carbon catalyst FU.
Furfural Conversion
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FurfuralConversion- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/FractionPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting furfural conversion and determined in Furfural Hydrogenation Reaction Measurement.
Furfural Hydrogenation Reaction Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FurfuralHydrogenationReactionMeasurement- Type
- Class, Measurement
- altLabel
- furfural hydrogenation test
Batch autoclave catalytic test (aqueous phase) reporting furfural conversion and product selectivity under H2.
Furfuryl Alcohol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FurfurylAlcohol- Type
- Class, Matter
Primary hydrogenation product of furfural.
Furfuryl Alcohol Selectivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#FurfurylAlcoholSelectivity- Type
- Class, Characteristic
- altLabel
- selectivity to furfuryl alcohol
- QUDT guidance
- http://qudt.org/vocab/quantitykind/FractionPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting selectivity to furfuryl alcohol among products (percent).
Galvanostatic Activation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GalvanostaticActivation- Type
- Class, Process
- altLabel
- constant current activation
An electrochemical conditioning process that operates an electrode or cell at a specified constant current or current density to activate and stabilize its response.
Galvanostatic Charge Discharge Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GalvanostaticChargeDischargeMeasurement- Type
- Class, Measurement
- altLabel
- charge/discharge cycling; constant current charge/discharge; galvanic charge/discharge
A measurement process that uses galvanostatic charge discharge measurement to determine Coulombic Efficiency, Energy Efficiency, and Ohmic Resistance using Battery Analyzer, Electrochemical Workstation, and Ag/AgCl and generating Charge Discharge Dataset.
Gas Adsorption Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasAdsorptionAnalyzer- Type
- Class, Instrument
- altLabel
- Micromeritics nitrogen adsorption analyser
Instrument used for nitrogen physisorption (BET surface area, pore volume/size).
Gas Chromatograph
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasChromatograph- Type
- Class, Instrument
Gas chromatograph (GC) used to analyze outlet gases during DRM testing.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/equipment#AFE_0000024 (gas chromatograph) - skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0002478 (gas chromatograph)
Gas Chromatograph FID
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasChromatographFID- Type
- Class, Instrument
- altLabel
- GC-FID
Gas chromatograph with flame ionization detector used to quantify ester content (EN14103).
Gas chromatography
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasChromatographyMeasurement- Type
- Class, Measurement
- altLabel
- GC; Gas Chromatography Measurement; gas chromatography (FID)
A chromatographic measurement that separates volatilized analytes in a gaseous mobile phase and records their detector responses to determine component identities or amounts.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/process#AFP_0000310 (gas chromatography) - skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001002 (gas chromatography) - skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000130 (gas chromatography) - skos:exactMatch
https://w3id.org/pmd/co/PMD_0000656 (gas chromatography process)
Gas Chromatography Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasChromatographyInstrument- Type
- Class, Instrument
Gas chromatography instrument used to determine fatty acid compositions (Section 3.1).
Gas Chromatography Mass Spectrometry Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasChromatographyMassSpectrometryMeasurement- Type
- Class, Measurement
- altLabel
- GC-MS; mass spectrometry
GC-MS used to identify intermediate products and m/z peaks during RhB degradation.
Gas Composition
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasComposition- Type
- Class, Characteristic
- altLabel
- H2/N2; H2/O2; H2/air
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Categorical | http://qudt.org/vocab/unit/UNITLESS
A composition characteristic specifying gas composition under the conditions and reference basis stated with the record.
Gas Crossover Method
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasCrossoverMethod- Type
- Class, Measurement
A measurement that quantifies transport of a specified gas across a membrane or assembly using a detected flux, downstream concentration, or electrochemical response.
Gas Diffusion Electrode Method
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasDiffusionElectrodeMethod- Type
- Class, Manufacturing
- altLabel
- GDE method
MEA fabrication route where catalyst layer is prepared on GDL (forming GDE) then hot-pressed with PEM.
Gas Diffusion Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasDiffusionLayer- Type
- Class, Matter
- altLabel
- GDL
A porous, electronically conducting backing layer that supports an electrode reaction layer, enables gaseous reactant or product transport, and provides pathways for heat and electrical current.
Gas Diffusion Layer Porosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasDiffusionLayerPorosity- Type
- Class, Characteristic
- altLabel
- EGDL; GDL porosity; porosity of GDL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Porosity
A morphological characteristic describing gas diffusion layer porosity under the conditions and reference basis stated with the record.
Gas Diffusion Layer Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasDiffusionLayerThickness- Type
- Class, Characteristic
- altLabel
- GDL thickness; GDL thickness Ib; l_b
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A thickness characteristic representing the distance between the opposing bounding surfaces of a gas diffusion layer.
Gas Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasFlowRate- Type
- Class, Characteristic
- altLabel
- L/min; flow rate; mL/min
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumetricFlowRate
A transport characteristic specifying the quantity of gas passing a reference boundary per unit time.
Gas Hourly Space Velocity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasHourlySpaceVelocity- Type
- Class, Compatibility
- altLabel
- GHSV; space velocity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ReciprocalTime
A quantitative characteristic that represents gas hourly space velocity for a material, component, process, measurement, or hydrogen-electrochemical system.
Gas Humidification Unit
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasHumidificationUnit- Type
- Class, Instrument
- altLabel
- gas humidification; humidification unit; humidified gases
An instrument corresponding to a gas humidification unit and used in Oxygen Gain/Loss Measurement, O2–N2 Switching Measurement, and MEAPolarization.
Gas Permeability Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasPermeabilityMeasurement- Type
- Class, Measurement
A measurement process that uses gas permeability measurement to determine Hydrogen Permeability and Oxygen Permeability.
Gas Sorption Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasSorptionAnalyzer- Type
- Class, Instrument
- altLabel
- ASAP 2020 gas sorption analyzer; TI-SA+ vapor sorption analyzer; water vapor sorption analyzer (TA Instruments)
An instrument corresponding to a gas sorption analyzer and used in Nitrogen Physisorption Measurement, Water Vapor Adsorption Measurement, and Octane Adsorption BET Measurement.
Gas Volumetric Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasVolumetricFlowRate- Type
- Class, Characteristic
- altLabel
- cc/min; gas flow rate; gas flow rate (mL/min)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumetricFlowRate
http://qudt.org/vocab/quantitykind/VolumetricFlowRate
A transport characteristic specifying the quantity of gas volumetric passing a reference boundary per unit time.
Gas-diffusion-layer component
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasDiffusionLayerComponent- Type
- Class, Matter
A porous electrode component that distributes reactant gas, conducts electrons, and manages water between a flow field and a catalyst layer.
Gasket
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Gasket- Type
- Class, Matter
- altLabel
- sealing gasket
A material entity corresponding to a gasket used to seal and compress single-cell fuel-cell hardware during membrane electrode assembly testing.
Gasket Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GasketThickness- Type
- Class, Characteristic
- altLabel
- PTFE gaskets
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/MicroM
A geometric characteristic specifying the distance between the opposing bounding surfaces of gasket.
GCMS Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GCMSInstrument- Type
- Class, Instrument
GC-MS instrument used to analyze degradation intermediates.
GDE Fixture
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GDEFixture- Type
- Class, Matter
A fixture that holds a gas-diffusion electrode in a defined test geometry and provides the required gas access, electrolyte contact, sealing, and electrical connection.
GDE Half Cell Setup
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GDEHalfCellSetup- Type
- Class, Instrument
- altLabel
- GDE half-cell; GDE setup
Gas diffusion electrode half-cell test fixture enabling high-current ORR testing with gas feed to electrode and liquid electrolyte contact (per ref. [22]).
GDL Type
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GDLType- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/unit/UNITLESS
A categorical characteristic identifying gdl type under the conditions and reference basis stated with the record.
Gel Permeation Chromatography Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GelPermeationChromatographyInstrument- Type
- Class, Instrument
- altLabel
- GPC
Instrument for GPC measurements; not found in ontology.
Gel permeation chromatography process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GelPermeationChromatographyMeasurement- Type
- Class, Measurement
- altLabel
- GPC; Gel Permeation Chromatography Measurement; gel permeation chromatography
GPC used to determine PBI molecular weight distribution; not found in ontology.
Gel Point Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GelPointTime- Type
- Class, Characteristic
- altLabel
- G′=G″; intersection point time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
Elapsed time from the start of the specified curing protocol to the operational gelation criterion; for the stated rheological protocol, the criterion is the crossover at which storage modulus G′ equals loss modulus G″ at the selected oscillation frequency.
Geodesic Tortuosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GeodesicTortuosity- Type
- Class, Characteristic
- altLabel
- mean geodesic tortuosity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting geodesic tortuosity derived from shortest-path transport analysis on reconstructed porous microstructures in FIBSEM Tomography Measurement.
Geometric Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GeometricArea_2- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
A scientific concept representing Geometric Area in the H₂KG domain model.
Geometric Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GeometricArea- Type
- Class, Characteristic
- altLabel
- active area; active area (geometric); printed area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
A geometric characteristic specifying the area associated with geometric.
Mappings
- skos:broadMatch
http://emmo.info/emmo#EMMO_96f39f77_44dc_491b_8fa7_30d887fe0890 (Area) - skos:broadMatch
http://semanticscience.org/resource/SIO_000045 (area) - skos:broadMatch
https://saref.etsi.org/saref4inma/Area (Area)
Geometric characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GeometricCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing size, shape, position, orientation, or spatial extent.
- subclasses
- Adsorbed Aggregate Lateral Size, Aggregate Aspect Ratio, Air Diffusion Layer Thickness Fraction In MCL, Astrocyte Cell Area, Average Chopped Fiber Length, Average Water Droplet Area, Carbon Black Aggregate Anisotropy Ratio, Carbon Shell Thickness, Catalyst Particle Volume, Cell Active Area, Cell Length, Cell Width, Channel To Spacer Area Ratio, Coating Width, Component Volume, Crack Length, Crack Width, Crack Width D 50 CWD, Crack Width D 50 MIP, Crack Width Max, Critical Crack Thickness, Cut Thickness, Debye Length, Detection Area, DLS Scattering Angle, Drop Spacing, Droplet Volume, Electrode Side Length, Electrospinning Needle To Collector Distance, Ethanol Volume, Fiber Orientation Angle Std Dev, Flow Channel Width, Flow Field Rib Width, Gasket Thickness, Geometric Area, Graphene Flake Lateral Size, Graphene Flake Thickness, Graphitic Plane Orientation Order Parameter, Height Step Size, Hydrogen Peroxide Volume, Illumination Beam Diameter, Image Width Pixels, Ink Batch Volume, Ink Drop Volume, Ink Solvent Volume, Ink Water Volume, Interlayer Spacing, Interplanar Lattice Spacing, Interplanar Spacing, Ionomer Aggregate Size Ratio, Ionomer Inter Particle Distance, Lamp To Sample Distance, Lattice Structure Size, Layer thickness, Linear Shrinkage Length, Linear Shrinkage Width, Macropore Volume Per Mass, Mean Fiber Orientation Angle, Membrane Area Expansion Percent, Membrane Volume Expansion Percent, Mesopore Volume, Micropore Volume, Microscopy Measured Area, Nozzle To Substrate Distance, Oxygen Mean Free Path Length, Particle Length, Particle Width, Pixel Size, Printed Area, Printed Line Width, Printed Trace Width, Proton Conduct Layer Thickness Fraction In MCL, Pt Crystal Thickness, Reaction Area Position In Catalyst Layer, Reaction Layer Thickness Fraction In MCL, Removed Strip Width, Sample Detector Distance, Scattering Angle, Screen Mesh Thickness, Screen Volume, Segment Active Area, Snap Off Distance, Solution Volume, Spacer Thickness, Spanning Distance, Spray Angle, Spray Distance, Strip Spacing, Strut Thickness, Surface To Volume Ratio, Syringe Volume, Target Substrate Distance, Voxel Size, Water Drop Volume, Working Distance, XPS Analysis Area, XPS Take Off Angle, XRD Step Size
Geopolymer Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GeopolymerInk- Type
- Class, Matter
- altLabel
- geopolymer slurry; paste (ink)
A material entity corresponding to a geopolymer ink and used as an input in Direct Ink Writing.
Geopolymer Lattice Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GeopolymerLatticeCatalyst- Type
- Class, Matter
- altLabel
- geopolymer lattice; structured catalyst
3D printed (DIW) geopolymer lattice body used as heterogeneous alkaline catalyst for biodiesel transesterification.
Geopolymer Powder Filler
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GeopolymerPowderFiller- Type
- Class, Matter
- altLabel
- filler particulate; geopolymer powder
Ground geopolymer powder of same composition used as filler to tune rheology/printability.
Glassy Carbon Disk Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GlassyCarbonDiskElectrode- Type
- Class, Matter
- altLabel
- glassy carbon (GC) disk electrode; glassy carbon disk; glassy carbon electrode
A disk-shaped electrode made of glassy carbon, used as an electrochemically conducting surface or as a substrate for a deposited catalyst layer.
Gloss
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Gloss- Type
- Class, Characteristic
- altLabel
- GU
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting gloss and determined in Gloss Measurement.
Gloss Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GlossMeasurement- Type
- Class, Measurement
- altLabel
- Gloss; gloss meter
A measurement process that uses gloss measurement to determine Gloss using Gloss Meter.
Gloss Meter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GlossMeter- Type
- Class, Instrument
- altLabel
- BIUGED BGD 514 gloss meter (60°)
Gloss meter instrument used to measure gloss (60°) of printed films (Section 2.4.1.6).
Glucose
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Glucose- Type
- Class, Matter
- altLabel
- D(+)-glucose
Glucose (C₆H₁₂O₆), a six-carbon aldose monosaccharide.
Glucose Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GlucoseConcentration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarConcentration
A composition characteristic specifying the amount of glucose per stated quantity of mixture or solution.
Glycerol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Glycerol- Type
- Class, Matter
- altLabel
- d8-glycerol; glycerin; glycerol additive
High-boiling solvent used as main ink solvent in decal-transfer catalyst ink.
Glycidyl Methacrylate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GlycidylMethacrylate- Type
- Class, Matter
Monomer component used in DLP elastomer and DIW photocurable ink.
Gold Nanoparticle Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GoldNanoparticleInk- Type
- Class, Matter
- altLabel
- AuNP ink; gold ink
A material entity corresponding to a gold nanoparticle ink and used as an input in Inkjet Printing Process.
Gold Plated Probes
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GoldPlatedProbes- Type
- Class, Instrument
An instrument corresponding to a gold plated probes and used in Through Plane Electronic Conductivity Measurement.
Grain Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GrainSize- Type
- Class, Compatibility
- altLabel
- La; Lc; crystallite size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting characteristic grain/crystallite size estimated from XRD using Scherrer formula (reported ~5 nm for β-SiC at 1600°C).
Graphene Few Layer Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GrapheneFewLayerFraction- Type
- Class, Characteristic
- altLabel
- few-layer fraction; few-layer fraction (2–10 layers)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction of analyzed flakes that are few-layer graphene.
Graphene Flake Lateral Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GrapheneFlakeLateralSize- Type
- Class, Characteristic
- altLabel
- flake size; lateral size; lateral size (µm)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting lateral size of graphene flakes (reported range 0.5–15 µm for sawdust-derived graphene).
Graphene Flake Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GrapheneFlakeThickness- Type
- Class, Characteristic
- altLabel
- monolayer thickness
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting thickness of individual graphene flakes from AFM (typically ~1 nm for monolayer).
Graphene Flake Yield
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GrapheneFlakeYield- Type
- Class, Characteristic
- altLabel
- yield (wt%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting mass yield of biomass-derived graphene flakes from biomass precursor.
Graphene Layer Step Height
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GrapheneLayerStepHeight- Type
- Class, Characteristic
- altLabel
- step height
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting aFM step height per graphene layer (approx. 0.37 nm).
Graphene Monolayer Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GrapheneMonolayerFraction- Type
- Class, Characteristic
- altLabel
- monolayer fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction of analyzed flakes that are monolayer graphene.
Graphene Nanoplatelets
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GrapheneNanoplatelets- Type
- Class, Matter
- altLabel
- Cheap Tubes Inc. graphene nanoplatelets; few-layer graphene; graphene flakes
Carbon catalyst used in catalyst-coated membrane electrodes; compared against Vulcan XC-72R carbon black.
Graphene Oxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GrapheneOxide- Type
- Class, Matter
- altLabel
- GO
Graphene oxide flakes used as rheology modifier and graphitizable precursor in the printing ink; not found in ontology.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_132889 (graphene oxide)
Graphene Oxide To Lignin Mass Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GrapheneOxideToLigninMassRatio- Type
- Class, Characteristic
- altLabel
- GO/lignin ratio; GO:lignin; initial GO/lignin ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A dimensionless characteristic expressing the stated ratio identified as Graphene Oxide To Lignin Mass Ratio.
Graphite Bipolar Plate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiteBipolarPlate- Type
- Class, Matter
- altLabel
- flow field plates; graphite plates
Graphite plates with flow fields forming single cell hardware.
Graphite Ink Suspension
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiteInkSuspension- Type
- Class, Matter
- altLabel
- graphite/water/ethanol suspension
A material entity corresponding to a graphite ink suspension and used as an input in Rheology Measurement and Laser Diffraction Scattering Particle Size Measurement.
Graphite Oxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiteOxide- Type
- Class, Matter
An oxidized layered graphite material bearing oxygen-containing functional groups and retaining a stacked-sheet structure.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_132888 (graphite oxide)
Graphite Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphitePowder- Type
- Class, Matter
- altLabel
- Natural flake graphite; synthetic graphite powder
Graphite powder used as conductive component of the conductive ink.
Graphite Rod Counter Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiteRodCounterElectrode- Type
- Class, Matter
- altLabel
- graphite rod counter
A rod-shaped graphite electrode used to carry the balancing current in an electrochemical cell.
Graphite Sheet
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiteSheet- Type
- Class, Matter
- altLabel
- graphite surface; graphitized carbon sheet
A material entity corresponding to a graphite sheet and used as an input in Ionomer Coating Simulation.
Graphite Sheet With Carboxylate Groups
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiteSheetWithCarboxylateGroups- Type
- Class, Matter
- altLabel
- COO− groups; graphite sheet with 64 ionized carboxylate groups
A material entity corresponding to a graphite sheet with carboxylate groups and used as an input in Ionomer Coating Simulation.
Graphitic Carbon Fraction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiticCarbonFractionPercent- Type
- Class, Compatibility
- altLabel
- Cgr
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting percent contribution of graphitic/aliphatic carbon component in C 1s XPS deconvolution.
Graphitic Crystallite Size La
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiticCrystalliteSizeLa- Type
- Class, Characteristic
- altLabel
- La; crystallite size La; in-plane crystallite size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting graphitic crystallite size la and determined in Raman Spectroscopy Measurement.
Graphitic Crystallite Stacking Size Lc
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiticCrystalliteStackingSizeLc- Type
- Class, Characteristic
- altLabel
- Lc; crystallite stacking size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting graphitic crystallite stacking size lc and determined in X Ray Diffraction Measurement.
Graphitic Nitrogen Fraction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiticNitrogenFractionPercent- Type
- Class, Characteristic
- altLabel
- Ngr; graphitic N
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting percent of N 1s assigned to graphitic nitrogen (XPS deconvolution).
Graphitic Plane Orientation Order Parameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiticPlaneOrientationOrderParameter- Type
- Class, Characteristic
- altLabel
- order parameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A dimensionless orientational characteristic quantifying the degree of preferred alignment of graphitic planes.
Graphitic Planes Per Crystallite
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GraphiticPlanesPerCrystallite- Type
- Class, Characteristic
- altLabel
- Lc/d(002); planes per crystallite
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting graphitic planes per crystallite and determined in X Ray Diffraction Measurement.
Gravimetric Specific Capacitance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GravimetricSpecificCapacitance- Type
- Class, Characteristic
- altLabel
- capacitance (F g^-1); specific capacitance; specific capacitance (F g−1)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/CapacitancePerMass
A property denoting gravimetric specific capacitance (F/g) measured for OP-AC in 0.1 M H2SO4 from CV curves; distinct from area-specific double-layer capacitance.
Gravity Feed Airbrush
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GravityFeedAirbrush- Type
- Class, Instrument
- altLabel
- gravity-fed airbrush
Specific airbrush feed mechanism used for spray coating; compared against suction-feed type.
Gravure Coating
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GravureCoating- Type
- Class, Manufacturing
Roll-to-roll printing/coating method for catalyst inks; discussed in context of scalable manufacturing.
Grid LSTM Model
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GridLSTMModel- Type
- Class, ModelArtifact
- altLabel
- Grid LSTM
A neural-network model that arranges long short-term memory cells in a multidimensional grid to propagate hidden and memory states across specified dimensions.
GU Ndoped Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GUNdopedCarbonCatalyst- Type
- Class, Matter
N-doped carbon catalyst made from glucose + urea using halloysite template; yields flaky morphology after template removal.
Guinier Porod Dimension Variable
- IRI
https://w3id.org/h2kg/hydrogen-ontology#GuinierPorodDimensionVariable- Type
- Class, Characteristic
- altLabel
- dimension variable; dimension variable (Guinier–Porod)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting dimension/shape variable from Guinier–Porod model fitting indicating aggregate dimensionality (globular vs rodlike); reported ~0.01.
H 2 Desorption Peak Integral Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#H2DesorptionPeakIntegralCurrentDensity- Type
- Class, Characteristic
- altLabel
- H2 desorption peak area; H2 desorption peak integral
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ChargeDensityProxy
Potential integral of the baseline-corrected current density assigned to oxidative desorption of adsorbed hydrogen over a specified voltammetric peak, calculated as the integral of j(E) with respect to electrode potential E.
H 2 O Al 2 O 3 Molar Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#H2OAl2O3MolarRatio- Type
- Class, Characteristic
- altLabel
- H2O/Al203; H2O/Al2O3
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarRatio
A dimensionless characteristic expressing the stated ratio identified as H 2 O Al 2 O 3 Molar Ratio.
Half Wave Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HalfWavePotential- Type
- Class, Characteristic
- altLabel
- E1/2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
A property denoting potential at which current reaches half of limiting value in ORR LSV (RDE).
Half Wave Potential Shift After ADT
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HalfWavePotentialShiftAfterADT- Type
- Class, Characteristic
- altLabel
- E1/2 shift after 3000 cycles; half-wave potential shift; negative shift in half-wave potentials
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotentialDifference | http://qudt.org/vocab/unit/MilliV
A property denoting change in HalfWavePotential after accelerated durability test (ADT) potential cycling; reported here as mV shift.
Half Wave Potential Shift Relative To Nafion
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HalfWavePotentialShiftRelativeToNafion- Type
- Class, Compatibility
- altLabel
- E1/2 shift vs Nafion; half-wave potential shift; positive shift of half-wave potential
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotentialDifference | http://qudt.org/vocab/unit/MilliV
A property denoting half wave potential shift relative to nafion and determined in Accelerated Stress Test Voltage Cycling.
Hall Effect Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HallEffectMeasurement- Type
- Class, Measurement
- altLabel
- Hall measurement
A measurement process that uses hall effect measurement to determine Hall Mobility, In Plane Electronic Conductivity, and Lateral Electronic Resistance using Hall Measurement System.
Hall Measurement System
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HallMeasurementSystem- Type
- Class, Instrument
- altLabel
- Lake Shore 8400 Hall system
System used for Hall mobility, conductivity, and sheet resistance testing.
Hall Mobility
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HallMobility- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mobility
A property denoting carrier Hall mobility measured by Hall system on graphene film/pellet.
Halloysite Nanoclay
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HalloysiteNanoclay- Type
- Class, Matter
- altLabel
- halloysite template; tubular halloysite
Natural aluminosilicate clay mineral (Al2Si2O5(OH)4·2H2O) used as a template to direct porous carbon morphology.
Hamaker Constant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HamakerConstant- Type
- Class, Characteristic
- altLabel
- Hamaker coefficient; Hamaker coefficient A
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Energy
A property denoting hamaker constant used for van der Waals interaction energy in DLVO-type model.
Hansen Solubility Parameter Dispersion
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HansenSolubilityParameterDispersion- Type
- Class, Characteristic
- altLabel
- δD
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SolubilityParameter
A cohesive-energy-density characteristic representing the dispersion-force contribution to a Hansen solubility parameter.
Hansen Solubility Parameter Hydrogen Bonding
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HansenSolubilityParameterHydrogenBonding- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SolubilityParameter
A cohesive-energy-density characteristic representing the hydrogen-bonding contribution to a Hansen solubility parameter.
Hansen Solubility Parameter Polar
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HansenSolubilityParameterPolar- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SolubilityParameter
A cohesive-energy-density characteristic representing the polar-interaction contribution to a Hansen solubility parameter.
Heat Gun
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HeatGun- Type
- Class, Instrument
Used for thermal curing/sintering of conductive ink layers (~120°C).
Heated Vacuum Table
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HeatedVacuumTable- Type
- Class, Instrument
- altLabel
- vacuum table assembly
Custom heated vacuum hold-down stage (90°C) to keep PEM flat and accelerate solvent evaporation during ink deposition.
Heating Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HeatingRate- Type
- Class, Characteristic
- altLabel
- heating rate (°C/min); ramp rate; temperature ramp rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/TemperatureChangeRate
A quantitative characteristic specifying the change in heating per stated unit of time or progression variable.
Height Step Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HeightStepSize- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying height step size under the conditions and reference basis stated with the record.
Helium
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Helium- Type
- Class, Matter
- altLabel
- helium gas
A material entity corresponding to a helium.
Mappings
- skos:narrowMatch
http://purl.allotrope.org/ontologies/material#AFM_0001115 (helium gas)
Helium Pycnometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HeliumPycnometer- Type
- Class, Instrument
- altLabel
- gas pycnometer; helium gas pycnometer
A gas-displacement instrument that uses helium pressure–volume measurements to determine the sample volume inaccessible to helium, from which skeletal density is calculated using sample mass.
Henrys Coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HenrysCoefficient- Type
- Class, Compatibility
- altLabel
- Henry's coefi cient
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A quantitative characteristic that represents henrys coefficient for a material, component, process, measurement, or hydrogen-electrochemical system.
Heptanol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Heptanol- Type
- Class, Matter
Low-vapor-pressure alcohol additive used to adjust ink surface tension (5 wt%).
Hexane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Hexane- Type
- Class, Matter
- altLabel
- n-hexane
Solvent listed for surface tension comparison.
Hexylamine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Hexylamine- Type
- Class, Matter
Hexylamine solvent used in mixed-solvent CQD inks.
Hg Hg O To RHE Offset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HgHgOToRHEOffset- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
A quantitative characteristic specifying hg hg o to rhe offset under the conditions and reference basis stated with the record.
Hidden Neuron Number
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HiddenNeuronNumber- Type
- Class, Characteristic
- altLabel
- L=10; hidden neurons
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying the number assigned to hidden neuron.
High Frequency Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HighFrequencyResistance- Type
- Class, Characteristic
- altLabel
- HFR; ohmic resistance; single cell resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance
Ohmic resistance estimated from the high-frequency real-axis intercept of an electrochemical impedance spectrum of the specified cell or electrode assembly.
High Pressure Homogenization
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HighPressureHomogenization- Type
- Class, Manufacturing
- altLabel
- high pressure homogenizer; homogenizer
A dispersion process that drives a liquid formulation through a high-pressure flow restriction to apply intense shear, extension, impact, or cavitation and reduce compositional or particle-size heterogeneity.
High Pressure Homogenizer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HighPressureHomogenizer- Type
- Class, Instrument
An instrument that forces a fluid formulation through a restricted passage or interaction chamber under high pressure to disperse droplets or agglomerates and homogenize the formulation.
High Shear Mixer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HighShearMixer- Type
- Class, Instrument
- altLabel
- Turrax mixer T25; mechanical mixer; rotor-stator mixer
A mixing instrument that applies high local shear rates to disperse and homogenize constituents, commonly using an impeller or rotor–stator assembly.
High Shear Mixing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HighShearMixing- Type
- Class, Manufacturing
- altLabel
- high shear mixer; mechanical mixing
A mechanical mixing process that applies high local shear rates to distribute constituents and disrupt droplets or particle agglomerates in a formulation.
High Speed Video Camera
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HighSpeedVideoCamera- Type
- Class, Instrument
High-speed camera used to capture pillar formation.
High Speed Video Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HighSpeedVideoDataset- Type
- Class, Data
- altLabel
- high-speed video frames
Dataset of recorded high-speed video frames during printing.
High Speed Video Imaging Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HighSpeedVideoImagingMeasurement- Type
- Class, Measurement
- altLabel
- high-speed video; real-time analysis via high-speed camera
High-speed video imaging of pillar formation dynamics during vertical printing.
High Temperature PEMFC
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HighTemperaturePEMFC- Type
- Class, Matter
- altLabel
- HT-PEMFC; high temperature polymer electrolyte fuel cell; high temperature polymer electrolyte membrane fuel cell
A proton-exchange-membrane fuel-cell system designed for operation above the conventional hydrated low-temperature PEMFC range, using an electrolyte membrane and components suitable for elevated-temperature operation.
High Voltage Power Supply
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HighVoltagePowerSupply- Type
- Class, Instrument
- altLabel
- high-voltage power supply (Glassman MJ30P0400-11)
An instrument corresponding to a high-voltage power supply and used in electrospray deposition and microelectrode water electrolyzer polarization measurement.
Hold Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HoldTime- Type
- Class, Characteristic
- altLabel
- hold at temperature; hot-press time; pressing time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with hold.
Hollow Carbon Sphere
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HollowCarbonSphere- Type
- Class, Matter
- altLabel
- HCS
Carbon support synthesized by hydrothermal process; used as support for PtRu.
Homogenization Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HomogenizationSpeed- Type
- Class, Characteristic
- altLabel
- homogenizer speed
- QUDT guidance
- http://qudt.org/vocab/quantitykind/RotationalSpeed
A rate characteristic specifying the speed associated with homogenization.
Homogenization Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HomogenizationTemperature- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with homogenization.
Homogenization Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HomogenizationTemperature_2- Type
- Class, Compatibility
- altLabel
- homogenization achieved
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermodynamicTemperature | http://qudt.org/vocab/unit/K
A that represents homogenization temperature for a material, component, process, measurement, or hydrogen-electrochemical system.
HOSPEEK 64
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HOSPEEK64- Type
- Class, Matter
- altLabel
- Na+HO-SPEEK-64
Hydroxylated sulfonated PEEK (DS~64%) in Na-salt form; used as cathode ionomer.
Hot Blower
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HotBlower- Type
- Class, Instrument
Gas hot blower used for heating capillary during in situ XRD.
Hot Plate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HotPlate- Type
- Class, Instrument
An instrument corresponding to a hot plate and used in Spray Coating.
Mappings
- skos:exactMatch
https://w3id.org/polymat/HotPlate (Hot plate)
Hot Press
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HotPress- Type
- Class, Instrument
- altLabel
- flat hot-press; flat-press; hot-press machine
An instrument corresponding to a hot press and used in MEAAssembly Process, Hot Pressing, and Decal Transfer.
Hot Press Force
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HotPressForce- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Force
A quantitative characteristic specifying hot press force under the conditions and reference basis stated with the record.
Hot Press Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HotPressPressure- Type
- Class, Characteristic
- altLabel
- hot press pressure/force per area; pressing pressure; transfer pressure
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
http://qudt.org/vocab/quantitykind/Pressure
A pressure characteristic specifying the pressure associated with hot press.
Hot Press Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HotPressTemperature- Type
- Class, Characteristic
- altLabel
- hot-pressing temperature; pressing temperature; transfer temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermodynamicTemperature | http://qudt.org/vocab/unit/DEG_C
http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with hot press.
Hot Press Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HotPressTime- Type
- Class, Characteristic
- altLabel
- hot-pressing time; pressing time; transfer time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with hot press.
Hot Pressing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HotPressing- Type
- Class, Manufacturing
- altLabel
- hot press; hot-pressed; pressed
Manufacturing step that laminates or transfers a catalyst layer onto a membrane or substrate under controlled temperature and pressure; it does not by itself denote final MEA assembly.
Humidifier Equilibration Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HumidifierEquilibrationTime- Type
- Class, Characteristic
- altLabel
- conditioning time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with humidifier equilibration.
Humidifier Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HumidifierTemperature- Type
- Class, Characteristic
- altLabel
- bubbler temperature; humidification temperature; humidification water bath temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with humidifier.
Humidity Sensor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HumiditySensor- Type
- Class, Instrument
- altLabel
- DHT22 humidity sensor
Humidity sensor used to monitor RH in measurement setups (±3% accuracy stated).
Humidity Sweep Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HumiditySweepMeasurement- Type
- Class, Measurement
- altLabel
- humidity response measurement; humidity sweeps; relative humidity sweeps
A measurement process that uses humidity sweep measurement to determine Cell Voltage using Fuel Cell Test Cell and Gas Humidification Unit.
Hybrid DLPDIW Printing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HybridDLPDIWPrinting- Type
- Class, Manufacturing
- altLabel
- hybrid 3D printing system; hybrid multi-material 3D printing
Integrated process combining DLP printing with DIW printing in a single platform/job.
Hydration Number Lambda
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrationNumberLambda- Type
- Class, Characteristic
- altLabel
- hydration number λ
- QUDT guidance
- http://qudt.org/vocab/quantitykind/HydrationNumber
Average number of water molecules per specified ion-exchange site in an ionomer, calculated as the amount of water divided by the amount of ion-exchange sites.
Hydrazine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Hydrazine- Type
- Class, Matter
- altLabel
- hydrazine hydrate
Fuel molecule (hydrazine/hydrazine hydrate) used in alkaline hydrazine fuel cell tests.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_18280 (Hydrazine)
Hydrazine Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrazineConcentration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarConcentration
A composition characteristic specifying the amount of hydrazine per stated quantity of mixture or solution.
Hydrocarbon Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrocarbonIonomer- Type
- Class, Matter
- altLabel
- HC ionomer; sulfonated hydrocarbon polymer
An ionomer based on a predominantly nonfluorinated organic polymer framework and containing covalently bound ionic or ionizable groups with associated counterions.
Hydrochloric Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrochloricAcid- Type
- Class, Matter
- altLabel
- concentrated hydrochloric acid
Acid catalyst for hydrolysis/condensation during sol-gel modification of MK with TMSPM.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_17883 (Hydrochloric acid)
Hydrochloric Acid Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrochloricAcidConcentration- Type
- Class, Characteristic
- altLabel
- HCl concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Concentration
A composition characteristic specifying the amount of hydrochloric acid per stated quantity of mixture or solution.
Hydrodynamic Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrodynamicDiameter- Type
- Class, Characteristic
- altLabel
- D_h; average aggregate diameter; hydrodynamic diameter (DLS)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
http://qudt.org/vocab/quantitykind/Length
A property denoting the hydrodynamic diameter of dispersed particles or aggregates as determined by dynamic light scattering.
Hydrodynamic Radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrodynamicRadius- Type
- Class, Characteristic
- altLabel
- R_h; hydrodynamic radius (DLS); hydrodynamic radius distribution
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
http://qudt.org/vocab/quantitykind/Length
A property denoting hydrodynamic radius of ionomer/catalyst aggregates measured by dynamic light scattering.
Hydrofluoric Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrofluoricAcid- Type
- Class, Matter
Hydrofluoric acid used to etch/remove silica template after pyrolysis.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_29241 (Hydrofluoric acid)
Hydrogen
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Hydrogen- Type
- Class, Matter
- altLabel
- hydrogen gas
A material entity corresponding to a hydrogen and used as an input in MEAPolarization, Cyclic Voltammetry, and Fuel Cell Polarization Measurement.
Mappings
- skos:exactMatch
https://openenergyplatform.org/ontology/oeo/OEO_00000220 (hydrogen) - skos:narrowMatch
http://purl.allotrope.org/ontologies/material#AFM_0001112 (hydrogen gas)
Hydrogen Bonding Energy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenBondingEnergy- Type
- Class, Characteristic
- altLabel
- EH-bonding; H-bonding energy
- QUDT guidance
- http://qudt.org/vocab/quantitykind/EnergyPerAmountOfSubstance
A property denoting computed hydrogen-bonding energy between polymer and phosphoric acid (DFT).
Hydrogen Crossover Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenCrossoverCurrentDensity- Type
- Class, Characteristic
- altLabel
- H2 crossover current density; crossover current density; hydrogen crossover limiting current
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity
A property denoting limiting current density measured by LSV under H2/N2 to quantify hydrogen crossover flux.
Hydrogen Monolayer Charge Density On Pt
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenMonolayerChargeDensityOnPt- Type
- Class, Characteristic
- altLabel
- charge required to reduce monolayer of protons on Pt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ChargePerArea
A density characteristic specifying hydrogen monolayer charge density on pt under the conditions and reference basis stated with the record.
Hydrogen Oxidation Charge Constant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenOxidationChargeConstant- Type
- Class, Characteristic
- altLabel
- Q
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricChargePerArea
Reference electric charge per unit true platinum surface area for oxidation of an adsorbed hydrogen monolayer under a specified electrochemical protocol.
Hydrogen Permeability
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenPermeability- Type
- Class, Characteristic
- altLabel
- H2 permeability; H₂ permeability
- QUDT guidance
- http://qudt.org/vocab/quantitykind/GasPermeability
A property denoting gas permeability of polymer film to H2 (Barrer).
Hydrogen Peroxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenPeroxide- Type
- Class, Matter
Hydrogen peroxide (H₂O₂), a reactive peroxide compound that can participate in oxidation–reduction and radical-generating reactions.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_16240 (hydrogen peroxide)
Hydrogen Peroxide Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenPeroxideVolume- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by hydrogen peroxide.
Hydrogen Pumping Activation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenPumpingActivation- Type
- Class, Process
- altLabel
- hydrogen pumping
An electrochemical conditioning process that oxidizes hydrogen at one electrode and reduces transported protons to hydrogen at the other under an externally imposed current or potential.
Hydrogen Purity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenPurity- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A quantitative characteristic specifying hydrogen purity under the conditions and reference basis stated with the record.
Hydrogen Reduction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenReduction- Type
- Class, Manufacturing
- altLabel
- catalyst reduction; hydrogen co-reduction; reduced in situ by hydrogen
In-situ H2 reduction step prior to DRM testing (e.g., 850 °C, 10% H2/Ar).
Hydrogen Uptake Per Furfural
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenUptakePerFurfural- Type
- Class, Characteristic
- altLabel
- absorbed hydrogen (mol H2/mol furfural); mol H2/mol furfural
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarRatio
A property denoting stoichiometric H2 consumed per mol furfural during reaction (from flow-meter normalization).
Hydrogen Volumetric Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrogenVolumetricFlowRate- Type
- Class, Characteristic
- altLabel
- flow rate; hydrogen flow; hydrogen flow rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumetricFlowRate
A transport characteristic specifying the quantity of hydrogen volumetric passing a reference boundary per unit time.
Hydroiodic Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydroiodicAcid- Type
- Class, Matter
Acid additive reported to assist solution-phase ligand exchange.
Hydrolysis Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrolysisRate- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LengthPerTime
A property denoting hydrolysis rate through membrane during conversion of sulfonyl fluoride to sulfonic acid groups.
Hydrolysis Rate Slowdown Factor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrolysisRateSlowdownFactor- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A quantitative characteristic that represents hydrolysis rate slowdown factor for a material, component, process, measurement, or hydrogen-electrochemical system.
Hydrophilic Catalyst Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrophilicCatalystInk- Type
- Class, Matter
- altLabel
- Pt–C/Nafion catalyst ink solution; catalyst ink solutions; ink with Nafion
A material entity corresponding to a hydrophilic catalyst ink and used as an input in Spray Coating.
Hydrophobic Catalyst Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrophobicCatalystInk- Type
- Class, Matter
A catalyst-containing liquid formulation whose dispersed catalyst, support, or binder phase has low affinity for water.
Hydrothermal Synthesis Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#HydrothermalSynthesisProcess- Type
- Class, Manufacturing
Hydrothermal synthesis used to prepare MoS2 nanosheets and as part of hybrid synthesis.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001377 (hydrothermal synthesis)
I 2 Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#I2Ionomer- Type
- Class, Matter
Acta I2, a commercial anion-exchange ionomer used as a binder in alkaline-electrode catalyst formulations.
IC-SEM Imaging Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ICSEMImagingMeasurement- Type
- Class, Measurement
- altLabel
- IC-SEM; ion-cut SEM; ion-cut scanning electron microscopy
A measurement process that uses ion-cut scanning electron microscopy to characterize membrane-electrode-assembly cross sections and determine membrane-electrode-assembly thickness, gas diffusion layer thickness, and total porosity while generating SEM image and microstructure datasets.
IC-SEM Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ICSEMInstrument- Type
- Class, Instrument
- altLabel
- cross-section polisher SEM setup; ion-cut SEM instrument
An instrument configuration for ion-cut scanning electron microscopy that combines ion-beam cross-section preparation with SEM imaging for membrane-electrode-assembly and porous electrode characterization.
ICP Elemental Analysis Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ICPElementalAnalysisMeasurement- Type
- Class, Measurement
- altLabel
- ICP; ICP elemental analysis; ICP measurement
ICP elemental analysis used to quantify Ni content.
ICP Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ICPInstrument- Type
- Class, Instrument
- altLabel
- ICP
Instrument for inductively coupled plasma elemental analysis.
ICPAES Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ICPAESInstrument- Type
- Class, Instrument
- altLabel
- ICP instrument; ICP-AES
Inductively coupled plasma atomic emission spectrometer used to quantify Pt for loading determination.
Ideal hydrophilic ionomer contact angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IdealHydrophilicIonomerContactAngle- Type
- Class, Characteristic
- notation
- thetaHI
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle | http://qudt.org/vocab/unit/DEG | Value-free QUDT guidance for Ideal hydrophilic ionomer contact angle; the curated source reports [deg].
Limiting water contact angle of an ideally hydrophilic aligned ionomer surface used as the hydrophilic endpoint of the model wetting relation.
Ideal hydrophobic ionomer contact angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IdealHydrophobicIonomerContactAngle- Type
- Class, Characteristic
- notation
- thetaHO
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle | http://qudt.org/vocab/unit/DEG | Value-free QUDT guidance for Ideal hydrophobic ionomer contact angle; the curated source reports [deg].
Limiting water contact angle of an ideally hydrophobic aligned ionomer surface used as the hydrophobic endpoint of the model wetting relation.
Ilastik Software
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IlastikSoftware- Type
- Class, SoftwareArtifact
- altLabel
- Ilastik
Interactive image-analysis software that uses user annotations and machine-learning workflows for image classification, segmentation, counting, or tracking.
Illumination Beam Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IlluminationBeamDiameter- Type
- Class, Characteristic
- altLabel
- beam diameter; light beam diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of illumination beam.
Image Analysis Pore Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImageAnalysisPoreMeasurement- Type
- Class, Process
- altLabel
- ImageJ pore size analysis; fracture surface pore measurement
An image analysis that identifies pores in micrographs or reconstructed images and quantifies their size, shape, area or volume fraction, or other stated pore descriptors.
Image dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImageDataset- Type
- Class, Data
A dataset whose primary content consists of spatially arranged pixel or voxel values representing an observed or reconstructed object.
Image Height Pixels
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImageHeightPixels- Type
- Class, Characteristic
- altLabel
- image height
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A quantitative characteristic specifying image height pixels under the conditions and reference basis stated with the record.
Image Width Pixels
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImageWidthPixels- Type
- Class, Characteristic
- altLabel
- image width
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A geometric characteristic specifying image width pixels under the conditions and reference basis stated with the record.
Image-analysis software
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImageAnalysisSoftware- Type
- Class, SoftwareArtifact
Scientific software used to process, segment, quantify, analyze, or visualize image or volumetric data.
Imaging instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImagingInstrument- Type
- Class, Instrument
A measurement instrument that acquires spatially resolved representations of a specimen or system.
Imaging measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImagingMeasurement- Type
- Class, Measurement
A characterization measurement that produces spatially resolved data representing a specimen or system.
Immunofluorescence Cytocompatibility Assay
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImmunofluorescenceCytocompatibilityAssay- Type
- Class, Measurement
- altLabel
- cytocompatibility assay
Biological assay to quantify cell adhesion/composition on substrates (e.g., astrocyte fraction and morphology).
Impedance Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImpedanceDataset- Type
- Class, Data
- altLabel
- EIS spectra dataset; H2/N2 impedance spectra; impedance spectra
A dataset containing impedance data generated by Electrochemical Impedance Spectroscopy Potentiostatic, Electrochemical Impedance Spectroscopy Galvanostatic, and Proton Conductivity Measurement.
Impedance Modulus Slope K
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImpedanceModulusSlopeK- Type
- Class, Compatibility
- altLabel
- K; Z
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DerivedCoefficient
A property denoting impedance modulus slope K and determined in Electrochemical Impedance Spectroscopy Potentiostatic.
Impregnated Support
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImpregnatedSupport- Type
- Class, Matter
A material entity corresponding to an impregnated support and produced in Catalyst Impregnation.
Impregnation Cycles
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ImpregnationCycles- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS
A count characteristic specifying impregnation cycles under the conditions and reference basis stated with the record.
In Plane Effective Diffusivity Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InPlaneEffectiveDiffusivityMeasurement- Type
- Class, Measurement
- altLabel
- radial in-plane effective diffusivity measurement
A measurement process that determines the in-plane effective oxygen diffusion coefficient from radial oxygen-transport measurements using a fiber-optic oxygen probe and generating oxygen concentration time-series data.
In Plane Electronic Conductivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InPlaneElectronicConductivity- Type
- Class, Characteristic
- altLabel
- Catalyst support Electornic conductivity; electrical conductivity; σ_cl
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricalConductivity
A property denoting in plane electronic conductivity and determined in Four Probe Resistance Measurement, Review Statement Extraction, and In Plane Electronic Conductivity Measurement.
In Plane Electronic Conductivity Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InPlaneElectronicConductivityMeasurement- Type
- Class, Measurement
- altLabel
- electrical conductivity measurement; in-plane conductivity test; resistance measurement
A measurement process that uses in plane electronic conductivity measurement to determine In Plane Electronic Conductivity using Micro Ohm Meter and Digital Multimeter and generating Conductivity Dataset.
Incident Photon To Current Efficiency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IncidentPhotonToCurrentEfficiency- Type
- Class, Characteristic
- altLabel
- IPCE
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting incident photon-to-current conversion efficiency (spectral quantum efficiency) of DSSC.
Incident Photon To Current Efficiency Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IncidentPhotonToCurrentEfficiencyMeasurement- Type
- Class, Measurement
- altLabel
- IPCE measurement; incident photon-to-current efficiency
Spectral responsivity measurement (IPCE vs wavelength) for DSSC.
Incubation Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IncubationTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with incubation.
Inductance L
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InductanceL- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/InductanceArea
A property denoting inductance L and determined in Electrochemical Impedance Spectroscopy Potentiostatic.
Information entity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InformationEntity- Type
- Class, Class
An entity whose identity is determined by information content that can be recorded, communicated, or processed.
Infrared Camera
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InfraredCamera- Type
- Class, Instrument
Infrared camera used to measure stack temperature.
Infrared Thermometry Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InfraredThermometryMeasurement- Type
- Class, Measurement
- altLabel
- IR thermometer measurement; infrared camera temperature measurement; infrared thermometry
A measurement process that uses infrared thermometry measurement to determine Temperature and Operating Temperature using Thermometer and Infrared Camera.
Initial Catalytic Activity Loss Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InitialCatalyticActivityLossPercent- Type
- Class, Characteristic
- altLabel
- Loss in initialcataytio activity; loss in initial catalytic activity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
Percentage decrease in a specified catalytic activity from an identified initial reference state to an identified comparison state, calculated as 100 times the initial activity minus the comparison activity, divided by the initial activity.
Initial ionomer film thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InitialIonomerFilmThickness- Type
- Class, Characteristic
- altLabel
- ionomer initial film thickness
- notation
- t0
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/M | Value-free QUDT guidance for Initial ionomer film thickness; the curated source reports [m].
Limiting effective thickness of the ionomer film on the covered platinum-on-carbon surface as ionomer loading approaches zero, representing the characteristic thickness of the first deposited ionomer layer.
Initial Membrane Water Content Lambda
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InitialMembraneWaterContentLambda- Type
- Class, Characteristic
- altLabel
- initial membrane water content λ; λ_initial
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
Initial membrane hydration number before the specified operation, equal to the amount of membrane water divided by the amount of membrane ion-exchange sites.
Initiator Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InitiatorConcentration- Type
- Class, Characteristic
- altLabel
- KPS concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentration
A composition characteristic specifying the amount of initiator per stated quantity of mixture or solution.
Ink Aging Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkAgingTime- Type
- Class, Characteristic
- altLabel
- aging time; stability test time; storage time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with ink aging.
Ink Batch Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkBatchVolume- Type
- Class, Characteristic
- altLabel
- Ink volume
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by ink batch.
Ink Composition Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkCompositionSpecification- Type
- Class, Specification
- altLabel
- catalyst ink composition; ink composition; sample specifications
A specification of ink constituent identities and their masses, volumes, or composition fractions, including the reference bases used for those quantities.
Ink Degassing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkDegassing- Type
- Class, Manufacturing
Degassing/deaeration step during catalyst ink preparation (4 min in MAZERUSTAR KK-250S).
Ink Dilution Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkDilutionRatio- Type
- Class, Compatibility
- altLabel
- dilution ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A composition characteristic that represents ink dilution ratio for a material, component, process, measurement, or hydrogen-electrochemical system.
Ink Drop Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkDropVolume- Type
- Class, Characteristic
- altLabel
- aliquot volume
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by ink drop.
Ink Extrusion Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkExtrusionProcess- Type
- Class, Manufacturing
Extrusion-based additive manufacturing step producing microfilaments from powder inks.
Ink Formulation Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkFormulationMeasurement- Type
- Class, Compatibility
- altLabel
- formulation of printing ink; ink formulation
A measurement process for ink formulation measurement.
Ink Formulation Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkFormulationSpecification- Type
- Class, Specification
- altLabel
- ink formulation
A specification of an ink recipe that records constituent identities, selected amounts or fractions, and formulation descriptors relevant to the intended processing method.
Ink Formulation Specification Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkFormulationSpecificationMeasurement- Type
- Class, Process
- altLabel
- ink formulation; ink formulation parameters
An analysis that extracts or derives the ingredient amounts and composition fractions specified for an ink formulation, distinguishing specified quantities from newly measured properties.
Ink Mixing Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkMixingSpeed- Type
- Class, Characteristic
- altLabel
- mixing speed; stirring speed
- QUDT guidance
- http://qudt.org/vocab/quantitykind/RotationalSpeed
A rate characteristic specifying the speed associated with ink mixing.
Ink Mixing Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkMixingTime- Type
- Class, Characteristic
- altLabel
- mixing time; stirring time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with ink mixing.
Ink Preparation Burning Reaction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkPreparationBurningReaction- Type
- Class, Manufacturing
- altLabel
- burning reaction; purposely burning reaction
Occurs when Nafion solution or isopropyl alcohol contacts dry Pt/C during ink preparation; reported to cause exothermic 'burning reaction' leading to Pt nanoparticle agglomeration and reduced BET surface area/ECSA.
Ink Printability Assessment
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkPrintabilityAssessment- Type
- Class, Process
- altLabel
- printability assessment
An analysis that evaluates an ink against specified printing criteria using measured or calculated formulation and process descriptors.
Ink Recipe Definition
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkRecipeDefinition- Type
- Class, Specification
A specification that records or prescribes the constituent identities, relative amounts, and preparation instructions for an ink recipe.
Ink Solvent Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkSolventVolume- Type
- Class, Characteristic
- altLabel
- IPA volume; isopropanol volume
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by ink solvent.
Ink Stability Model Calculation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkStabilityModelCalculation- Type
- Class, Process
An analysis that applies a specified colloidal-interaction and aggregation model to estimate an ink stability ratio or a characteristic aggregation or stability time.
Ink Stability Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkStabilityTime- Type
- Class, Characteristic
- altLabel
- phase separation time; settling time; stability time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time
A property denoting time until visible phase separation/settling (experimental) or until threshold aggregate size (model).
Ink Storage Stability Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkStorageStabilityDuration- Type
- Class, Characteristic
- altLabel
- ink stability; ink stability duration; storage stability
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time
Elapsed storage time for which an ink satisfies a specified stability criterion under stated storage conditions.
Ink Storage Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkStorageTime- Type
- Class, Characteristic
- altLabel
- storage time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time
A temporal characteristic specifying the elapsed time associated with ink storage.
Ink Ultrasonication
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkUltrasonication- Type
- Class, Manufacturing
- altLabel
- ultrasonic bath; ultrasonic mixing; ultrasonicated
A manufacturing process for ink ultrasonication using Catalyst Ink, Pt Ru On Carbon Catalyst, and Isopropanol with Ultrasonicator and Ultrasonic Bath and producing Catalyst Ink.
Ink Water Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkWaterVolume- Type
- Class, Characteristic
- altLabel
- water volume
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by ink water.
Ink-to-Composition Model
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkToCompositionModel- Type
- Class, Process
- altLabel
- IET ink to composition model; ITC model
A computational process that predicts cathode-catalyst-layer composition and wetting descriptors from catalyst, ionomer, pore-structure, wettability, and constituent-density inputs.
Ink-to-Composition Model input dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkToCompositionModelInputDataset- Type
- Class, Data
A value-free schema dataset grouping property-valued inputs expected by the Ink-to-Composition Model.
Ink-to-Composition Model scalar-result dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkToCompositionModelScalarResultDataset- Type
- Class, Data
A value-free schema dataset grouping scalar property fields produced by the Ink-to-Composition Model.
Inkjet Printer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkjetPrinter- Type
- Class, Instrument
- altLabel
- Dimatix DMP-2811 printer; Dimatix printer; piezo driven ink jet printer
An instrument corresponding to an inkjet printer and used in Inkjet Printing and Inkjet Printing Process.
Inkjet Printing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkjetPrinting- Type
- Class, Manufacturing
- altLabel
- digital printing; ink-jet
Digital printing method requiring controlled ink rheology and particle size to avoid nozzle clogging.
Inkjet Printing Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkjetPrintingProcess- Type
- Class, Manufacturing
- altLabel
- DOD inkjet printer; inkjet printing
Drop-on-demand inkjet printing process used to print QD dot arrays.
Inkjet Printing Spatial Resolution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InkjetPrintingSpatialResolution- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
Minimum feature dimension or separation that an inkjet-printing process can reproducibly distinguish in a printed pattern under specified printing and substrate conditions.
Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Instrument- Type
- Class, Instrument
A device used to perform, support, control, or record a scientific measurement or manufacturing operation.
- subclassOf / subPropertyOf
- Device
Mappings
- skos:exactMatch
https://w3id.org/polymat/Instrument (Instrument) - skos:exactMatch
https://w3id.org/skgo/modsci#ScientificInstrument (Instrument) - skos:narrowMatch
http://www.bioassayontology.org/bao#BAO_0000697 (detection instrument)
Instrument component
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InstrumentComponent- Type
- Class, Matter
A device that functions as a constituent or accessory of a scientific instrument or measurement arrangement.
- subclassOf / subPropertyOf
- Device
Inter Agglomerate Pore Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InterAgglomeratePoreSize- Type
- Class, Characteristic
- altLabel
- average pore size; pore size; secondary pore size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting inter agglomerate pore size and determined in Literature Microstructure Compilation, X Ray Computed Tomography Imaging, and Mercury Intrusion Porosimetry Measurement.
Mappings
- skos:broadMatch
http://purl.allotrope.org/ontologies/quality#AFQ_0000244 (pore size) - skos:broadMatch
http://purl.obolibrary.org/obo/MS_1003924 (pore size)
Inter Crystallite Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InterCrystalliteDistance- Type
- Class, Characteristic
- altLabel
- ID; inter-particle distance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting inter crystallite distance and determined in Reported Material Property.
Interdiffusion Onset Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InterdiffusionOnsetTemperature- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermodynamicTemperature | http://qudt.org/vocab/unit/K
A property denoting temperature at which interdiffusion between metallic phases is first observed (e.g., Fe-Ni interdiffusion forming fcc-(Fe,Ni)).
Interdigitated Electrode Array
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InterdigitatedElectrodeArray- Type
- Class, Matter
- altLabel
- interdigitated electrodes
An arrangement of electrically separated, interleaved electrode fingers used to impose or sense electrical or electrochemical responses in the intervening regions.
Interfacial Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InterfacialResistance- Type
- Class, Compatibility
- altLabel
- R_interfacial; dissolution resistance; gas–ionomer interface resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassTransportResistance | http://qudt.org/vocab/unit/OHM
A property denoting interfacial resistance.
Interlayer Spacing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InterlayerSpacing- Type
- Class, Characteristic
- altLabel
- d(002); d-spacing; d003
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting crystallographic interlayer spacing measured from HR-TEM lattice fringes.
Intermediate Relaxation Resistance R 0
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IntermediateRelaxationResistanceR0- Type
- Class, Compatibility
- altLabel
- R0
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance
A property denoting intermediate relaxation resistance R 0 and determined in Electrochemical Impedance Spectroscopy Potentiostatic.
Internal Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InternalCurrentDensity- Type
- Class, Compatibility
- altLabel
- i_n
- QUDT guidance
- http://qudt.org/vocab/quantitykind/CurrentDensity
A property denoting internal current density term in Eq. (1) polarization curve model.
Interplanar Lattice Spacing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InterplanarLatticeSpacing- Type
- Class, Characteristic
- altLabel
- interplanar spacing; lattice spacing
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting interplanar lattice spacing measured from HRTEM (e.g., ~0.2 nm for Pd (200) planes).
Interplanar Spacing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#InterplanarSpacing- Type
- Class, Characteristic
- altLabel
- d-spacing
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting interplanar spacing (e.g., d(002)) measured from HRTEM or XRD.
Intrinsic Viscosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IntrinsicViscosity- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A rheological characteristic equal to the limiting value of reduced viscosity or inherent viscosity of a polymer solution as solute concentration approaches zero.
Iodide Triiodide Redox Electrolyte
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IodideTriiodideRedoxElectrolyte- Type
- Class, Matter
- altLabel
- I3-/I- electrolyte; iodine redox couple; redox electrolyte
Electrolyte containing iodide/triiodide redox couple and additives in 3-methoxypropionitrile.
Iodine Value
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IodineValue- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting iodine value and determined in Iodine Value Measurement.
Iodine Value Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IodineValueMeasurement- Type
- Class, Measurement
- altLabel
- iodine value; iodine value determination
A measurement process that uses iodine value measurement to determine Iodine Value.
Ion Beam Current
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonBeamCurrent- Type
- Class, Characteristic
- altLabel
- FIB current; gallium beam current
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrent
An electrical characteristic specifying the electric current associated with ion beam.
Ion Beam Energy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonBeamEnergy- Type
- Class, Characteristic
- altLabel
- FIB acceleration energy
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Energy
An energy characteristic specifying the energy associated with ion beam.
Ion Exchange Capacity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonExchangeCapacity- Type
- Class, Characteristic
- altLabel
- HNN4; HNN9; IEC
- QUDT guidance
- http://qudt.org/vocab/quantitykind/IonExchangeCapacity
Amount of exchangeable ionic charge in an ion-exchange material divided by its dry mass, expressed as charge equivalents per unit mass.
Ion Exchange Capacity Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonExchangeCapacityMeasurement- Type
- Class, Measurement
- altLabel
- IEC; IEC measurement
A measurement process that uses ion exchange capacity measurement to determine Ion Exchange Capacity.
Ionic Liquid Additive
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonicLiquidAdditive- Type
- Class, Matter
- altLabel
- IL; ionic liquid
An ionic liquid added to a material or formulation to modify its physical, chemical, or electrochemical behavior.
Ionic Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonicResistance- Type
- Class, Characteristic
- altLabel
- Re; Ri; ionic resistance of catalyst layer
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance | http://qudt.org/vocab/unit/OHM
A property denoting catalyst-layer ionic resistance derived from high-frequency impedance analysis at low current density.
Ionic Strength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonicStrength- Type
- Class, Characteristic
- altLabel
- I; [H+]
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountConcentration
One half of the sum, over all dissolved ionic species, of each species' amount concentration multiplied by the square of its charge number.
Mappings
- skos:exactMatch
http://biomodels.net/SBO/SBO_0000623 (ionic strength) - skos:exactMatch
http://champ-project.org/images/ontology/cao.owl#CAO_000143 (Ionic strength)
Ionomer Adsorption Capacity Per Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerAdsorptionCapacityPerMass- Type
- Class, Characteristic
- altLabel
- maximum adsorption capacity (mg/mg); Γmax
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A property denoting maximum first-layer Nafion adsorption per substrate mass from Langmuir fit.
Ionomer Adsorption Capacity Per Surface Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerAdsorptionCapacityPerSurfaceArea- Type
- Class, Characteristic
- altLabel
- maximum adsorption per unit surface area (mg/m²); Γ'max
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerArea
A property denoting maximum first-layer Nafion adsorption normalized by BET surface area.
Ionomer Adsorption Isotherm Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerAdsorptionIsothermMeasurement- Type
- Class, Measurement
- altLabel
- Nafion adsorption isotherm; adsorption isotherm measurement; adsorption ratio measurement
Quantifies Nafion adsorption on CB and Pt/C surfaces vs equilibrium concentration; Langmuir fits yield KL and Γmax.
Ionomer Adsorption Rate Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerAdsorptionRateMeasurement- Type
- Class, Measurement
- altLabel
- adsorption rate measurement; ionomer adsorption into Pt/carbon
An adsorption measurement that separates unadsorbed ionomer from a dispersion and uses a mass balance to determine the fraction of the initial ionomer adsorbed on the solid.
Ionomer Adsorption Rate On Pt Carbon
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerAdsorptionRateOnPtCarbon- Type
- Class, Characteristic
- altLabel
- adsorption rate of ionomer on Pt/carbon
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting ionomer adsorption rate on pt carbon and determined in Ionomer Adsorption Rate Measurement.
Ionomer Adsorption Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerAdsorptionRatio- Type
- Class, Characteristic
- altLabel
- I (ionomer adsorption ratio); adsorption ratio; ionomer adsorption
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting dimensionless ratio of ionomers adsorbed on Pt/C: Γ = (Cp0 - Cp)/Cp0 (Eq. 2).
Mappings
- skos:broadMatch
http://semanticscience.org/resource/SIO_001018 (ratio)
Ionomer Aggregate Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerAggregateDiameter- Type
- Class, Characteristic
- altLabel
- aggregate diameter; cylindrical ionomer diameter; ionomer aggregate size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting ionomer aggregate diameter and determined in Molecular Dynamics Simulation.
Mappings
- skos:broadMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/dia_xxx_xxx-bb6404c75508494a93ef3ae2ad7f72ff-vp (Diameter)
Ionomer Aggregate Size Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerAggregateSizeRatio- Type
- Class, Characteristic
- altLabel
- aggregate size ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A property denoting dimensionless ratio comparing ionomer aggregate sizes between two solvent conditions (e.g., water vs dipropylene glycol).
Ionomer Coating Simulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerCoatingSimulation- Type
- Class, Process
- altLabel
- ionomer adsorption simulation; ionomer coating; ionomer coating step
A computational model execution that assigns or predicts an ionomer distribution on catalyst or support surfaces under stated ionomer-content, film-thickness, coverage, or adsorption constraints.
Ionomer Connected Electrochemically Active Surface Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerConnectedElectrochemicallyActiveSurfaceArea- Type
- Class, Compatibility
- altLabel
- ECSA_ionomer; Pt surface in contact with ionomer; ionomer connected ECSA
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerMass
A property denoting ionomer connected electrochemically active surface area and determined in Carbon Monoxide Stripping Voltammetry.
Ionomer Coverage Intercept
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerCoverageIntercept- Type
- Class, Compatibility
- altLabel
- coverage intercept
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A surface characteristic that represents ionomer coverage intercept for a material, component, process, measurement, or hydrogen-electrochemical system.
Ionomer Coverage Ln Coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerCoverageLnCoefficient- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A surface characteristic that represents ionomer coverage ln coefficient for a material, component, process, measurement, or hydrogen-electrochemical system.
Ionomer Coverage On Carbon
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerCoverageOnCarbon- Type
- Class, Characteristic
- altLabel
- ionomer coverage on C
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SurfaceCoverage | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction/percent of carbon surface covered by ionomer inferred from EIS double-layer capacitance with CO blocking.
Ionomer Coverage On Platinum
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerCoverageOnPlatinum- Type
- Class, Characteristic
- altLabel
- ionomer coverage on Pt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SurfaceCoverage | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction/percent of Pt surface covered by ionomer inferred from EIS double-layer capacitance with CO blocking.
Ionomer Dispersion Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerDispersionMassFraction- Type
- Class, Characteristic
- altLabel
- diluted ionomer dispersion; ionomer dispersion; ionomer dispersion content
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A composition characteristic expressing the mass of ionomer dispersion divided by the stated total reference mass.
Ionomer Dispersion Property Compilation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerDispersionPropertyCompilation- Type
- Class, Process
- altLabel
- ionomer dispersion solutions
An analysis that extracts and organizes reported ionomer-dispersion composition and material-property values while retaining their sources and applicable conditions.
Ionomer Dispersion Property Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerDispersionPropertyDataset- Type
- Class, Data
- altLabel
- Table 1 dataset; ionomer dispersion table
A dataset containing ionomer dispersion property data generated by Ionomer Dispersion Property Compilation.
Ionomer Equivalent Weight
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerEquivalentWeight- Type
- Class, Characteristic
- altLabel
- Aquivion; EW; equivalent weight
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerAmountOfSubstance | http://qudt.org/vocab/unit/GM-PER-MOL
Dry ionomer mass per equivalent of exchangeable ionic charge.
Ionomer Film
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerFilm- Type
- Class, Matter
- altLabel
- Nafion film; ionomer coating; thin ionomer film
Thin ionomer film coating Pt/C agglomerates in cathode catalyst layer; provides additional O2 transport resistance in low-Pt cells.
Ionomer Film Oxygen Transport Resistivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerFilmOxygenTransportResistivity- Type
- Class, Compatibility
- altLabel
- R_N; ionomer film O2 transport resistivity; oxygen transport resistivity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/OxygenTransportResistivity
A property denoting ionomer film O2 transport resistivity (units s cm^-1) defined in Nomenclature and computed via single-pore model (Eq. for \mathcal{R}_N).
Ionomer Film Resistance Exponent D
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerFilmResistanceExponentD- Type
- Class, Compatibility
- altLabel
- D
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
An electrochemical characteristic that represents ionomer film resistance exponent d for a material, component, process, measurement, or hydrogen-electrochemical system.
Ionomer Film Resistance Prefactor C
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerFilmResistancePrefactorC- Type
- Class, Compatibility
- altLabel
- C; interfacial resistance prefactor; ionomer film resistance C
- QUDT guidance
- http://qudt.org/vocab/quantitykind/TimePerLength
An electrochemical characteristic that represents ionomer film resistance prefactor c for a material, component, process, measurement, or hydrogen-electrochemical system.
Ionomer Film Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerFilmThickness- Type
- Class, Characteristic
- altLabel
- Ionomer film thickness; Nafion film thickness; ionomer layer thickness; lN
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting thickness of ionomer film covering catalyst particles or supports (nm scale).
Ionomer Inter Particle Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerInterParticleDistance- Type
- Class, Characteristic
- altLabel
- Nafion ionomer inter-NP distance; inter-NP distance; interparticle distance (d)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting mean interparticle distance between PFSA ionomer nanoparticles estimated from the SANS correlation peak (d=2π/q).
Ionomer Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerMass- Type
- Class, NormalizationBasis
- altLabel
- Nafion mass (per area); Nafion mass loading; electrolyte mass
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A normalization basis corresponding to ionomer mass and used as the reference basis for reporting quantitative results or properties.
Ionomer Mass Fractal Radius Of Gyration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerMassFractalRadiusOfGyration- Type
- Class, Characteristic
- altLabel
- Rg of Nafon ionomer mass fractal in; Rg of ionomer mass fractal
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting radius of gyration (Rg) of the ionomer mass-fractal structure forming the shell/percolating through carbon aggregates (carbon contrast-match).
Ionomer Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerMassFraction- Type
- Class, Characteristic
- altLabel
- Nafion fraction; Y_el; ionomer/catalyst mass ratio 3/7
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
http://qudt.org/vocab/quantitykind/MassFraction
Mass of ionomer divided by the total mass of the explicitly specified mixture or material reference domain.
Ionomer Nanofiber Scaffolding Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerNanofiberScaffoldingCatalystLayer- Type
- Class, Matter
Cathode catalyst layer architecture comprising an electrospun PFSA nanofiber mat scaffold alternated with electrosprayed Pt/C + ionomer coating layers.
Ionomer Nanoparticle Height
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerNanoparticleHeight- Type
- Class, Characteristic
- altLabel
- cylindrical particle height
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting ionomer nanoparticle height and determined in Contrast Variation SANSUSANS Measurement.
Ionomer Nanoparticle Radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerNanoparticleRadius- Type
- Class, Characteristic
- altLabel
- cylinder radius; radius of Nafion ionomer NPs; radius of Nafion ionomer NPs (nm)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting radius of rodlike (cylindrical) PFSA ionomer nanoparticles estimated from SANS cylinder model fits.
Ionomer Oxygen Transport Resistance Component
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerOxygenTransportResistanceComponent- Type
- Class, Characteristic
- altLabel
- R_ionomer; film transport component; ionomer film oxygen transport component
- QUDT guidance
- http://qudt.org/vocab/quantitykind/OxygenTransportResistance | http://qudt.org/vocab/unit/OHM
A property denoting ionomer-related contribution to pressure-independent transport resistance.
Ionomer Patch Surface Coverage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerPatchSurfaceCoverage- Type
- Class, Characteristic
- altLabel
- fractional ionomer coverage; ionomer coverage; ionomer patch coverage
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction of catalyst-layer surface covered by ionomer patches (estimated from SEM images).
Ionomer Porosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerPorosity- Type
- Class, Characteristic
- altLabel
- nanoporous ionomer
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Porosity
A morphological characteristic describing ionomer porosity under the conditions and reference basis stated with the record.
Ionomer Solution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerSolution- Type
- Class, Matter
- altLabel
- HC solution; Pemion solution; ionomer dispersion
A material entity corresponding to an ionomer solution and used as an input in Catalyst Ink Preparation, Dynamic Light Scattering Measurement, and Electron Microscopy Imaging.
Ionomer Thin Film Permeability
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerThinFilmPermeability- Type
- Class, Characteristic
- altLabel
- gas permeability of ionomer film; Π_ionomer
- QUDT guidance
- http://qudt.org/vocab/quantitykind/GasPermeability
A property denoting ionomer thin film permeability.
Ionomer Thin Film Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerThinFilmThickness- Type
- Class, Characteristic
- altLabel
- Nafion ionomer film thickness; Nafion thin film thickness; thin film thickness
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the distance between the opposing bounding surfaces of ionomer thin film.
Ionomer To Catalyst Mass Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerToCatalystMassRatio- Type
- Class, Characteristic
- altLabel
- I/Cat; ionomer-to-catalyst ratio; ratio of FAA-3 ionomer to catalyst
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
Ratio of dry ionomer mass to the mass of the explicitly identified catalyst material in the same formulation or electrode.
Ionomer Type
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerType- Type
- Class, Characteristic
- altLabel
- PTFE ionomer; PVDF ionomer
A categorical characteristic identifying ionomer type under the conditions and reference basis stated with the record.
Ionomer Uniformity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerUniformity- Type
- Class, Compatibility
- altLabel
- uniform ionomer distribution
- QUDT guidance
- http://qudt.org/vocab/quantitykind/UniformityIndex
A quantitative characteristic that represents ionomer uniformity for a material, component, process, measurement, or hydrogen-electrochemical system.
Ionomer Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerVolumeFraction- Type
- Class, Characteristic
- altLabel
- ionomer bulk volume fraction; ε_I; ε_m
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction | http://qudt.org/vocab/unit/PERCENT
A composition characteristic expressing the volume occupied by ionomer divided by the stated total reference volume.
Ionomer Weight Percent In Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerWeightPercentInCatalystLayer- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A composition characteristic expressing the stated fractional composition identified as Ionomer Weight Percent In Catalyst Layer.
Ionomer-catalyst dispersion parameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerCatalystDispersionParameter- Type
- Class, Characteristic
- notation
- kA
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for Ionomer-catalyst dispersion parameter; the curated source reports [-].
A dimensionless dispersion characteristic representing the tendency of ionomer to spread over a platinum-on-carbon surface rather than form larger ionomer aggregates.
Ionomer-coated pore-wall contact angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerCoatedPoreWallContactAngle- Type
- Class, Characteristic
- altLabel
- CCL contact angle of ionomer pore wall
- notation
- thetaion
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle | http://qudt.org/vocab/unit/DEG | Value-free QUDT guidance for Ionomer-coated pore-wall contact angle; the curated source reports [deg].
Effective water contact angle of an ionomer-coated pore wall determined by the ionomer degree of alignment.
Ionomer-to-carbon ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IonomerToCarbonRatio- Type
- Class, Characteristic
- altLabel
- I/C-ratio; ITC ionomer-to-carbon ratio
- notation
- mI:C
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for Ionomer-to-carbon ratio; the curated source reports [-].
Mass ratio of dry ionomer to carbon support in the catalyst layer.
IRCompensation Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IRCompensationFraction- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
Fraction of the estimated uncompensated ohmic voltage drop iR that is corrected by an electrochemical instrument or by post-processing.
Irgacure 819
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Irgacure819- Type
- Class, Matter
Photoinitiator used in multiple resins/inks.
Irgacure Oxe 02
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IrgacureOxe02- Type
- Class, Matter
Photoinitiator listed among materials.
Iridium Oxide Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IridiumOxideCatalyst- Type
- Class, Matter
- altLabel
- Iridium(IV) oxide catalyst powder; iridium oxide; iridium oxide (IrO2) catalyst particles
A material entity corresponding to an iridium oxide catalyst and used as an input in Catalyst Ink Preparation.
Iron Acetate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IronAcetate- Type
- Class, Matter
Iron acetate precursor used (with cobalt acetate) for FeCo catalyst deposition.
Iron II Ichloride Hexahydrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IronIIIchlorideHexahydrate- Type
- Class, Matter
- altLabel
- ferric chloride hexahydrate
Fe salt added during shearing to catalyze carbothermal graphitization.
Iron III Nitrate Nonahydrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IronIIINitrateNonahydrate- Type
- Class, Matter
A material entity corresponding to an iron III nitrate nonahydrate and used as an input in Catalyst Ink Preparation.
Iron Iron Oxide Catalyst Nanoparticle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IronIronOxideCatalystNanoparticle- Type
- Class, Matter
- altLabel
- iron based catalyst particles; iron/iron oxide catalyst particles
Active catalyst particles generated from ferritin after thermal treatment; mixture of iron and iron oxide under CVD conditions.
Iron Oxide Fe 3 O 4
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IronOxideFe3O4- Type
- Class, Matter
- altLabel
- Fe3O4; iron oxide
Iron oxide (Fe3O4) used as non-Pt ORR catalyst blended into conductive ink (CIFe).
Irradiation Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IrradiationTime- Type
- Class, Characteristic
- altLabel
- visible-light irradiation time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with irradiation.
IRSO 3 Stretching Peak Wavenumber
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IRSO3StretchingPeakWavenumber- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Wavenumber
A property denoting fTIR wavenumber position of Nafion sulfonate (-SO3-) asymmetric stretching peak.
Isodecyl Acrylate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IsodecylAcrylate- Type
- Class, Matter
- altLabel
- I.A.
Monomer component of DLP elastomer resin.
Isopropanol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Isopropanol- Type
- Class, Matter
- altLabel
- isopropanol alcohol; isopropanol solvent; isopropyl alcohol
A material entity representing isopropanol under the conditions and reference basis stated with the record.
Isopropanol Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IsopropanolMassFractionInInk- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Isopropanol Mass Fraction In Ink.
Isopropanol To Water Volume Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IsopropanolToWaterVolumeRatio- Type
- Class, Characteristic
- altLabel
- isopropanol and water ratio 2:1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A dimensionless characteristic expressing the stated ratio identified as Isopropanol To Water Volume Ratio.
Isopropanol Volume Fraction In Solvent Mixture
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IsopropanolVolumeFractionInSolventMixture- Type
- Class, Characteristic
- altLabel
- IPA; IPA volume fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
A composition characteristic expressing the stated fractional composition identified as Isopropanol Volume Fraction In Solvent Mixture.
Isopropyl Alcohol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#IsopropylAlcohol- Type
- Class, Matter
- altLabel
- isopropanol
Specific solvent used in catalyst ink; not explicitly present as a distinct Matter term in ontology (only as altLabel under generic Solvent).
Jeffamine M 2005
- IRI
https://w3id.org/h2kg/hydrogen-ontology#JeffamineM2005- Type
- Class, Matter
Polyether amine (Jeffamine M-2005, MW ~2000 g/mol) used as ring-opening agent to prepare polymeric dispersants (Section 2.1).
JV Performance Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#JVPerformanceDataset- Type
- Class, Data
Dataset of current density versus voltage under illumination.
K 2 O Al 2 O 3 Molar Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#K2OAl2O3MolarRatio- Type
- Class, Characteristic
- altLabel
- K2O/Al203; K2O/Al2O3
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarRatio
A dimensionless characteristic expressing the stated ratio identified as K 2 O Al 2 O 3 Molar Ratio.
Kapton Film
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KaptonFilm- Type
- Class, Matter
- altLabel
- Kapton decal substrate; Kapton film (Du Pont); Kapton®
Polyimide film used as decal substrate.
Karl Fischer Titrator
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KarlFischerTitrator- Type
- Class, Instrument
- altLabel
- Metrohm 870 Titrino plus
Karl Fischer titrator instrument used to determine water content (Section 2.3.5).
Ketjen Black EC 300 J Carbon Support
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KetjenBlackEC300JCarbonSupport- Type
- Class, Matter
- altLabel
- EC300J; Ketjen Black EC300J; carbon black support
Conventional porous carbon support (Ketjen Black EC300J) used for Pt/K reference catalysts.
Ketonic Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KetonicResin- Type
- Class, Matter
- altLabel
- cyclohexanone-formaldehyde resin
A resin obtained by condensation involving ketone compounds, used as a binder or formulation additive.
Ketonic Resin Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KetonicResinMass- Type
- Class, Characteristic
- altLabel
- Ketonic resin; cyclohexanone-formaldehyde resin mass
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of ketonic resin.
Kinetic Current
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KineticCurrent- Type
- Class, Compatibility
- altLabel
- i_k; j_k; kinetic current density
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity | http://qudt.org/vocab/unit/MilliA-PER-CentiM2
A property denoting kinetic current normalized to Geometric Area and determined in Rotating Ring Disk Voltammetry and Linear Sweep Voltammetry.
Kitchen Blender
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KitchenBlender- Type
- Class, Instrument
- altLabel
- kitchen blender (AUX Co.)
Household blender used for solvent-free shear mixing of biomass with Fe salt.
Knudsen Diffusivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KnudsenDiffusivity- Type
- Class, Characteristic
- altLabel
- Dik
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DiffusionCoefficient
A property denoting Knudsen diffusion coefficient of O2 in pores used in Bosanquet equation (cm2/s).
Knudsen Number
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KnudsenNumber- Type
- Class, Characteristic
- altLabel
- Kn
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
The dimensionless ratio of molecular mean free path to the stated characteristic transport length, such as a pore diameter.
Mappings
- skos:exactMatch
http://www.ontology-of-units-of-measure.org/resource/om-2/KnudsenNumber (Knudsen number)
Knudsen Oxygen Transport Resistance Component
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KnudsenOxygenTransportResistanceComponent- Type
- Class, Characteristic
- altLabel
- Knudsen resistance; R_Knudsen; void pore oxygen transport resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Resistance | http://qudt.org/vocab/unit/OHM
A property denoting knudsen diffusion-related contribution to pressure-independent transport resistance.
KOH Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KOHConcentration- Type
- Class, Characteristic
- altLabel
- M KOH
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarConcentration
A composition characteristic specifying the amount of koh per stated quantity of mixture or solution.
KOH Immersion Activation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KOHImmersionActivation- Type
- Class, Process
A conditioning process in which an anion-exchange membrane or ionomer-containing electrode is immersed in potassium hydroxide solution to exchange its counterions toward hydroxide form before electrochemical testing.
KOH Soaking Pretreatment
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KOHSoakingPretreatment- Type
- Class, Manufacturing
Pretreatment step for electrodes and AEM to exchange halide to OH− via soaking in 1 M KOH for 1 h, followed by washing.
Kookaburra USANS Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#KookaburraUSANSInstrument- Type
- Class, Instrument
- altLabel
- Kookaburra USANS instrument (ANSTO)
An instrument corresponding to a kookaburra USANS instrument and used in Contrast Variation SANSUSANS Measurement.
La B 6 Calibration Standard
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaB6CalibrationStandard- Type
- Class, Matter
Calibration standard powder for diffraction setup.
La Ni O 3 Perovskite Oxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaNiO3PerovskiteOxide- Type
- Class, Matter
- altLabel
- LaNiO3; LaNiO₃; perovskite oxide LaNiO3
A material entity corresponding to a la ni O 3 perovskite oxide and used as an input in Cyclic Voltammetry and ICP Elemental Analysis Measurement.
Lamp To Sample Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LampToSampleDistance- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying lamp to sample distance under the conditions and reference basis stated with the record.
Langmuir Adsorption Constant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LangmuirAdsorptionConstant- Type
- Class, Characteristic
- altLabel
- KL; Langmuir constant; equilibrium adsorption constant
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LangmuirAdsorptionEquilibriumConstant
A property denoting first-layer Langmuir adsorption equilibrium constant from adsorption isotherm fits; unit not explicitly stated in paper.
Large Pore Fraction Above 150 nm
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LargePoreFractionAbove150nm- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting large pore fraction above 150 nm and determined in FIBSEM Tomography Measurement.
Laser Diffraction Particle Size Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaserDiffractionParticleSizeAnalyzer- Type
- Class, Instrument
- altLabel
- LS 13 320 Particle Size Analyzer (Beckman Coulter); S3500 Microtrac laser diffraction particle size analyzer
Laser diffraction analyzer used in wet mode for particle sizing.
Laser Diffraction Scattering Particle Size Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaserDiffractionScatteringParticleSizeMeasurement- Type
- Class, Measurement
- altLabel
- laser diffraction; laser diffraction/scattering particle size analysis; particle size distribution
A particle-characterization measurement that records the angular distribution of laser-scattered light and interprets it with a stated optical model to estimate a particle-size distribution.
Laser Fluence
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaserFluence- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/EnergyPerArea
A quantitative characteristic specifying laser fluence under the conditions and reference basis stated with the record.
Laser Particle Size Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaserParticleSizeMeasurement- Type
- Class, Measurement
- altLabel
- laser diffraction particle size analysis; laser particle sizer; particle size distribution
Laser particle sizing to determine powder particle size distribution (D50/median).
Laser Particle Sizer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaserParticleSizer- Type
- Class, Instrument
Instrument for laser-based particle size distribution measurement.
Laser Pulse Length
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaserPulseLength- Type
- Class, Characteristic
- altLabel
- pulse length
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time
Temporal duration of a laser pulse, measured using a stated criterion on its time-dependent intensity profile.
Laser Repetition Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaserRepetitionRate- Type
- Class, Characteristic
- altLabel
- repetition rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A quantitative characteristic specifying the change in laser repetition per stated unit of time or progression variable.
Laser Wavelength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaserWavelength- Type
- Class, Characteristic
- altLabel
- excimer laser wavelength; excitation wavelength; λ_laser
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the length of laser.
Laser Z Step
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LaserZStep- Type
- Class, Characteristic
- altLabel
- focusing height step; z-step
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying laser z step under the conditions and reference basis stated with the record.
Lateral Electronic Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LateralElectronicResistance- Type
- Class, Characteristic
- altLabel
- electronic resistance; four-probe resistance; lateral resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricResistance | http://qudt.org/vocab/unit/OHM
A property denoting in-plane/lateral electronic resistance of dry catalyst layer measured by four-probe I–V method (Ohm).
Lattice Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LatticeDiameter- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of lattice.
Lattice Distortion Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LatticeDistortionPercent- Type
- Class, Compatibility
- altLabel
- lattice distortion; lattice parameter distortion
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio | http://qudt.org/vocab/unit/PERCENT
A property denoting lattice distortion percent.
Lattice Height
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LatticeHeight- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying lattice height under the conditions and reference basis stated with the record.
Lattice Parameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LatticeParameter- Type
- Class, Characteristic
- altLabel
- fcc lattice parameter; lattice constant a; lattice parameter a
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying a length or angle that defines the translational unit cell of a crystal lattice.
Lattice Structure Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LatticeStructureSize- Type
- Class, Characteristic
- altLabel
- grid size; structure size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting macroscopic dimensions of printed/sintered grid structures (e.g., 15×15 mm before; 11.54×11.62 mm after).
Layer thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LayerThickness- Type
- Class, Characteristic
A length characteristic representing the separation between the bounding surfaces of a material layer.
- subclasses
- Aluminum Layer Thickness, Anode Catalyst Layer Thickness, Catalyst Layer Thickness, Cathode Catalyst Layer Thickness, Equivalent ionomer film thickness, Film Thickness, Gas Diffusion Layer Thickness, Initial ionomer film thickness, Ionomer Film Thickness, Ionomer Thin Film Thickness, Membrane Electrode Assembly Thickness, Membrane Porous Layer Thickness, Membrane Thickness, Microporous Layer Thickness, Printing Layer Thickness
Layer Thickness Analysis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LayerThicknessAnalysis- Type
- Class, Process
- altLabel
- thickness extraction
A post-processing analysis process that derives membrane or catalyst-layer thickness values from raw thickness-characterization outputs.
Layer-by-Layer Deposition
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LayerByLayerDeposition- Type
- Class, Manufacturing
- altLabel
- LBL deposition; layer-by-layer
A coating process that builds a film by repeated, separately controlled addition of successive layers.
Lead Bromide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LeadBromide- Type
- Class, Matter
Lead bromide used as halide source/ligand in solution-phase ligand exchange.
Lead Iodide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LeadIodide- Type
- Class, Matter
Lead iodide used as halide source/ligand in solution-phase ligand exchange.
LED luminous efficacy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LEDLuminousEfficacy- Type
- Class, Characteristic
A performance characteristic expressing the luminous flux produced by a light-emitting diode per unit electrical power consumed.
Li Cl To BI Molar Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LiClToBIMolarRatio- Type
- Class, Characteristic
- altLabel
- [LiCl]/[BI] molar ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
Amount ratio of lithium chloride to benzimidazole repeat units in the specified solution or formulation.
Li Cl To PBI Weight Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LiClToPBIWeightRatio- Type
- Class, Characteristic
- altLabel
- [LiCl]/[PBI] weight ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A dimensionless characteristic expressing the stated ratio identified as Li Cl To PBI Weight Ratio.
Ligand Density Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LigandDensityWeightPercent- Type
- Class, Characteristic
- altLabel
- ligand density (wt%); total ligand density; total ligand density of MSA capped QD
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting ligand mass fraction on QDs inferred from TGA weight loss.
Ligand Exchange Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LigandExchangeProcess- Type
- Class, Manufacturing
- altLabel
- MSA ligand exchange reaction; ligand exchange; surface ligand exchange
Process of exchanging native ligands on QDs with MSA; includes stirring and purification.
Ligand Exchange Reaction Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LigandExchangeReactionTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with ligand exchange reaction.
Light Intensity Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LightIntensityMeasurement- Type
- Class, Measurement
- altLabel
- projector intensity measurement
Measurement of DLP projector light intensity using a radiometer/photometer.
Light Source Power
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LightSourcePower- Type
- Class, Characteristic
- altLabel
- lamp power
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Power
A performance characteristic specifying the rate of energy transfer associated with light source.
Lignin Graphene Oxide Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LigninGrapheneOxideInk- Type
- Class, Matter
- altLabel
- GO-lignin ink; lignin-GO ink; lignin-graphene oxide solution
A material entity corresponding to a lignin graphene oxide ink and used as an input in Rheology Measurement and Direct Ink Writing.
Limit Of Linearity Strain
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LimitOfLinearityStrain- Type
- Class, Characteristic
- altLabel
- limit of linearity; limit strain of linearity; γ0
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Strain | http://qudt.org/vocab/unit/PERCENT
A property denoting strain amplitude where G′ deviates by >10% from plateau value (linear viscoelastic limit).
Limiting Current Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LimitingCurrentDataset- Type
- Class, Data
- altLabel
- Figure S7 limiting current; limiting current data; transport resistance data
Limiting current values and derived O2 transport resistances vs pressure and O2 concentration.
Limiting Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LimitingCurrentDensity- Type
- Class, Characteristic
- altLabel
- i_L; i_lim; limiting current
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity | http://qudt.org/vocab/unit/MilliA-PER-CentiM2
A property denoting limiting current density normalized to Geometric Area and determined in Oxygen Gain/Loss Measurement, Rotating Ring Disk Voltammetry, and Linear Sweep Voltammetry.
Limiting Current Density Loss Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LimitingCurrentDensityLossPercent- Type
- Class, Characteristic
- altLabel
- limiting current density decrease (%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting relative decrease (%) in limiting current density compared with ideal interface contact (e.g., due to MPL/CL interfacial voids).
Limiting Current Density Loss Percent After ADT
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LimitingCurrentDensityLossPercentAfterADT- Type
- Class, Characteristic
- altLabel
- limiting current density loss; loss in diffusion limiting current density
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting percent loss in LimitingCurrentDensity after ADT potential cycling.
Limiting Current Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LimitingCurrentMeasurement- Type
- Class, Measurement
- altLabel
- limiting current; limiting current measurements; oxygen limiting current
A limiting-current measurement performed under defined gas-side, thermal, humidity, pressure, and oxygen-transport operating conditions to quantify reactant transport constraints in the fuel-cell system.
Limiting ionomer alignment degree
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LimitingIonomerAlignmentDegree- Type
- Class, Characteristic
- notation
- deltaDA,inf
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for Limiting ionomer alignment degree; the curated source reports [-].
Limiting degree of ionomer molecular alignment in a thick film where the influence of the platinum-on-carbon surface is negligible.
Linear Shrinkage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LinearShrinkage- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
http://qudt.org/vocab/quantitykind/LengthFractionPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting linear shrinkage and determined in X Ray Computed Tomography Measurement.
Linear Shrinkage Height
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LinearShrinkageHeight- Type
- Class, Characteristic
- altLabel
- shrinkage in height direction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LengthFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting linear shrinkage (%) in specimen height from as-cured to pyrolyzed.
Linear Shrinkage Length
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LinearShrinkageLength- Type
- Class, Characteristic
- altLabel
- shrinkage in length direction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LengthFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting linear shrinkage (%) in specimen length from as-cured to pyrolyzed.
Linear Shrinkage Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LinearShrinkageMeasurement- Type
- Class, Measurement
Measurement of linear shrinkage (%) between as-cured and pyrolyzed flexural bars in height/width/length directions.
Linear Shrinkage Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LinearShrinkageWidth- Type
- Class, Characteristic
- altLabel
- shrinkage in width direction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LengthFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting linear shrinkage (%) in specimen width from as-cured to pyrolyzed.
Linear Stage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LinearStage- Type
- Class, Matter
- altLabel
- vertical z stage
A positioning device that translates a mounted object along one controlled linear axis.
Linear Sweep Voltammetry
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LinearSweepVoltammetry- Type
- Class, Measurement
- altLabel
- LSV; linear sweep; voltage sweep
A measurement process that uses linear sweep voltammetry to determine Current Density, Tafel Slope, and Overpotential using Electrochemical Workstation, Potentiostat, and RDERotator and generating Experiment Dataset and Polarization Curve Dataset.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0000028 (linear-sweep voltammetry)
Linoleic Acid Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LinoleicAcidMassFraction- Type
- Class, Characteristic
- altLabel
- Linoleic fatty acid%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting linoleic acid mass fraction and determined in Gas Chromatography Measurement.
Linolenic Acid Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LinolenicAcidMassFraction- Type
- Class, Characteristic
- altLabel
- Linolenic fatty acid%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting linolenic acid mass fraction and determined in Gas Chromatography Measurement.
Liquid Crystal Elastomer Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LiquidCrystalElastomerInk- Type
- Class, Compatibility
- altLabel
- LCE ink
A printable reactive formulation containing liquid-crystalline mesogenic components and network-forming constituents that forms a liquid-crystal elastomer upon curing.
Liquid Ethane Plunge Freezing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LiquidEthanePlungeFreezing- Type
- Class, Manufacturing
- altLabel
- immersion freezing into liquid ethane; plunge freezing; rapid freezing by liquid ethane
Specimen preparation step: plunge/immersion freezing of TEM grids into liquid ethane to vitrify the ink/dispersion and avoid ice-crystal artifacts.
Liquid Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LiquidFlowRate- Type
- Class, Characteristic
- altLabel
- anode feed flow rate; flow rate; ink flow rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumetricFlowRate
A transport characteristic specifying the quantity of liquid passing a reference boundary per unit time.
Liquid Nitrogen Freezing Treatment
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LiquidNitrogenFreezingTreatment- Type
- Class, Manufacturing
- altLabel
- LN_1–LN_4 treatment; liquid nitrogen freezing method
Cryogenic release step: liquid nitrogen scattered over MEA just before peeling decal substrate to improve transfer yield.
Liquid Phase Exfoliation Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LiquidPhaseExfoliationProcess- Type
- Class, Manufacturing
- altLabel
- liquid–phase exfoliation
Exfoliation of SN into few-layer nanosheets using ultrasonication in ethanol.
Liquid State Ligand Exchange
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LiquidStateLigandExchange- Type
- Class, Manufacturing
- altLabel
- solution-phase ligand exchange
Ligand exchange performed in solution phase to create CQD inks (phase transfer approach).
Literature Microstructure Compilation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LiteratureMicrostructureCompilation- Type
- Class, Process
- altLabel
- review compilation
An analysis that extracts and compiles reported microstructural descriptors from literature sources while retaining material identity, measurement method, conditions, and provenance.
Literature Review Synthesis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LiteratureReviewSynthesis- Type
- Class, Process
- altLabel
- literature review; literature synthesis; review synthesis
An analysis that integrates and compares published evidence to produce a structured synthesis of findings, trends, or quantitative ranges with source provenance.
Lithium Chloride
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LithiumChloride- Type
- Class, Matter
Not found in ONTOLOGY.jsonld; used as dispersing/foaming agent in catalyst ink.
Local Gas Transport Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LocalGasTransportResistance- Type
- Class, Compatibility
- altLabel
- R_Local; local mass transport resistance; local transport resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassTransportResistance | http://qudt.org/vocab/unit/OHM
A property denoting local gas transport resistance normalized to Geometric Area and determined in Oxygen Gain/Loss Measurement and Limiting Current Measurement.
Local Oxygen Transport Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LocalOxygenTransportResistance- Type
- Class, Compatibility
- altLabel
- local O2 diffusion resistance; local O2 diffusion resistance at Pt sites; pressure-independent O2 resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Resistance | http://qudt.org/vocab/unit/OHM
A property denoting local oxygen transport resistance normalized to Geometric Area and determined in Oxygen Gain/Loss Measurement, O2–N2 Switching Measurement, and Through-Plane Gas Transport Measurement.
Local Oxygen Transport Resistance Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LocalOxygenTransportResistanceDataset- Type
- Class, Data
- altLabel
- compiled datasets; oxygen transport resistance components dataset
A dataset containing local oxygen transport resistance data generated by Oxygen Gain/Loss Measurement and Limiting Current Measurement.
Log Normal Standard Deviation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LogNormalStandardDeviation- Type
- Class, Compatibility
- altLabel
- σ_lognormal
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A statistical characteristic that represents log normal standard deviation for a material, component, process, measurement, or hydrogen-electrochemical system.
Loss Modulus
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LossModulus- Type
- Class, Characteristic
- altLabel
- G''; loss modulus G″; viscous modulus
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LossModulus
A property denoting loss modulus (G″) characterizing ink viscous dissipation under oscillatory shear.
Low Activity Pt Particle Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LowActivityPtParticleFraction- Type
- Class, Characteristic
- altLabel
- fraction of Pt particles (low activity); fraction of Pt particles with low activity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Fraction
A property denoting fraction of Pt particles in a specified low current-density interval (paper reports 41% in 200–800 A·m_Pt^-2 for structure 2).
Lower Potential Limit
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LowerPotentialLimit- Type
- Class, Characteristic
- altLabel
- lower limit; lower limit potential; lower potential
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
An electrochemical characteristic specifying lower potential limit under the conditions and reference basis stated with the record.
LSTM Model
- IRI
https://w3id.org/h2kg/hydrogen-ontology#LSTMModel- Type
- Class, ModelArtifact
- altLabel
- LSTM
A recurrent neural-network model that uses gated memory-cell states to retain, update, and expose information during processing of sequential data.
m PBI
- IRI
https://w3id.org/h2kg/hydrogen-ontology#mPBI- Type
- Class, Matter
Meta-polybenzimidazole, an aromatic polybenzimidazole containing meta-phenylene linkages between benzimidazole-containing structural units.
Machine-learning model
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MachineLearningModel- Type
- Class, ModelArtifact
A model artifact whose behavior is learned from data through a machine-learning procedure.
Macropore Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MacroporeDiameter- Type
- Class, Characteristic
- altLabel
- macropore size; macropores
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting macropore diameter and determined in Mercury Intrusion Porosimetry Measurement.
Macropore Volume Per Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MacroporeVolumePerMass- Type
- Class, Characteristic
- altLabel
- macropore volume
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SpecificVolume
A property denoting macropore volume of carbon xerogel normalized by mass (cm³ g⁻¹).
Magnetic Field Strength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MagneticFieldStrength- Type
- Class, Compatibility
- altLabel
- magnetic field
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MagneticFluxDensity
A mechanical characteristic that represents magnetic field strength for a material, component, process, measurement, or hydrogen-electrochemical system.
Magnetic Stirrer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MagneticStirrer- Type
- Class, Instrument
- altLabel
- magnetic bar; magnetic stirring; stirred
An instrument corresponding to a magnetic stirrer and used in Catalyst Ink Preparation.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/equipment#AFE_0000374 (magnetic stirrer)
Magnetic-field characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MagneticFieldCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing the magnitude, direction, gradient, or spatial distribution of a magnetic field.
Magnification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Magnification- Type
- Class, Characteristic
- altLabel
- SEM magnification; TEM magnification; image magnification
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS
A quantitative characteristic specifying magnification under the conditions and reference basis stated with the record.
Manganese Dioxide Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ManganeseDioxideCatalyst- Type
- Class, Matter
Manganese dioxide cathode catalyst (non-precious), mixed with carbon (BP2000) for air cathode.
Manufacturing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Manufacturing- Type
- Class, Manufacturing
A process that intentionally prepares, modifies, joins, or assembles matter to produce a material, specimen, component, or device.
Manufacturing instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ManufacturingInstrument- Type
- Class, Instrument
An instrument used to prepare, transform, deposit, shape, assemble, or condition matter during a manufacturing process.
Manufacturing Throughput Increase Factor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ManufacturingThroughputIncreaseFactor- Type
- Class, Characteristic
- altLabel
- throughput increase; throughput increase factor
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
Ratio of manufacturing throughput for the investigated process to throughput for a declared reference process, calculated using the same output measure and time basis.
Mass Activity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassActivity- Type
- Class, Characteristic
- altLabel
- A/mg_PGM; ORR mass activity; i_m
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentPerMass
Electrochemical reaction current divided by the mass of the explicitly specified catalyst or active-metal reference material, measured at a stated potential and conditions.
Mass Activity Loss Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassActivityLossPercent- Type
- Class, Characteristic
- altLabel
- Mass activity loss
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting percent loss of mass activity (durability metric).
Mass Flow Controller
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassFlowController- Type
- Class, Instrument
- altLabel
- MFC; flow controller; gas flow controllers
An instrument corresponding to a mass flow controller and used in MEAPolarization, Spray Coating, and Fuel Cell Test Station.
Mass Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassFlowRate- Type
- Class, Characteristic
- altLabel
- flow rate; mass flow rate H2; nL/min
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFlowRate
A transport characteristic specifying the quantity of mass passing a reference boundary per unit time.
Mass Fractal Dimension
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassFractalDimension- Type
- Class, Characteristic
- altLabel
- catalyst ink (nm) fractal dimension; d_f; fractal dimension
- QUDT guidance
- http://qudt.org/vocab/quantitykind/FractalDimension
The exponent relating aggregate mass to characteristic size through a power law over a specified scale range, estimated using a stated structural or scattering model.
Mass Loss Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassLossFraction- Type
- Class, Characteristic
- altLabel
- mass loss
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting fractional mass loss during pyrolysis (reported ~30% mass loss in conclusions).
Mass To Charge Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassToChargeRatio- Type
- Class, Characteristic
- altLabel
- m/z
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassToChargeRatio
A property denoting mass to charge ratio and determined in Gas Chromatography Mass Spectrometry Measurement.
Mass Transport Loss Parameter M
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassTransportLossParameterM- Type
- Class, Characteristic
- altLabel
- m (V); m parameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Voltage | http://qudt.org/vocab/unit/V
An empirical model coefficient controlling the magnitude of the mass-transport voltage-loss term in the associated polarization model.
Mass Transport Loss Parameter N
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassTransportLossParameterN- Type
- Class, Characteristic
- altLabel
- n (cm2/mA); n parameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerCurrent
An empirical model coefficient controlling the current-density dependence of the mass-transport voltage-loss term in the associated polarization model.
Mass Transport Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassTransportResistance- Type
- Class, Characteristic
- altLabel
- molecular diffusion resistance; molecular diffusion resistance (secondary pores); pressure-dependent O2 resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Resistance | http://qudt.org/vocab/unit/OHM
A property denoting mass transport resistance normalized to Geometric Area and determined in Through-Plane Gas Transport Measurement, MEAPolarization, and Electrochemical Impedance Spectroscopy Potentiostatic.
Mass Transport Resistance Increase Due To Local Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassTransportResistanceIncreaseDueToLocalPercent- Type
- Class, Compatibility
- altLabel
- share attributed to local resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting mass transport resistance increase due to local percent.
Mass Transport Resistance Increase Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassTransportResistanceIncreasePercent- Type
- Class, Characteristic
- altLabel
- % increase; increase in total mass transport resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
The percentage increase in mass-transfer resistance relative to an identified reference state, equal to 100 times the difference between test and reference resistance divided by the reference resistance.
Mass Transport Resistance Reduction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassTransportResistanceReductionPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting percent reduction in fitted mass transport resistance relative to comparator (E-spun vs E-sprayed).
Mass-to-charge characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MassToChargeCharacteristic- Type
- Class, Characteristic
A quantitative characteristic expressing the ratio of an ion's mass to its electric charge number.
Material entity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MaterialEntity- Type
- Class, Matter
A matter entity whose identity and behavior are primarily determined by its material composition and structure.
- subclassOf / subPropertyOf
- Matter
- subclasses
- Activated Sludge, Air, Air Diffusion Layer, Alkali Lignin, Alkylpolyglycoside Surfactant, Aminoantipyrine, Aminopropyltriethoxysilane, Ammonia, Ammonium Acetate, Ammonium Carbonate, Ammonium Dihydrogen Phosphate, Argon, Argon Gas, Beta Ag 2 Se, Beta Si C Phase, Biodiesel, Biomass Precursor, Butylamine, Carbon material, Castor Oil, Catalyst material, Cd Se Zn S Quantum Dot, Chemical substance, CHOSPEEK 64, Composite material, Corn Starch, Cu 2 WS 4 Nanocubes, Cyclohexanol, Cyclopentanone, Dibutyl Phthalate, Dimethyl Sulfoxide, Dimethylacetamide, Dimethylformamide, Dipropyl Ketone, Dipropylene Glycol, DMAEMA Monomer, Docosyltriethoxysilane, Ebecryl 8804, Ebecryl 8807, EDDET, Electrolyte material, Epoxidized Castor Oil, Epoxidized Soybean Oil, ETFE Sheet Substrate, Ethane Cryogen, Ethyl Acetate, Ethylene Gas, Ethylene Glycol, Ethylene Glycol Butyl Ether, Ethylene Glycol Diethyl Ether, Ethylene Glycol Dimethyl Ether, Fe 2 O 3 Powder, Fe Powder, Ferritin, Ferritin Surfactant Micelle Complex, Flow Channel, Flow Field, Formaldehyde, FTO Glass Substrate, Furfural, Geopolymer Powder Filler, Glucose, Glycerol, Glycidyl Methacrylate, Halloysite Nanoclay, Helium, Heptanol, Hexane, Hexylamine, HOSPEEK 64, Hydrazine, Impregnated Support, Ionic Liquid Additive, Irgacure 819, Irgacure Oxe 02, Iron Acetate, Iron II Ichloride Hexahydrate, Iron III Nitrate Nonahydrate, Isodecyl Acrylate, Isopropanol, Jeffamine M 2005, Kapton Film, La B 6 Calibration Standard, Lead Bromide, Lead Iodide, Lithium Chloride, m PBI, MES Buffer, Metakaolin, Metal material, Methane, Methyl Ethyl Ketone, Methylene Blue, Methylene Chloride, Microfilament, Mixed Alkali Geopolymer Lattice, Mixture, Mo O 3 Powder, Mo Powder, Mo S 2 Nanosheets, Mo S 2 Ni Fe 2 O 4 Nanohybrid, MSA Capped Quantum Dot, Mu Phase, N 719 Dye, n Butyl Acetate, N Methyl 2 Pyrrolidone, Nb B 2 Support, NCNT Fs Support, Ni Fe 2 O 4 Nanostructure, Ni O Powder, Ni Powder, Nitrocellulose Varnish, Oxide material, Pb S Quantum Dot, PBI 11, PBI 174, PBI 46, PBI 90, PDL, Pemion HNN 8, Pemion PP 1 HNN 4 00 X, Pemion PP 1 HNN 9 00 X, PET Nonwoven, PET Substrate, Phosphate Buffered Saline, Photoinitiator 184, Photoinitiator TPOL, Pigment Cyan 153, PIM 1, PIM Tz, PIMAO, PIMCONH 2, PIMCOOH, Plasticizer ATBC, PLGA, Poly L Lysine, Polybenzimidazole, Polydimethylsiloxane, Polyethersulfone, Polyhedral Oligomeric Silsesquioxane, Polymer material, Polyvinylidene Fluoride, Polyvinylpyrrolidone, Potassium Geopolymer Lattice, Potassium Iodide, Potassium Persulfate Initiator, Potassium Phosphate Buffer, Potassium Sodium Tartrate, Potassium Sulfate, Printed Ferritin Pre Catalyst Pattern, Printed Green Part, Printed Grid Structure, Printed Pillar Array, Propylene Glycol 12, Propylene Glycol 13, Propylene Glycol Monomethyl Ether, Propylene Glycol Monomethyl Ether Acetate, Protic Ionic Liquid Grafted Polybenzimidazole, Proton Conduct Layer, Pseudo Boehmite, Pt 111 Surface, Pyrex Glass, Quantum Dot, Quantum Dot Photoresist, Quartz Capillary, Reaction Layer, Rhodamine B, RM 257, s PPB, Sawdust, Sawdust Derived Biochar, Selenium Powder, Sesbania Powder, Si OC Ceramic, Silicon Calibration Standard, Silicon Carbide Chopped Fiber, Silicon Dioxide, Silicon Wafer Substrate, Silicone Caulk, Sodium Acetate, Sodium Carbonate, Sodium Dodecyl Benzene Sulfonate, Sodium Dodecyl Sulfate, Sodium Geopolymer Lattice, Sodium Lauryl Sulfonate, Soybean Oil, St Co DMAEMA Oligomer, Styrene Monomer, Sudan I, Sulfolene, Sulfonated Poly Ether Ether Ketone, Sulfonated Polysulfone, Support Material, Tetrabutylammonium Acetate, Tetraethoxysilane, Tetrahydrofuran, Tetrahydrofurfural, Thermanox Substrate, Titanium Screen, Titanium Substrate, Toluene, Triethylamine, Trimethoxysilylpropyl Methacrylate, Trimethylolpropane Triacrylate, Triple Phase Boundary Layer, Tripropylamine, Triton X 100 Surfactant, Urea, Vermiculite, ZIF 67, Zirconium Diboride Powder
Mappings
- skos:exactMatch
http://biomodels.net/SBO/SBO_0000240 (material entity) - skos:exactMatch
http://purl.obolibrary.org/obo/BFO_0000040 (material entity)
Material processing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MaterialProcessing- Type
- Class, Manufacturing
A manufacturing process that changes the composition, structure, state, geometry, or arrangement of a material.
- subclasses
- Acid Doping, Acid Etching Process, Acid Leaching Process, Acid Treatment Of CCM, Air Breathing Cathode Fabrication, Amine Hydrolysis Process, Boiling Pretreatment, Carbon Pretreatment Process, Carbothermal Graphitization Annealing, Catalyst Impregnation, Catalyzed Diffusion Medium Method, Centrifugation Process, Chemical reaction process, Co Reduction Process, Coating or deposition process, Cold Isostatic Pressing Process, Colloidal Silica Impregnation, Continuous Mode Printing, Cutting or machining process, Debinding Process, Decal Transfer, Dialysis Purification Process, Direct Ink Writing, DLP Printing, Dye Sensitization Process, Electrode Sintering, Electroless Copper Plating Process, Filament On Demand Mode, Formulation process, Gas Diffusion Electrode Method, High Shear Mixing, Hot Pressing, Hybrid DLPDIW Printing, Hydrogen Reduction, Ink Degassing, Ink Extrusion Process, Ink Ultrasonication, Inkjet Printing, Inkjet Printing Process, KOH Soaking Pretreatment, Ligand Exchange Process, Liquid Ethane Plunge Freezing, Liquid Nitrogen Freezing Treatment, Liquid Phase Exfoliation Process, Liquid State Ligand Exchange, Membrane Immobilization On Pyrex Glass, Milling process, Oxygen Plasma Treatment, Pellet Compression Process, Phosphoric Acid Doping, Photolithography Patterning, Plasma Etching, Pre Carbonization Process, Pressure Bonding Electrode Preparation, Profilometry Sample Preparation, Pyrolysis Process, Roll To Roll Production, Sacrificial Support Method, Screen Printing, Selective Coaxial Ink 3 D Printing, Shear Mixing Process, Silane Condensation Functionalization, Silica Template Etching, Sintering Process, Sol Gel Modification Process, Solid State Ligand Exchange, Solvent Engineering, Solvent Evaporation by Rotavapor, Solvent Evaporation Thickening, Solvent Free Shearing Graphitization Process, Steam Activation Process, Steam Pretreatment, Synthesis process, Thermal Crosslinking, Thermal Decomposition Electrode Preparation, Thermal Oxidation Of Aluminum Film, Thermal treatment process, Ti Cl 4 Surface Treatment, Ultrasonic Liquid Exfoliation, Uniaxial Pressing Process, UV Assisted Direct Ink Writing, Vacuum Encapsulation Process, Vacuum Filtration Process, Water Assisted Low Pressure CVD, Wet Co Impregnation
Material Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MaterialSpecification- Type
- Class, Specification
- altLabel
- sheet resistance specification
A specification of material identity and selected characteristics or requirements, such as composition, grade, form, dimensions, or declared performance values.
Material Specification Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MaterialSpecificationMeasurement- Type
- Class, Process
- altLabel
- material specification; materials specification
An information-extraction analysis that records material specifications reported by an author or manufacturer together with their values, applicable conditions, and sources.
MATLAB Software
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MATLABSoftware- Type
- Class, SoftwareArtifact
- altLabel
- MATLAB®
A scientific software platform that provides a programming and numerical-computing environment for data analysis, visualization, algorithm development, and model implementation.
Matter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Matter- Type
- Class, Matter
A physical entity that can participate in a hydrogen-electrochemical process, measurement, or system configuration.
Mappings
- skos:exactMatch
http://emmo.info/emmo#EMMO_5b2222df_4da6_442f_8244_96e9e45887d1 (Matter)
Max Adsorption Volume Nitrogen
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MaxAdsorptionVolumeNitrogen- Type
- Class, Compatibility
- altLabel
- maximum adsorption volume (N2)
A property denoting maximum N2 adsorption volume (proxy for pore volume).
Max Adsorption Volume Water
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MaxAdsorptionVolumeWater- Type
- Class, Compatibility
- altLabel
- maximum adsorption volume (H2O)
A property denoting max adsorption volume water.
Maximum Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MaximumCurrentDensity- Type
- Class, Characteristic
- altLabel
- max current density; short circuit current density
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity
A property denoting maximum current density and determined in MEAPolarization, Microbial Fuel Cell Polarization Measurement, and Fuel Cell Polarization Measurement.
Maximum Particle Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MaximumParticleVolumeFraction- Type
- Class, Characteristic
- altLabel
- maximum volume fraction; φ_max
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
The maximum-packing particle volume-fraction parameter in a specified suspension-viscosity model, representing the model's limiting packing fraction at which the predicted viscosity diverges.
Maximum Reduction Conversion Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MaximumReductionConversionRate- Type
- Class, Characteristic
- altLabel
- %/K; maximum conversion rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ConversionRatePerTemperature
A property denoting maximum rate of oxide-to-metal conversion derived from normalized XRD peak intensity change (units %/K).
MEA Assembly
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MEAAssembly- Type
- Class, Matter
- altLabel
- MEA
A material entity corresponding to a membrane electrode assembly and used as an input in electrochemical impedance spectroscopy, fuel-cell polarization measurement, and related electrochemical testing.
MEA Assembly Gap
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MEAAssemblyGap- Type
- Class, Characteristic
- altLabel
- constant gap; hot-press gap
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying mea assembly gap under the conditions and reference basis stated with the record.
MEA Assembly Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MEAAssemblyProcess- Type
- Class, Manufacturing
- altLabel
- MEA assembly
Manufacturing step that assembles catalyst-coated membranes, gas diffusion layers, and sealing components into a membrane electrode assembly ready for single-cell testing.
MEA Durability Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MEADurabilityMeasurement- Type
- Class, Measurement
Fuel-cell durability/stability measurement in MEA under constant applied voltage (0.4 V) with current monitored vs time.
MEA Polarization
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MEAPolarization- Type
- Class, Measurement
An electrochemical measurement performed on a membrane electrode assembly to determine the relation between cell voltage and current density under specified operating conditions.
Mean Absolute Percentage Error
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MeanAbsolutePercentageError- Type
- Class, Characteristic
- altLabel
- MAPE
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A property denoting prediction performance metric: mean absolute percentage error between measured and predicted voltage.
Mean Fiber Orientation Angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MeanFiberOrientationAngle- Type
- Class, Characteristic
- altLabel
- average fiber angle; fiber alignment angle
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle
A property denoting mean fiber orientation angle (degrees) measured from XCT images relative to print direction.
Mean Flow Pore Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MeanFlowPoreDiameter- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting mean flow pore diameter and determined in Mercury Intrusion Porosimetry Measurement.
Mean Particle Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MeanParticleSize- Type
- Class, Characteristic
- altLabel
- aggregate size; average particle size; particle size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting mean particle size or aggregate size determined by particle-sizing and microscopy workflows, including laser diffraction and atomic force microscopy.
Mappings
- skos:broadMatch
https://openenergyplatform.org/ontology/oeo/OEO_00340068 (size) - skos:broadMatch
https://saref.etsi.org/saref4inma/Size (Size) - skos:broadMatch
https://w3id.org/nfdi4cat/voc4cat_0008212 (particle size)
Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Measurement- Type
- Class, Measurement
A process that acquires observations or data to determine or estimate a characteristic of a material, component, process, or system.
Measurement Gap
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MeasurementGap- Type
- Class, Characteristic
- altLabel
- doctor blade gap; gap (rheometer); gap between plates
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying measurement gap under the conditions and reference basis stated with the record.
Measurement instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MeasurementInstrument- Type
- Class, Instrument
An instrument used to impose measurement conditions, interact with a measurement subject, or acquire scientific observations.
- subclasses
- Analytical Balance, Analytical Centrifuge, BET Analyzer, BET Surface Analyzer, Contact Angle Goniometer, Cryostat, Data Acquisition Computer, Differential Scanning Calorimeter, Diffraction instrument, Digital Balance, Digital Caliper, Digital Multimeter, DLS Instrument, DSC Instrument, Dynamic Light Scattering Instrument, Electric Load, Electrochemical test instrument, ELS Instrument, Environmental Chamber, Fiber Optic Oxygen Probe, Gas Adsorption Analyzer, Gas Chromatograph, Gas Chromatograph FID, Gas Chromatography Instrument, Gas Sorption Analyzer, GCMS Instrument, Gel Permeation Chromatography Instrument, Gloss Meter, Gold Plated Probes, Hall Measurement System, Helium Pycnometer, High Speed Video Camera, High Voltage Power Supply, Humidity Sensor, ICP Instrument, ICPAES Instrument, Imaging instrument, Infrared Camera, Karl Fischer Titrator, Kookaburra USANS Instrument, Laser Diffraction Particle Size Analyzer, Laser Particle Sizer, Mechanical Actuation Bioreactor, Mechanical test instrument, Mercury Porosimeter, Micro Ohm Meter, Microbalance, Micrometer, Milli Ohmmeter, Mythen II Array Detector, Neutron Scattering Instrument, Nitrogen Adsorption Analyzer, Olympus LEXTOLS 5000, Optical Surface Profiler, pH Meter, Quartz Crystal Microbalance, Quokka SANS Instrument, Radiometer Photometer, RDE Rotator, Rheometer, Solar Simulator IV Tester, Spectroscopy instrument, Static Testing Machine, Synchronous Thermal Analyzer, Tack O Scope Instrument, Tensiometer, Thermogravimetric Analyzer, Thermometer, Through-Plane Transport Cell, Torque Wrench, Ubbelohde Viscometer, Universal Testing Machine, UV Detector, Veeco Dektak 8 Contact Profilometer, Visible Light Lamp, Voltage Sensor, Xenon Lamp, Zeta Potential Analyzer
Mechanical Actuation Bioreactor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MechanicalActuationBioreactor- Type
- Class, Instrument
- altLabel
- CellScale MCT6 bioreactor apparatus
Mechanical actuation system used to impose cyclic strain on sensor under simulated physiological conditions.
Mechanical characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MechanicalCharacteristic- Type
- Class, Characteristic
A property describing deformation, strength, stiffness, adhesion, hardness, or another mechanical response.
- subclasses
- Compressive Strength, Crush Strength, Flexural Strength, Limit Of Linearity Strain, Loss Modulus, Minimum Storage Modulus Requirement, Notched Izod Impact Toughness, Plateau Loss Modulus, Plateau Storage Modulus, Power Law Consistency Index, Power Law Flow Index, Rheological characteristic, Shear Strain, Shear Strain Sweep Max, Shear Strain Sweep Min, Shear Stress, Storage Modulus, Storage Modulus Increase Onset Time, Strain Gauge Factor, Tensile Strength, Thixotropy Hysteresis Area, Thixotropy Recovery Fraction, Working Time Deformation, Yield Stress, Youngs Modulus
Mechanical measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MechanicalMeasurement- Type
- Class, Measurement
A characterization measurement that determines mechanical response or a mechanical characteristic of a specimen or component.
Mechanical test instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MechanicalTestInstrument- Type
- Class, Instrument
A measurement instrument used to impose and record force, displacement, deformation, hardness, adhesion, or related mechanical response.
Membrane Area Expansion Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneAreaExpansionMeasurement- Type
- Class, Measurement
- altLabel
- area expansion measurement
A measurement process that uses membrane area expansion measurement to determine Membrane Area Expansion Percent.
Membrane Area Expansion Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneAreaExpansionPercent- Type
- Class, Characteristic
- altLabel
- membrane area expansion
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio | http://qudt.org/vocab/unit/PERCENT
A property denoting membrane area expansion percent and determined in Membrane Swelling Measurement and Membrane Area Expansion Measurement.
Membrane Bulk Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneBulkResistance- Type
- Class, Characteristic
- altLabel
- Rb; bulk resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricalResistance | http://qudt.org/vocab/unit/OHM
A property denoting bulk resistance of membrane/electrolyte from AC impedance with blocking electrodes (ohm).
Membrane Casting Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneCastingProcess- Type
- Class, Manufacturing
Casting/drying of polymer/filler solution to form membranes.
Membrane component
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneComponent- Type
- Class, Matter
An electrochemical component formed as a selective layer for ionic transport and separation of adjoining regions.
Membrane Electrode Assembly Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneElectrodeAssemblyThickness- Type
- Class, Characteristic
- altLabel
- MEA thickness
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/NanoM
A property denoting membrane-electrode-assembly thickness measured from cross-sectional microscopy, including ion-cut SEM and related electron microscopy workflows.
Membrane Immobilization On Pyrex Glass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneImmobilizationOnPyrexGlass- Type
- Class, Manufacturing
- altLabel
- bonded on flat pyrex glass; immobilized on pyrex glass
A manufacturing process for membrane immobilization on pyrex glass using Proton Exchange Membrane and Pyrex Glass.
Membrane Porous Layer Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembranePorousLayerThickness- Type
- Class, Characteristic
- altLabel
- porous layer thickness; porous layer thickness (membrane)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the distance between the opposing bounding surfaces of membrane porous layer.
Membrane Swelling Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneSwellingMeasurement- Type
- Class, Measurement
- altLabel
- swelling measurement; swelling ratio measurement; swelling ratio of membrane
A measurement that determines a membrane dimensional or volume change after solvent exposure relative to a defined reference state.
Membrane Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneThickness- Type
- Class, Characteristic
- altLabel
- membrane height; nominal thickness; state-of-the-art membrane
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A thickness characteristic representing the distance between the opposing bounding surfaces of an ion-conducting membrane.
Mappings
- skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0007262 (membrane thickness)
Membrane Thickness Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneThicknessMeasurement- Type
- Class, Measurement
- altLabel
- membrane thickness; membrane thickness spec; thickness measurement
Measurement/record of membrane thickness (e.g., micrometer); reported ~80 µm.
Membrane Type
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneType- Type
- Class, Characteristic
A categorical characteristic identifying membrane type under the conditions and reference basis stated with the record.
Membrane Volume Expansion Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneVolumeExpansionPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting percent change in membrane volume after PA doping.
Membrane-electrode assembly
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MembraneElectrodeAssembly- Type
- Class, Matter
A cell assembly comprising an ion-conducting membrane and adjoining electrode layers arranged for operation in a membrane-based electrochemical cell.
Mercaptopropionic Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MercaptopropionicAcid- Type
- Class, Matter
Thiol additive for ligand engineering to improve ink stability.
Mercaptosuccinic Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MercaptosuccinicAcid- Type
- Class, Matter
Carboxyl-terminated thiol ligand used to replace native ligands on QD surfaces.
Mercury Intrusion Porosimetry Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MercuryIntrusionPorosimetryMeasurement- Type
- Class, Measurement
- altLabel
- mercury intrusion; mercury intrusion porosimetry; mercury porosimetry
Mercury intrusion to quantify larger pore volume (>50 nm) in catalyst layers.
Mercury Intrusion Porosimetry Measurement 3
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MercuryIntrusionPorosimetryMeasurement3- Type
- Class, Compatibility
- altLabel
- Mercury Porosimeter
A porosimetry measurement used to perform or support mercury intrusion porosimetry measurement 3 in a scientific workflow.
Mercury Intrusion Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MercuryIntrusionPressure- Type
- Class, Characteristic
- altLabel
- pressure max; pressure min
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A pressure characteristic specifying the pressure associated with mercury intrusion.
Mercury Mercury Oxide Reference Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MercuryMercuryOxideReferenceElectrode- Type
- Class, Instrument
- altLabel
- Hg/HgO reference electrode
An instrument corresponding to a mercury mercury oxide reference electrode.
Mercury Porosimeter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MercuryPorosimeter- Type
- Class, Instrument
- altLabel
- Pascal 240 porosimeter (Thermo Electron – Porotec); Quantachrome mercury porosimeter; mercury intrusion porosimeter
Instrument for mercury intrusion porosimetry
Mercury Sulfate Reference Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MercurySulfateReferenceElectrode- Type
- Class, Compatibility
- altLabel
- Hg/Hg2SO4 reference electrode
A reference electrode comprising mercury in contact with mercurous sulfate (Hg₂SO₄) and a sulfate-containing electrolyte, whose equilibrium electrode potential depends on electrolyte composition and temperature.
MES Buffer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MESBuffer- Type
- Class, Matter
- altLabel
- MES
Buffer used during catalyst suspension and rebinding/incubation steps.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001760 (MES buffer)
Mesopore Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MesoporeDiameter- Type
- Class, Characteristic
- altLabel
- pore diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of mesopore.
Mesopore Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MesoporeVolume- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumePerMass
Volume of pores with widths approximately 2–50 nm, per unit sample mass when reported as specific pore volume, determined using a stated pore-size analysis method.
Mesoporous Carbon Support
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MesoporousCarbonSupport- Type
- Class, Matter
- altLabel
- MgO-templated mesoporous carbon; mesoporous carbon; porous carbon
Carbon support with mesoporous/nanoporous structure used for Pt/MPC catalysts; large (~1 µm) primary particles.
Metadata
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Metadata- Type
- Class, Metadata
Data that describes the identity, context, provenance, structure, management, or interpretation of another entity.
- subclassOf / subPropertyOf
- Data
Metakaolin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Metakaolin- Type
- Class, Matter
Aluminosilicate precursor powder (metakaolin) mixed with activating solution to form geopolymer.
Metal Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MetalAtomicPercent- Type
- Class, Characteristic
- altLabel
- Metal %
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting atomic percent of transition metal from XPS survey/high-resolution spectra (as reported).
Metal Coordinated Nitrogen Fraction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MetalCoordinatedNitrogenFractionPercent- Type
- Class, Characteristic
- altLabel
- Nx-M; nitrogen coordinated with metal
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting percent of N 1s assigned to nitrogen coordinated to metal (Nx-M).
Metal Mass Per Oil Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MetalMassPerOilMass- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A quantitative characteristic specifying the mass of metal mass per oil.
Metal material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MetalMaterial- Type
- Class, Matter
A material entity whose functional composition contains a metallic element or alloy as a principal constituent.
- subclasses
- Aluminum Foil, Aluminum Foil Substrate, Aluminum Substrate, Aluminum Thin Film Layer, Copper Film, Fe 20 Ni 5 Mo Alloy, Fe 20 Ni Alloy, Nickel Foam, Nickel Plate Substrate, Palladium Nanoparticles, Platinum, Silver Foil, Silver Nanowire
Metal Nx Fraction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MetalNxFractionPercent- Type
- Class, Characteristic
- altLabel
- M-Nx; metal-nitrogen coordination fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction/percent of metal present as M-Nx coordinated species (as reported).
Metal Oxide Fraction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MetalOxideFractionPercent- Type
- Class, Characteristic
- altLabel
- MOx; metal oxides fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction/percent of metal present as metal oxides (as reported).
Metal Powder Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MetalPowderInk- Type
- Class, Matter
- altLabel
- elemental powder ink; metal-based ink
PowderInk formulated with elemental metallic powders (Fe, Ni, Mo).
Metal-oxide material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MetalOxideMaterial- Type
- Class, Matter
A material entity containing a metal oxide as a principal functional constituent or phase.
- subclasses
- Alumina, Alumina Milling Media, Cobalt II Oxide Co O, Cobalt Oxide Co 3 O 4, Iron Oxide Fe 3 O 4, La Ni O 3 Perovskite Oxide, Nickel Cobaltite Spinel Ni Co 2 O 4, Nickel Oxide, Porous Alumina Ceramic Carrier, Titanium Oxide Layer, Zirconia Milling Balls
Metallic Metal Fraction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MetallicMetalFractionPercent- Type
- Class, Characteristic
- altLabel
- Metal; metallic particles fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction/percent of metal present as metallic species in XPS metal spectrum fitting (as reported).
Methane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Methane- Type
- Class, Matter
Reactant gas for dry reforming of methane.
Mappings
- skos:exactMatch
https://openenergyplatform.org/ontology/oeo/OEO_00000025 (methane) - skos:narrowMatch
http://purl.allotrope.org/ontologies/material#AFM_0001118 (methane gas)
Methane Conversion
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MethaneConversion- Type
- Class, Characteristic
- altLabel
- CH4 conversion; X_CH4
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ConversionFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting methane conversion and determined in Dry Reforming Of Methane Performance Measurement.
Methanol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Methanol- Type
- Class, Matter
- altLabel
- methanol aqueous solution; methanol fuel; methyl alcohol
A material entity corresponding to a methanol and used as an input in Catalyst Ink Preparation, Linear Sweep Voltammetry, and Solvent Property Lookup.
Methanol Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MethanolConcentration- Type
- Class, Characteristic
- altLabel
- MeOH; [CH3OH]; methanol conc.
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarConcentration
A composition characteristic specifying the amount of methanol per stated quantity of mixture or solution.
Methanol Excess Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MethanolExcessPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A composition characteristic expressing the stated fractional composition identified as Methanol Excess Percent.
Methanol Oxidation Reaction Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MethanolOxidationReactionMeasurement- Type
- Class, Measurement
- altLabel
- MOR
Electrochemical methanol oxidation measurement used as sensing/electrocatalysis readout.
Methanol Permeability
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MethanolPermeability- Type
- Class, Characteristic
- altLabel
- P
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PermeabilityCoefficient
A property denoting methanol permeability and determined in Methanol Permeability Measurement.
Methanol Permeability Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MethanolPermeabilityMeasurement- Type
- Class, Measurement
- altLabel
- methanol permeability
Measurement of methanol permeability through membrane; method not specified in paper.
Methanol Volume Per Oil Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MethanolVolumePerOilVolume- Type
- Class, Characteristic
- altLabel
- methanol:oil
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeRatio
A geometric characteristic specifying the three-dimensional volume occupied by methanol volume per oil.
Methyl Ethyl Ketone
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MethylEthylKetone- Type
- Class, Matter
- altLabel
- MEK
Butanone/MEK co-solvent used for CQD ink solvent engineering.
Methylene Blue
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MethyleneBlue- Type
- Class, Matter
- altLabel
- MB; methylene blue dye
Organic dye pollutant used as model stain for self-cleaning photodegradation tests.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_6872 (methylene blue)
Methylene Chloride
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MethyleneChloride- Type
- Class, Matter
Solvent used to dissolve PLGA and suspend powders in ink.
Methylimidazole
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Methylimidazole- Type
- Class, Compatibility
A material entity used for methylimidazole.
Meyer Rod Coating
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MeyerRodCoating- Type
- Class, Manufacturing
- altLabel
- Meyer rods; bar coating; contact coating
Wire-wound rod coating process used to deposit MPL ink onto carbon fiber paper substrate.
Mg Content Wt
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MgContentWt- Type
- Class, Characteristic
- altLabel
- Mg content; wt.% Mg
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting magnesium weight percent in LDH (from ICP-AES).
Micro Ohm Meter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroOhmMeter- Type
- Class, Instrument
An instrument corresponding to a micro ohm meter and used in In Plane Electronic Conductivity Measurement and Through Plane Electronic Conductivity Measurement.
Micro X Ray Fluorescence Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroXRayFluorescenceMeasurement- Type
- Class, Measurement
- altLabel
- X-ray fluorescence; X-ray fluorescence (XRF); micro X-ray fluorescence spectroscopy
Measurement activity to determine Pt loading via μXRF (instrument exists in ontology, measurement class not found).
Micro X Ray Fluorescence Spectrometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroXRayFluorescenceSpectrometer- Type
- Class, Instrument
- altLabel
- FISCHERSCOPE X-RAY XDV-SDD; XRF spectrometer; micro X-ray fluorescence
An instrument corresponding to a micro X ray fluorescence spectrometer and used in Micro X Ray Fluorescence Measurement and Catalyst Loading Determination.
Microbalance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Microbalance- Type
- Class, Instrument
Microbalance used to weigh Pt loadings.
Microbial Fuel Cell Polarization Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicrobialFuelCellPolarizationMeasurement- Type
- Class, Measurement
Polarization/power-curve measurement of a microbial fuel cell (MFC) from open-circuit voltage to 0 mV, used to compute current density and peak power density.
Microelectrode Water Electrolyzer Polarization Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroelectrodeWaterElectrolyzerPolarizationMeasurement- Type
- Class, Measurement
- altLabel
- water-splitting performance on IDE microelectrodes
Polarization curves (0–4.5 V) on interdigitated microelectrodes to evaluate ohmic and mass-transport limits of electrolyte thin films.
Microfilament
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Microfilament- Type
- Class, Matter
1D extruded filament (typically <200 μm diameter) printed from powder-loaded ink.
Microfilament Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicrofilamentDiameter- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting diameter of printed/sintered microfilament.
Micrometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Micrometer- Type
- Class, Instrument
An instrument corresponding to a micrometer and used in Catalyst Layer Thickness Measurement and Film Thickness Measurement.
Micropipette
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Micropipette- Type
- Class, Compatibility
- altLabel
- glass micropipette tip; micro-pipet; micropipette tip
Ink dispensing tip used to deposit catalyst-ionomer ink onto membrane in automated deposition system.
Micropore Size Max
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporeSizeMax- Type
- Class, Compatibility
- altLabel
- µm-scale pores max
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting upper bound of reported µm-scale pore size tunability range (10–20 µm).
Micropore Size Min
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporeSizeMin- Type
- Class, Compatibility
- altLabel
- µm-scale pores min
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting lower bound of reported µm-scale pore size tunability range (10–20 µm).
Micropore Surface Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporeSurfaceArea- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerMass
A property denoting micropore surface area and determined in Literature Review Synthesis.
Micropore Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporeVolume- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumePerMass
http://qudt.org/vocab/quantitykind/VolumePerMass
A property denoting pore volume attributed to micropores (<2 nm in cited convention); reported/compared in cm^3/g.
Microporous Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporousLayer- Type
- Class, Matter
- altLabel
- microporous coating; microporous layer (middle layer)
Carbon/PTFE microporous layer deposited on GDL prior to catalyst layer.
Microporous Layer Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporousLayerInk- Type
- Class, Matter
- altLabel
- MPL ink; conductive ink; ink slurry
A fluid dispersion formulated for deposition and drying to form a microporous layer in an electrochemical gas-diffusion medium.
Microporous Layer Permeability
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporousLayerPermeability- Type
- Class, Characteristic
- altLabel
- KMPL; MPL permeability
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Permeability
A transport characteristic specifying microporous layer permeability under the conditions and reference basis stated with the record.
Microporous Layer Porosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporousLayerPorosity- Type
- Class, Characteristic
- altLabel
- MPL porosity; porosity of MPL; ε_MPL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A morphological characteristic describing microporous layer porosity under the conditions and reference basis stated with the record.
Microporous Layer Presence
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporousLayerPresence- Type
- Class, Characteristic
- altLabel
- MPL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS
A categorical characteristic identifying microporous layer presence under the conditions and reference basis stated with the record.
Microporous Layer Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporousLayerThickness- Type
- Class, Characteristic
- altLabel
- MPL thickness; thickness difference between GDM and MPS
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting through-plane thickness of the microporous layer (MPL) on the macroporous substrate.
Microporous Layer Thickness Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroporousLayerThicknessMeasurement- Type
- Class, Measurement
- altLabel
- thickness gauge measurement
Measurement of MPL thickness as thickness difference between coated GDM and uncoated MPS using thickness gauge.
Microscopy Measured Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroscopyMeasuredArea- Type
- Class, Characteristic
- altLabel
- measured area; measured surface area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
A geometric characteristic specifying the area associated with microscopy measured.
Microscopy Protocol Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicroscopyProtocolSpecification- Type
- Class, Specification
A specification of a microscopy procedure and its selected specimen-preparation, acquisition, and analysis settings.
Microstructure Graphitic Order Table 1
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicrostructureGraphiticOrderTable1- Type
- Class, Compatibility
A data resource used to represent microstructure graphitic order table 1.
Microstructure Image Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MicrostructureImageDataset- Type
- Class, Data
A dataset containing raw or processed microscopy images used to document microstructure, morphology, or nanoscale features of a specimen.
Milli Ohmmeter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MilliOhmmeter- Type
- Class, Instrument
- altLabel
- Agilent milli-ohmmeter
An electrical measuring instrument designed to determine low electrical resistance, typically in the milliohm range.
Milling Media Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MillingMediaDiameter- Type
- Class, Characteristic
- altLabel
- zirconia ball diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of milling media.
Milling process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MillingProcess- Type
- Class, Manufacturing
A material-processing operation that uses mechanical action to reduce particle size, mix constituents, or modify particle morphology.
Minimum Storage Modulus Requirement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MinimumStorageModulusRequirement- Type
- Class, Characteristic
- altLabel
- Smay et al. Eq. (1) requirement
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A property denoting minimum shear storage modulus G' required to keep filament deflection below ~5% (computed from Eq. 1).
Mixed Alkali Geopolymer Lattice
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MixedAlkaliGeopolymerLattice- Type
- Class, Matter
- altLabel
- Na+K geopolymer lattice; mixed alkali geopolymer
Mixed sodium+potassium geopolymer lattice catalyst formulation (3D_Na.K_GP).
Mixing instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MixingInstrument- Type
- Class, Instrument
A manufacturing instrument that mixes, disperses, homogenizes, mills, or sonicates material constituents.
- subclasses
- Ball Mill, Bead Mill Machine, Dispersion Machine, High Pressure Homogenizer, High Shear Mixer, Kitchen Blender, Magnetic Stirrer, Planetary Centrifugal Mixer, Planetary Mixer, Rotor Stator Homogenizer, Ultrasonic Bath, Ultrasonicator
Mixing or dispersion process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MixingOrDispersionProcess- Type
- Class, Manufacturing
A formulation process that distributes constituents through mechanical, acoustic, or fluid-mediated mixing.
Mixture
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Mixture- Type
- Class, Matter
A material entity containing two or more substances that coexist without being represented as one pure chemical substance.
Mappings
- skos:exactMatch
http://champ-project.org/images/ontology/cao.owl#CAO_000156 (Mixture) - skos:exactMatch
http://emmo.info/emmo#EMMO_ec2c8ac8_98c5_4c74_b85b_ff8e8ca6655c (Mixture) - skos:narrowMatch
https://openenergyplatform.org/ontology/oeo/OEO_00010236 (gas mixture)
Mn AA Pyr Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MnAAPyrCatalyst- Type
- Class, Matter
- altLabel
- Mn-AAPyr
PGM-free M-N-C catalyst synthesized from Mn nitrate + aminoantipyrine precursor via SSM.
Mo O 3 Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MoO3Powder- Type
- Class, Matter
- altLabel
- MoO3; MoO₃
Molybdenum(VI) oxide powder feedstock used in blended oxide inks.
Mo Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MoPowder- Type
- Class, Matter
- altLabel
- Mo
Elemental molybdenum powder feedstock used in metal powder inks.
Mo S 2 Nanosheets
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MoS2Nanosheets- Type
- Class, Matter
- altLabel
- MS nanosheets; MoS2; molybdenum sulphide nanosheets
Catalyst component: graphene-like thin-layer MoS2 nanosheets synthesized hydrothermally.
Mo S 2 Ni Fe 2 O 4 Nanohybrid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MoS2NiFe2O4Nanohybrid- Type
- Class, Matter
- altLabel
- MoS2@NiFe2O4; MoS2@NiFe2O4 nanohybrids
Bifunctional hybrid catalyst: ultrathin layered MoS2 with interfacially coupled NiFe2O4 nanostructure.
Model artifact
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ModelArtifact- Type
- Class, ModelArtifact
An information entity that specifies a conceptual, mathematical, statistical, or computational representation of a system.
Model execution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ModelExecution- Type
- Class, Process
A simulation process that evaluates a defined computational model using specified inputs to produce model outputs.
- subclasses
- Carbon Black Aggregate Structure Simulation, Catalyst Layer Microstructure Simulation, Discrete Element Method Packing Simulation, Electrochemical Reaction Simulation, Equivalent Circuit Fitting, Finite Element Analysis Simulation, Ink-to-Composition Model, Ionomer Coating Simulation, Molecular Dynamics Simulation, PEMFCCFD Simulation, Profilometer Tip Simulation
Model Fit R 2
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ModelFitR2- Type
- Class, Characteristic
- altLabel
- R2; R²
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting coefficient of determination for Eq. (1) fit.
Molar Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MolarConcentration- Type
- Class, Characteristic
- altLabel
- molarity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentration
A composition characteristic specifying the amount of molar per stated quantity of mixture or solution.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/result#AFR_0002006 (molar concentration)
Molar-mass dispersity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MolarMassDispersity- Type
- Class, Characteristic
- altLabel
- molecular-weight dispersity; Đ
A dimensionless molecular-mass characteristic equal to the ratio of mass-average molar mass to number-average molar mass for a polymer sample.
Molecular Diffusivity In Air
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MolecularDiffusivityInAir- Type
- Class, Characteristic
- altLabel
- Dij; binary diffusivity in air; molecular diffusivity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DiffusionCoefficient
A property denoting Binary molecular diffusion coefficient of O2 in air used in tortuosity analysis (cm2/s).
Molecular Dynamics Simulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MolecularDynamicsSimulation- Type
- Class, Process
- altLabel
- MD simulation; atomistic molecular dynamics; molecular dynamics
A computational model execution that evolves atomic or molecular positions and velocities over time under specified interaction models and dynamical equations to predict structural, dynamical, or transport behavior.
Mappings
- skos:exactMatch
http://www.bioassayontology.org/bao#BAO_0002301 (molecular dynamics simulation)
Molecular Weight
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MolecularWeight- Type
- Class, Characteristic
- altLabel
- Mw; PBI molecular weight; PEG molecular weight
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarMass
A property denoting molecular weight and determined in Material Specification Measurement and Gel Permeation Chromatography Measurement.
Molecular-mass characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MolecularMassCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing molecular mass or a distribution of molecular masses in a substance or material.
Molecularly Imprinted Polymer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MolecularlyImprintedPolymer- Type
- Class, Matter
- altLabel
- MIP
A polymer formed in the presence of a template species whose removal creates recognition sites with chemical and structural complementarity to that template.
Monomer Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MonomerConcentration- Type
- Class, Characteristic
- altLabel
- DMAEMA; DMAEMA concentration; styrene concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarConcentration
A composition characteristic specifying the amount of monomer per stated quantity of mixture or solution.
Monomer Conversion
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MonomerConversion- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Fraction | http://qudt.org/vocab/unit/PERCENT
A property denoting fractional conversion of monomers during polymerization estimated from UV–vis.
Morphological characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MorphologicalCharacteristic- Type
- Class, Characteristic
A structural property describing form, size distribution, topology, porosity, or spatial morphology.
- subclasses
- AFM Tip Nominal Radius, Agglomerate Diameter, Agglomerate Shape, Average Pore Diameter, Average Pore Size, Bending Radius, Biomimetic Vein Structure, Carbon Agglomerate Core Radius, Carbon Aggregate Ionomer Particle Radius Of Gyration, Carbon Aggregate Radius Of Gyration, Carbon Black Particle Size, Carbon Fiber Diameter, Carbon Nanotube Outer Diameter, Carbon Primary Particle Diameter, Catalyst Layer Morphology, Catalyst Layer Porosity, Catalyst Layer Tortuosity, Catalyst Particle Diameter, CCL accessible primary-pore volume fraction, CCL accessible secondary-pore volume fraction, CCL primary-pore geometric-mean radius, CCL primary-pore volume fraction, CCL secondary-pore geometric-mean radius, CCL secondary-pore hydrophobic volume fraction, CCL secondary-pore volume fraction, Coffee Ring Effect, Core Diameter, Deflection Percent Of Filament Diameter, Designed Porosity, DLS polydispersity index, Electrospinning Needle Inner Diameter, Equivalent ionomer patch radius, Ferritin Cavity Diameter, Gas Diffusion Layer Porosity, Graphitic Crystallite Size La, Graphitic Crystallite Stacking Size Lc, Graphitic Planes Per Crystallite, Hydrodynamic Diameter, Hydrodynamic Radius, Inter Agglomerate Pore Size, Inter Crystallite Distance, Ionomer Aggregate Diameter, Ionomer Mass Fractal Radius Of Gyration, Ionomer Nanoparticle Radius, Ionomer Porosity, Lattice Diameter, Macropore Diameter, Mean Particle Size, Mesopore Diameter, Microfilament Diameter, Microporous Layer Porosity, Milling Media Diameter, Nafion Fiber Diameter, Nanoscale Pore Size Max, Nanoscale Pore Size Min, Needle Diameter, Nozzle Diameter, Open Porosity, Particle Size D 10, Particle Size D 50, Particle Size D 90, Particle Size Span, Particles Per Agglomerate, Pd Nanoparticle Diameter, Plate Diameter, Platinum particle radius, Pore Area Fraction, Pore Major Axis, Pore Minor Axis, Pore Radius, Pore Size Distribution, Pore Size Distribution Peak Diameter, Pore Volume Fraction, Primary Agglomerate Pore Size, Printer Filament Diameter Setting, Profilometer Tip Radius, Pt Crystal Diameter, Pt Crystallite Size, Pt Particle Diameter Increase Percent, Pt Particle Size, Radius Of Gyration, Reactor Tube Diameter, Screen Wire Diameter, Surface Roughness Ra, Surface Roughness Rq, Surface Roughness Sa, Tortuosity Factor, Total pore volume, Total Porosity
MSA Capped Quantum Dot
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MSACappedQuantumDot- Type
- Class, Matter
- altLabel
- MSA capped QD
Quantum dots after ligand exchange to 3-mercaptosuccinic acid (carboxyl-terminated surface).
MSA Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MSAMass- Type
- Class, Compatibility
- altLabel
- MSA (mg)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic that represents msa mass for a material, component, process, measurement, or hydrogen-electrochemical system.
MSA Weight Percent Of QD Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MSAWeightPercentOfQDPowder- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic that represents msa weight percent of qd powder for a material, component, process, measurement, or hydrogen-electrochemical system.
Mu Phase
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MuPhase- Type
- Class, Matter
- altLabel
- μ-phase
Intermetallic μ-phase ((Fe,Ni)7Mo6) formed during Mo dissolution/homogenization.
Muffle Furnace
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MuffleFurnace- Type
- Class, Instrument
- altLabel
- muffle furnace (Nabertherm GmbH)
An instrument corresponding to a muffle furnace and used in Sintering Process and Thermal Crosslinking.
Multiple Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MultipleCatalystLayer- Type
- Class, Matter
- altLabel
- MCL
multiple catalyst layer architecture with three sublayers (X proton-conduct, Y reaction, Z air-diffusion) used to shift reaction area through-plane
Multiwalled Carbon Nanotube
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MultiwalledCarbonNanotube- Type
- Class, Matter
A material entity corresponding to a multiwalled carbon nanotube and produced in Water Assisted Low Pressure CVD.
Mythen II Array Detector
- IRI
https://w3id.org/h2kg/hydrogen-ontology#MythenIIArrayDetector- Type
- Class, Instrument
- altLabel
- Mythen II
Mythen II X-ray detector array used for synchrotron powder diffraction.
N 1 s Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#N1sAtomicPercent- Type
- Class, Characteristic
- altLabel
- N atomic percent; N-contents; nitrogen atomic percent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AtomPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting atomic percent of nitrogen (from N 1s signal) measured by XPS.
N 719 Dye
- IRI
https://w3id.org/h2kg/hydrogen-ontology#N719Dye- Type
- Class, Matter
Ruthenium dye used to sensitize TiO2 photoanode.
n Butyl Acetate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#nButylAcetate- Type
- Class, Matter
- altLabel
- NBA; butyl acetate; normal butyl acetate
Organic solvent (n-butyl acetate) used in catalyst ink; lower polarity than IPA.
N Methyl 2 Pyrrolidone
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NMethyl2Pyrrolidone- Type
- Class, Matter
- altLabel
- N-methylpyrrolidone
Solvent used for screen printing and bar coating slurries; not found in ontology
N Propanol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NPropanol- Type
- Class, Matter
- altLabel
- OmniSolv n-propanol; n-PA; propyl alcohol
Proposed Matter term for 1-propanol used as ink solvent.
N Propanol Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NPropanolMassFractionInInk- Type
- Class, Characteristic
- altLabel
- WF_NPA; n-propanol (wt%); n-propanol fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as N Propanol Mass Fraction In Ink.
Na 2 O Al 2 O 3 Molar Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Na2OAl2O3MolarRatio- Type
- Class, Characteristic
- altLabel
- Na20/Al203; Na2O/Al2O3
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarRatio
A dimensionless characteristic expressing the stated ratio identified as Na 2 O Al 2 O 3 Molar Ratio.
Nafion 211 Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Nafion211Membrane- Type
- Class, Matter
- altLabel
- NR211 membrane; Nafion 211; Nafion 211 membranes
Specific PFSA membrane grade used as substrate (treated as ProtonExchangeMembrane subtype).
Nafion 212 Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Nafion212Membrane- Type
- Class, Matter
- altLabel
- Nafion NR-212; Nafion NR-212 membrane; Nafion-212
Nafion NR212, a commercial perfluorosulfonic-acid proton-exchange membrane grade.
Nafion Backbone Solubility Parameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NafionBackboneSolubilityParameter- Type
- Class, Characteristic
- altLabel
- solubility parameter of Nafion backbone; δ1; δ_backbone
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SolubilityParameter
http://qudt.org/vocab/quantitykind/SolubilityParameter
A cohesive-energy-density characteristic representing the solvent-affinity contribution associated with the fluorocarbon backbone of Nafion.
Nafion Fiber Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NafionFiberDiameter- Type
- Class, Characteristic
- altLabel
- fiber diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting Average diameter of electrospun Nafion fibers forming the scaffold mat (SEM-derived).
Nafion Fiber Loading
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NafionFiberLoading- Type
- Class, Characteristic
- altLabel
- Nafion fiber loading level; fiber loading level
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassArealDensity
Mass of dry Nafion fibers deposited on a membrane divided by the geometric area of the coated membrane region.
Nafion Fiber Mat
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NafionFiberMat- Type
- Class, Matter
- altLabel
- Nafion fiber network; Nafion fiber-coated membrane
A material entity corresponding to a nafion fiber mat and produced in Electrospinning Deposition.
Nafion Main Chain Mobility
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NafionMainChainMobility- Type
- Class, Compatibility
- altLabel
- main-chain mobility; main-chain mobility (19F NMR)
A property denoting mobility metric for Nafion main chain inferred from 19F NMR peak analysis; numeric values not explicitly stated in text for this paper.
Nafion Side Chain Mobility
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NafionSideChainMobility- Type
- Class, Compatibility
- altLabel
- kHz^{-1}; side-chain mobility; side-chain mobility (19F NMR)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/InverseFrequency
A property denoting nafion side chain mobility and determined in F 19 NMR Mobility Measurement.
Nafion Side Chain Solubility Parameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NafionSideChainSolubilityParameter- Type
- Class, Characteristic
- altLabel
- solubility parameter of Nafion side chain; δ2; δ2 (side chain)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SolubilityParameter
http://qudt.org/vocab/quantitykind/SolubilityParameter
A cohesive-energy-density characteristic representing the solvent-affinity contribution associated with the ionic side chains of Nafion.
Nafion Solution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NafionSolution- Type
- Class, Matter
- altLabel
- Nafion; Nafion resin; protective Nafion film
PFSA ionomer solution drop-cast as a protective film on catalyst-coated glassy carbon.
Nafion Solution Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NafionSolutionMassFractionInInk- Type
- Class, Characteristic
- altLabel
- Nafion resin solution wt.%; Nafion solution (wt.%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Nafion Solution Mass Fraction In Ink.
Nafion To Pt Mass Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NafionToPtMassRatio- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A dimensionless characteristic expressing the stated ratio identified as Nafion To Pt Mass Ratio.
Nanoparticle Mass Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NanoparticleMassConcentration- Type
- Class, Characteristic
- altLabel
- g/L
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassConcentration
A composition characteristic specifying the amount of nanoparticle mass per stated quantity of mixture or solution.
Nanoscale Pore Size Max
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NanoscalePoreSizeMax- Type
- Class, Characteristic
- altLabel
- nano-XCT pore size; nm-scale pores max; pore size max
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting upper bound of reported nm-scale pore size tunability range.
Nanoscale Pore Size Min
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NanoscalePoreSizeMin- Type
- Class, Characteristic
- altLabel
- FIB–SEM pore size range; nm-scale pores min; pore size min
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting lower bound of reported nm-scale pore size tunability range.
Nb B 2 Support
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NbB2Support- Type
- Class, Matter
Non-carbon catalyst support material: NbB2 microparticles used for Pt deposition.
NC Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NCAtomicPercent- Type
- Class, Compatibility
- altLabel
- N/C; N/C (at.%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AtomicPercent
A property denoting atomic percent (at.%) ratio of nitrogen to carbon measured by EDX in CNT forests.
NCNT Fs Support
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NCNTFsSupport- Type
- Class, Matter
- altLabel
- NCNTFs
Nitrogen-doped carbon nanotube frameworks derived from pyrolyzed ZIF-67; used as catalyst support (with or without Pt).
Needle Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NeedleDiameter- Type
- Class, Characteristic
- altLabel
- blunt needle diameter; external diameter; nozzle diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of needle.
Neutron Flux
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NeutronFlux- Type
- Class, Characteristic
- altLabel
- incident neutron flux
- QUDT guidance
A transport characteristic specifying neutron flux under the conditions and reference basis stated with the record.
Neutron Scattering Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NeutronScatteringInstrument- Type
- Class, Instrument
- altLabel
- SANS instrument; neutron scattering
An instrument corresponding to a neutron scattering instrument and used in Contrast Variation SANSUSANS Measurement.
Neutron tomography
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NeutronTomographyMeasurement- Type
- Class, Measurement
- altLabel
- HR Neutron CT; Neutron Tomography Measurement; operando neutron tomography
A measurement process that uses neutron tomography to characterize membrane-electrode assemblies and operando fuel-cell water dynamics while generating tomographic projection and reconstruction datasets and determining tortuosity and water-droplet descriptors.
Neutron Tomography Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NeutronTomographyInstrument- Type
- Class, Instrument
- altLabel
- neutron tomography setup
An instrument configuration for neutron tomography that combines neutron imaging, projection acquisition, and tomographic reconstruction workflows for operando fuel-cell characterization.
Ni 3 Ni 2 Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Ni3Ni2Ratio- Type
- Class, Characteristic
- altLabel
- Ni3+/Ni2+
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Ratio
A property denoting xPS-derived surface oxidation-state ratio for Ni.
Ni AA Pyr Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiAAPyrCatalyst- Type
- Class, Matter
- altLabel
- Ni-AAPyr
PGM-free M-N-C catalyst synthesized from Ni nitrate + aminoantipyrine precursor via SSM.
Ni Content Wt
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiContentWt- Type
- Class, Characteristic
- altLabel
- Ni content; wt.% Ni
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting nickel content in catalyst (wt.%), measured by ICP.
Ni Fe 2 O 4 Nanostructure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiFe2O4Nanostructure- Type
- Class, Matter
- altLabel
- NiFe2O4
Catalyst component: NiFe2O4 (nickel ferrite) nanostructure attached to MoS2 in hybrid.
Ni Fraction In Ni Plus Mg
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiFractionInNiPlusMg- Type
- Class, Characteristic
- altLabel
- Ni/(Ni+Mg)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarFraction
A property denoting molar fraction of Ni among divalent metals (nominal and experimental).
Ni Mg Al Layered Double Hydroxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiMgAlLayeredDoubleHydroxide- Type
- Class, Matter
- altLabel
- Ni(Mg)Al-LDH; hydrotalcite phase; layered double hydroxide
Ternary layered double hydroxide precursor containing Ni2+, Mg2+, Al3+ (coprecipitated); used to form mixed-oxide catalysts after calcination.
Ni Mg Al Mixed Oxide Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiMgAlMixedOxideCatalyst- Type
- Class, Matter
- altLabel
- Ni(Mg)AlOx; NiMgAl mixed oxide
Mixed oxide catalyst obtained by calcination of Ni(Mg)Al-LDH at 600°C; reduced prior to furfural hydrogenation.
Ni O Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiOPowder- Type
- Class, Matter
- altLabel
- NiO
Nickel(II) oxide powder feedstock used in blended oxide inks.
Ni PB Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiPBCatalyst- Type
- Class, Matter
- altLabel
- NiPB; biomimetic catalyst loaded with nickel (Ni) and phosphorus (P)
Ni/P loaded biomimetic catalyst on porous alumina carrier (nominal Ni:P = 2).
Ni Plus Mg To Al Molar Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiPlusMgToAlMolarRatio- Type
- Class, Characteristic
- altLabel
- (Ni+Mg)/Al
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarRatio
A property denoting molar ratio of total divalent metals to Al in LDH composition (nominal and experimental).
Ni Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiPowder- Type
- Class, Matter
- altLabel
- Ni
Elemental nickel powder feedstock used in metal powder inks.
Ni To P Atomic Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiToPAtomicRatio- Type
- Class, Characteristic
- altLabel
- Ni:P atomic ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A dimensionless characteristic expressing the stated ratio identified as Ni To P Atomic Ratio.
Ni To SXRF Peak Area Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NiToSXRFPeakAreaRatio- Type
- Class, Characteristic
- altLabel
- Ni/S XRF peak area ratio; Ni/S XRF ratio; Ni:S XRF peak area ratio (aqueous ink)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting ni to SXRF peak area ratio and determined in Micro X Ray Fluorescence Measurement.
Nickel Butanethiolate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NickelButanethiolate- Type
- Class, Matter
- altLabel
- Ni butane thiolate
Nickel thiolate precursor (molecular ink)
Nickel Cobaltite Spinel Ni Co 2 O 4
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NickelCobaltiteSpinelNiCo2O4- Type
- Class, Matter
- altLabel
- NiCo2O4; nickel cobaltite
Bimetallic spinel oxide nanoplate electrocatalyst (best-performing sample)
Nickel Foam
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NickelFoam- Type
- Class, Matter
- altLabel
- Ni-foam
Nickel foam used as cathode current collector/support.
Nickel Nitrate Hexahydrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NickelNitrateHexahydrate- Type
- Class, Matter
- altLabel
- nickel nitrate
Nickel precursor salt used in wet co-impregnation.
Nickel On Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NickelOnCarbonCatalyst- Type
- Class, Matter
- altLabel
- Ni/C; nickel catalyst on carbon support
Carbon-supported Ni catalyst used as anode catalyst for hydrazine oxidation.
Nickel Oxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NickelOxide- Type
- Class, Matter
A material entity corresponding to a nickel oxide.
Nickel Plate Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NickelPlateSubstrate- Type
- Class, Matter
- altLabel
- Ni substrate
A material entity corresponding to a nickel plate substrate.
Nickel Thiolate Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NickelThiolateMass- Type
- Class, Characteristic
- altLabel
- Ni-BT mass
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of nickel thiolate.
Nitrocellulose Varnish
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NitrocelluloseVarnish- Type
- Class, Matter
A liquid coating formulation containing nitrocellulose dissolved in an organic-solvent vehicle, optionally with plasticizers and other additives.
Nitrocellulose Varnish Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NitrocelluloseVarnishMass- Type
- Class, Characteristic
- altLabel
- Nitrocellulose varnish; varnish mass
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of nitrocellulose varnish.
Nitrogen
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Nitrogen- Type
- Class, Matter
- altLabel
- liquid nitrogen; nitrogen atmosphere; pure nitrogen
A material entity corresponding to a nitrogen and used as an input in MEAPolarization, Cyclic Voltammetry, and Nitrogen Physisorption Measurement.
Mappings
- skos:narrowMatch
http://purl.allotrope.org/ontologies/material#AFM_0001131 (liquid nitrogen)
Nitrogen Adsorption Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NitrogenAdsorptionAnalyzer- Type
- Class, Instrument
- altLabel
- N2 adsorption analyzer; SURFER volumetric sorption analyzer (Thermo Fisher Scientific)
Instrument for N2 adsorption/desorption (surface area and pore analysis).
Nitrogen Doped Graphene
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NitrogenDopedGraphene- Type
- Class, Matter
A material entity corresponding to a nitrogen doped graphene and used as an input in Catalyst Ink Preparation.
Nitrogen Physisorption Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NitrogenPhysisorptionMeasurement- Type
- Class, Measurement
- altLabel
- BET measurement; BET surface area measurement; nitrogen physisorption
An adsorption measurement in which nitrogen is used as the probe adsorptive to characterize specific surface area or pore structure.
Nitrogen Source Volumetric Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NitrogenSourceVolumetricFlowRate- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumetricFlowRate
A transport characteristic specifying the quantity of nitrogen source volumetric passing a reference boundary per unit time.
Nitrogen Volumetric Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NitrogenVolumetricFlowRate- Type
- Class, Characteristic
- altLabel
- flow rate; nitrogen flow; nitrogen flow rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumetricFlowRate
A transport characteristic specifying the quantity of nitrogen volumetric passing a reference boundary per unit time.
NMR Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NMRMeasurement- Type
- Class, Measurement
A measurement process that uses NMR measurement to determine Degree Of Sulfonation.
Non Imprinted Polymer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NonImprintedPolymer- Type
- Class, Matter
- altLabel
- NIP
Control polymer (no imprinting cavities) grafted onto catalyst.
Non Pt Catalyst Volumetric Activity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NonPtCatalystVolumetricActivity- Type
- Class, Compatibility
- altLabel
- Non-Pt cataystactivity per volumod titneded; non-Pt catalyst activity per volume
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentPerVolume
A property denoting non pt catalyst volumetric activity and determined in Review Statement Extraction.
Nonlinear Autoregressive Neural Network Model
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NonlinearAutoregressiveNeuralNetworkModel- Type
- Class, ModelArtifact
- altLabel
- non-linear autoregressive neural network
A neural-network time-series model that predicts an output from delayed values of that output through a learned nonlinear mapping.
Nordson EFD 781 Nozzle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NordsonEFD781Nozzle- Type
- Class, Matter
A spray-nozzle component of a Nordson EFD 781-series spray-valve assembly that directs fluid and atomizing gas to deposit a coating.
Normalization basis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NormalizationBasis- Type
- Class, NormalizationBasis
A specification identifying the quantity or reference basis used to normalize another value.
Normalized Energy Recovery
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NormalizedEnergyRecovery- Type
- Class, Characteristic
- altLabel
- MFC-CICo; MFC-CIFe; NER
- QUDT guidance
- http://qudt.org/vocab/quantitykind/EnergyPerVolume
A property denoting energy recovered per treated wastewater volume (kWh per m^3).
Normalized Polymer Force Factor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NormalizedPolymerForceFactor- Type
- Class, Compatibility
- altLabel
- normalized polymer force
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A quantitative characteristic that represents normalized polymer force factor for a material, component, process, measurement, or hydrogen-electrochemical system.
Normalized Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NormalizedResistance- Type
- Class, Characteristic
- altLabel
- R/R0
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A property denoting resistance of Cu interconnect normalized to initial resistance before bending test.
Notched Izod Impact Toughness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NotchedIzodImpactToughness- Type
- Class, Characteristic
- altLabel
- notched Izod impact
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ImpactToughness
A property denoting notched Izod impact toughness of ToughPoint resin (J/m).
Nozzle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Nozzle- Type
- Class, Matter
- altLabel
- dispensing nozzle; nozzle tip; tapered nozzle
A fluid-delivery component with an outlet passage that directs and controls discharge of a liquid, dispersion, or gas.
Nozzle Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NozzleDiameter- Type
- Class, Characteristic
- altLabel
- dispense tip internal diameter; internal diameter; nozzle inner diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/MilliM
A geometric characteristic specifying the diameter of nozzle.
Nozzle To Substrate Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NozzleToSubstrateDistance- Type
- Class, Characteristic
- altLabel
- spray distance; standoff distance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying nozzle to substrate distance under the conditions and reference basis stated with the record.
NSPCN Fs Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NSPCNFsCatalyst- Type
- Class, Matter
- altLabel
- S-P-CNFs; metal-free catalyst (N
Nitrogen and sulfur co-doped porous carbon nanofibers used as metal-free catalyst.
Number Average Molecular Weight
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NumberAverageMolecularWeight- Type
- Class, Characteristic
- altLabel
- Mn
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarMass
A property denoting number-average molecular weight (Mn) of polymer.
Number Of Cells
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NumberOfCells- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying number of cells under the conditions and reference basis stated with the record.
Number Of Cycles
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NumberOfCycles- Type
- Class, Characteristic
- altLabel
- CV cycles; durability cycles; potential cycles
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying number of cycles under the conditions and reference basis stated with the record.
Number Of Spray Passes
- IRI
https://w3id.org/h2kg/hydrogen-ontology#NumberOfSprayPasses- Type
- Class, Characteristic
- altLabel
- number of passes; number of spraying cycles; spray passes
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying number of spray passes under the conditions and reference basis stated with the record.
O 1 s Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#O1sAtomicPercent- Type
- Class, Characteristic
- altLabel
- O atomic percent; oxygen atomic percent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AtomPercent
A property denoting atomic percent of oxygen (from O 1s signal) measured by XPS.
O2–N2 Switching Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#O2N2SwitchingMeasurement- Type
- Class, Measurement
- altLabel
- O2–N2 switching
A measurement process that switches between oxygen and nitrogen gas-side conditions under defined operating settings to quantify oxygen-transport-related response in the fuel-cell system.
Octane Adsorption BET Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OctaneAdsorptionBETMeasurement- Type
- Class, Measurement
- altLabel
- BET; octane adsorption
A measurement process that uses octane adsorption BET measurement to determine BET Surface Area Octane Adsorption using Gas Sorption Analyzer.
OER Performance Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OERPerformanceDataset- Type
- Class, Data
- altLabel
- OER activity dataset; OER performance
Dataset containing OER performance metrics (current density vs potential, overpotential, Tafel slope).
Ohmic Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OhmicResistance- Type
- Class, Characteristic
- altLabel
- HFR; R_HFR; high frequency resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Resistance | http://qudt.org/vocab/unit/OHM
http://qudt.org/vocab/quantitykind/OhmicResistance
A property denoting ohmic resistance and determined in Current-Interrupt HFR Measurement, MEAPolarization, and Electrochemical Impedance Spectroscopy Potentiostatic.
Ohmic Resistance Increase Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OhmicResistanceIncreasePercent- Type
- Class, Characteristic
- altLabel
- HFR increased cell resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio | http://qudt.org/vocab/unit/PERCENT
A property denoting ohmic resistance increase percent.
Ohmic Resistance Reduction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OhmicResistanceReductionPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting percent reduction of ohmic/HFR during activation compared to initial state.
Oleic Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OleicAcid- Type
- Class, Matter
- altLabel
- OA
Long-chain ligand on as-synthesized CQDs; replaced during ligand exchange.
Oleic Acid Capped Quantum Dot
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OleicAcidCappedQuantumDot- Type
- Class, Matter
- altLabel
- oleic acid (OA) capped CQD; oleic acid-capped QDs
Native-ligand (oleic acid) capped QDs before ligand exchange.
Oleic Acid Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OleicAcidMassFraction- Type
- Class, Characteristic
- altLabel
- Oleic fatty acid%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting oleic acid mass fraction and determined in Gas Chromatography Measurement.
Olympus LEXTOLS 5000
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OlympusLEXTOLS5000- Type
- Class, Instrument
3D laser scanning confocal microscope used for surface roughness scans.
Onset Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OnsetPotential- Type
- Class, Characteristic
- altLabel
- E_onset; Eon; potential onset
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
A property denoting onset potential and determined in Rotating Ring Disk Voltammetry, Cyclic Voltammetry, and Linear Sweep Voltammetry.
Open Circuit Voltage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpenCircuitVoltage- Type
- Class, Characteristic
- altLabel
- E; OCP; OCV
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
A property denoting open circuit voltage and determined in MEAPolarization, Linear Sweep Voltammetry, and Microbial Fuel Cell Polarization Measurement.
Mappings
- skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0007210 (open circuit voltage)
Open Porosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpenPorosity- Type
- Class, Characteristic
- altLabel
- open porosity values
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting open (connected) porosity of printed lattice body.
Operating characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OperatingCharacteristic- Type
- Class, Characteristic
A quantitative characteristic that specifies or describes the operating state of a process, device, or experimental system.
Operating Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OperatingTemperature- Type
- Class, Characteristic
- altLabel
- K; cell temperature; cell-operating temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermodynamicTemperature | http://qudt.org/vocab/unit/K
http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with operating.
Operating Voltage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OperatingVoltage- Type
- Class, Characteristic
- altLabel
- OV; measurement voltage; operating at 4.0 voltages (V)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
An electrical characteristic specifying the electric potential difference associated with operating.
Optical characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpticalCharacteristic- Type
- Class, Characteristic
A property describing interaction with light or another optical response of a material, component, or system.
Optical Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpticalDensity- Type
- Class, Characteristic
- altLabel
- O.D.
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting optical density setting used during PL/QY measurements (dimensionless).
Optical measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpticalMeasurement- Type
- Class, Measurement
A characterization measurement that determines an optical response or uses visible, ultraviolet, or infrared radiation to inspect a specimen.
Optical Microscope
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpticalMicroscope- Type
- Class, Instrument
- altLabel
- digital optical microscope; optical imaging device
Optical microscope used to observe macroscopic printed structures.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/equipment#AFE_0000129 (optical microscope) - skos:exactMatch
http://purl.obolibrary.org/obo/OBI_0000940 (optical microscope) - skos:exactMatch
https://w3id.org/polymat/OpticalMicroscope (Optical microscope)
Optical microscopy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpticalMicroscopyImagingMeasurement- Type
- Class, Measurement
- altLabel
- Optical Microscopy Imaging Measurement; optical micrographs; optical microscopy; optical microscopy images
Optical microscopy imaging used to observe macroscopic structure of printed grids.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/process#AFP_0001404 (optical microscopy) - skos:exactMatch
http://www.bioassayontology.org/bao#BAO_0000451 (optical microscopy) - skos:exactMatch
https://w3id.org/emmo/domain/characterisation-methodology/chameo#OpticalMicroscopy (OpticalMicroscopy)
Optical Surface Profile Thickness Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpticalSurfaceProfileThicknessMeasurement- Type
- Class, Measurement
- altLabel
- surface profile microscope
Thickness measurement using super depth surface profile measurement microscope (optical profilometry-like).
Optical Surface Profiler
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpticalSurfaceProfiler- Type
- Class, Instrument
- altLabel
- KEYENCE VK-8550 Super Depth Surface Profile Measurement Microscope
An instrument corresponding to an optical surface profiler and used in Optical Surface Profile Thickness Measurement.
Optical Transmittance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpticalTransmittance- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/OpticalTransmittance | http://qudt.org/vocab/unit/PERCENT
A property denoting optical transmittance of CCM (percent) used as proxy for catalyst-layer surface coverage.
Optical Transmittance Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OpticalTransmittanceMeasurement- Type
- Class, Measurement
- altLabel
- optical transmittance analysis
Measurement of CCM optical transmittance (400–700 nm) to quantify catalyst-layer surface coverage.
Orange Peel Activated Carbon
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OrangePeelActivatedCarbon- Type
- Class, Matter
- altLabel
- OP-AC; orange peel derived activated carbon
Activated carbon synthesized from orange peels via H3PO4 chemical activation and pyrolysis; used as electrode material and catalyst support.
Organic Flow Battery Polarization Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OrganicFlowBatteryPolarizationMeasurement- Type
- Class, Measurement
- altLabel
- polarization measurement
A measurement process that uses organic flow battery polarization measurement to determine Power Density, Peak Power Density, and Open Circuit Voltage using Battery Analyzer and Diaphragm Pump and generating Polarization Curve Dataset.
Organic Solvent To Water Volume Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OrganicSolventToWaterVolumeRatio- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeRatio
A dimensionless characteristic expressing the stated ratio identified as Organic Solvent To Water Volume Ratio.
Organization
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Organization- Type
- Class, Agent
A collective agent with an organized identity that can bear responsibility for activities or resources, such as a research institution, company, consortium, facility organization, or project team.
- subclassOf / subPropertyOf
- Agent
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/OBI_0000245 (organization) - skos:exactMatch
http://semanticscience.org/resource/SIO_000012 (organization) - skos:exactMatch
http://www.w3.org/ns/prov#Organization (Organization)
ORR Performance Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ORRPerformanceDataset- Type
- Class, Data
Electrochemical ORR activity and stability data for SG-Fe compared with Pt/C in 0.1 M KOH.
Other Fatty Acids Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OtherFattyAcidsMassFraction- Type
- Class, Compatibility
- altLabel
- other fatty acid%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting other fatty acids mass fraction and determined in Gas Chromatography Measurement.
Oven
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Oven- Type
- Class, Instrument
- altLabel
- convection oven; forced convection oven; vacuum oven
An instrument corresponding to an oven and used in Catalyst Impregnation, Convection Drying, and Vacuum Drying.
Overpotential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Overpotential- Type
- Class, Characteristic
- altLabel
- ΔV; ΔV_peak2; ΔV_peak3
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
A property denoting overpotential and determined in MEAPolarization, Linear Sweep Voltammetry, and Electrochemical Reaction Simulation.
Oxidative Stability Residual Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxidativeStabilityResidualWeightPercent- Type
- Class, Characteristic
- altLabel
- oxidative stability; residual weight
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting residual weight (%) after Fenton reagent exposure (80°C, 1 h).
Oxide material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxideMaterial- Type
- Class, Matter
A material entity containing an oxide as a principal functional constituent or phase.
Oxide Powder Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxidePowderInk- Type
- Class, Matter
- altLabel
- blended oxide ink; oxide-based ink
PowderInk formulated with oxide powders (Fe2O3, NiO, MoO3) that are reduced in H2 during heat treatment.
Oxirane Content
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxiraneContent- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting oxirane content and determined in Epoxy Equivalent Titration Measurement.
Oxygen
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Oxygen- Type
- Class, Matter
- altLabel
- oxygen gas; oxygen-saturated electrolyte; pure oxygen
A material entity corresponding to an oxygen and used as an input in MEAPolarization, Rotating Ring Disk Voltammetry, and Electrochemical Reaction Simulation.
Mappings
- skos:narrowMatch
http://purl.allotrope.org/ontologies/material#AFM_0001113 (oxygen gas)
Oxygen Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenAtomicPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstanceFraction
A property denoting oxygen atomic percent and determined in X Ray Photoelectron Spectroscopy Measurement.
Oxygen Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenConcentration- Type
- Class, Characteristic
- altLabel
- C_O2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarConcentration
A property denoting oxygen concentration and determined in PEMFCCFD Simulation.
Oxygen Concentration Time Series Data
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenConcentrationTimeSeriesData- Type
- Class, Data
- altLabel
- oxygen concentration vs time
A data resource used to represent oxygen concentration time series data generated by In Plane Effective Diffusivity Measurement.
Oxygen Diffusion Coefficient In Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenDiffusionCoefficientInIonomer- Type
- Class, Characteristic
- altLabel
- Dionomer; diffusion coeff cient of O2 in ionomer; oxygen diffusivity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DiffusionCoefficient
A transport characteristic specifying oxygen diffusion coefficient in ionomer under the conditions and reference basis stated with the record.
Oxygen Gain/Loss Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenGainLossMeasurement- Type
- Class, Measurement
- altLabel
- oxygen gain/loss
A measurement process that compares oxygen-side operating states under defined gas-side, thermal, humidity, and pressure conditions to quantify oxygen-transport-related performance differences.
Oxygen Mean Free Path Length
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenMeanFreePathLength- Type
- Class, Characteristic
- altLabel
- mean free path length
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting mean free path length of O2 under PEFC operating conditions (used to justify Knudsen diffusion).
Oxygen Partial Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenPartialPressure- Type
- Class, Characteristic
- altLabel
- O2 partial pressure; pO2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A pressure characteristic specifying the pressure associated with oxygen partial.
Oxygen Permeability
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenPermeability- Type
- Class, Characteristic
- altLabel
- O2 permeability; O₂ permeability; P_O2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/GasPermeability
A property denoting gas permeability of polymer film to O2 (Barrer).
Oxygen Permeability Factor Vs Nafion
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenPermeabilityFactorVsNafion- Type
- Class, Characteristic
- altLabel
- O2 permeability factor; oxygen permeability four times higher
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A property denoting oxygen permeability factor vs nafion.
Oxygen Plasma Treatment
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenPlasmaTreatment- Type
- Class, Manufacturing
- altLabel
- oxygen plasma
Surface treatment of substrates (e.g., thermanox) with oxygen plasma to improve ink adhesion/wetting prior to coating/printing.
Oxygen Solubility Factor Vs Nafion
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenSolubilityFactorVsNafion- Type
- Class, Characteristic
- altLabel
- O2 solubility factor; oxygen solubility 2–3 times higher; oxygen solubility in ionomer
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A property denoting oxygen solubility factor vs nafion and determined in Molecular Dynamics Simulation.
Oxygen Solubility In Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenSolubilityInIonomer- Type
- Class, Compatibility
- altLabel
- oxygen solubility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentration
A quantitative characteristic that represents oxygen solubility in ionomer for a material, component, process, measurement, or hydrogen-electrochemical system.
Oxygen Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenVolumeFraction- Type
- Class, Characteristic
- altLabel
- O2 mole fraction; oxygen mass fraction in gas channel; oxygen mole fraction
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction | http://qudt.org/vocab/unit/PERCENT
A composition characteristic expressing the volume occupied by oxygen divided by the stated total reference volume.
Oxygen Volume Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#OxygenVolumePercent- Type
- Class, Characteristic
- altLabel
- x_O2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction | http://qudt.org/vocab/unit/PERCENT
A composition characteristic expressing the volume percentage assigned to oxygen on the stated reference basis.
p H
- IRI
https://w3id.org/h2kg/hydrogen-ontology#pH- Type
- Class, Characteristic
- altLabel
- medium pH; pH 5.5; pH of suspension
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A quantitative characteristic specifying p h under the conditions and reference basis stated with the record.
PAAPVA Hydrogel
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PAAPVAHydrogel- Type
- Class, Matter
Thermally cross-linked PAA/PVA polymer network used as hydrogel electrolyte scaffold.
PAG 169 Weight Percent In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PAG169WeightPercentInInk- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as PAG 169 Weight Percent In Ink.
Palladium Chloride
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PalladiumChloride- Type
- Class, Matter
- altLabel
- palladium(II) chloride
Palladium precursor salt used to generate Pd nanoparticles in the catalyst ink.
Palladium Chloride Concentration Ppm
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PalladiumChlorideConcentrationPpm- Type
- Class, Compatibility
- altLabel
- ppm Pd; ppm PdCl2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic that represents palladium chloride concentration ppm for a material, component, process, measurement, or hydrogen-electrochemical system.
Palladium Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PalladiumMassFractionInInk- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Palladium Mass Fraction In Ink.
Palladium Nanoparticles
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PalladiumNanoparticles- Type
- Class, Matter
- altLabel
- Pd nanoparticles
Palladium nanoparticles self-reduced and stabilized by St-co-DMAEMA oligomer; act as catalytic activation sites for electroless copper.
Palmitic Acid Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PalmiticAcidMassFraction- Type
- Class, Characteristic
- altLabel
- Palmitic fatty acid%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting palmitic acid mass fraction and determined in Gas Chromatography Measurement.
Parameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Parameter- Type
- Class, ParameterRecord
A parameter record retained as the stable H₂KG anchor for a selected input, setting, or condition of a process, measurement, analysis, or model execution.
Parameter record
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParameterRecord- Type
- Class, ParameterRecord
A specification record that identifies a characteristic and, when reported, its selected value for a process, measurement, analysis, or model execution.
Particle Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleDensity- Type
- Class, Characteristic
- altLabel
- IrO2 particle density; true density; ρ_p
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Density
A density characteristic specifying the stated amount of particle per unit reference volume or area.
Mappings
- skos:narrowMatch
http://purl.allotrope.org/ontologies/quality#AFQ_0000328 (cumulative particle density (quality))
Particle Length
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleLength- Type
- Class, Characteristic
- altLabel
- rod length
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting particle length and determined in Electron Microscopy Imaging and Ultra Small Angle X Ray Scattering Measurement.
Particle Size D 10
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleSizeD10- Type
- Class, Characteristic
- altLabel
- D10
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
Particle diameter at the 10th percentile of a specified cumulative particle-size distribution, such that 10% of the declared distribution weighting lies at or below that diameter.
Particle Size D 50
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleSizeD50- Type
- Class, Characteristic
- altLabel
- D50; D_V50; median particle size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
Particle diameter at the 50th percentile of a specified cumulative particle-size distribution, such that 50% of the declared distribution weighting lies at or below that diameter.
Particle Size D 90
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleSizeD90- Type
- Class, Characteristic
- altLabel
- D90
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
Particle diameter at the 90th percentile of a specified cumulative particle-size distribution, such that 90% of the declared distribution weighting lies at or below that diameter.
Particle Size Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleSizeMeasurement- Type
- Class, Measurement
- altLabel
- laser diffraction particle size analysis; particle size; particle size analyzer measurement
Measurement of ZrB2 powder particle size (as-received and after milling).
Particle Size Span
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleSizeSpan- Type
- Class, Characteristic
- altLabel
- Span
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting Span of DLS size distribution: (D90 - D10) / D50.
Particle Volume Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleVolumeConcentration- Type
- Class, Characteristic
- altLabel
- particle concentration; solid volume concentration; vol.%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
A property denoting particle volume concentration of ink samples used in DLS dilution study.
Particle Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleVolumeFraction- Type
- Class, Characteristic
- altLabel
- catalyst (including support) volume fraction; ε_cat; φ_Pt/C
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A composition characteristic expressing the volume occupied by particle divided by the stated total reference volume.
Particle Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleWidth- Type
- Class, Characteristic
- altLabel
- rod width
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting width of rodlike particles/aggregates (reported for some TEM/cryo-TEM observations).
Particle-characterization measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticleCharacterizationMeasurement- Type
- Class, Measurement
A characterization measurement that determines particle size, size distribution, aggregation, sedimentation, or related particulate characteristics.
Particles Per Agglomerate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ParticlesPerAgglomerate- Type
- Class, Characteristic
- altLabel
- # particles /agglomerate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A property denoting number of primary particles per agglomerate (mentioned as an ink-stage descriptor; no numeric values in this source).
Pattern Surface Coverage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PatternSurfaceCoverage- Type
- Class, Characteristic
- altLabel
- surface coverage
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaFraction
A property denoting pattern surface coverage and determined in Atomic Force Microscopy Measurement.
Pb S Quantum Dot
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PbSQuantumDot- Type
- Class, Matter
- altLabel
- PbS colloidal quantum dot; lead sulfide quantum dot
PbS colloidal quantum dot absorber material discussed throughout the review.
PBI 11
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PBI11- Type
- Class, Matter
Specific PBI fraction used as catalyst binder (nominal Mw=1.10×10^4 g/mol).
PBI 174
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PBI174- Type
- Class, Matter
Specific PBI fraction used as catalyst binder (nominal Mw=17.4×10^4 g/mol).
PBI 46
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PBI46- Type
- Class, Matter
Specific PBI fraction used as catalyst binder (nominal Mw=4.64×10^4 g/mol).
PBI 90
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PBI90- Type
- Class, Matter
Specific PBI fraction used as catalyst binder (nominal Mw=9.00×10^4 g/mol).
Pd Nanoparticle Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PdNanoparticleDiameter- Type
- Class, Characteristic
- altLabel
- diameter of Pd nanoparticles
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting pd nanoparticle diameter and determined in Transmission Electron Microscopy Imaging.
Pd On Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PdOnCarbonCatalyst- Type
- Class, Matter
A material entity corresponding to a pd on carbon catalyst and used as an input in Catalyst Ink Preparation.
PDL
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PDL- Type
- Class, Matter
- altLabel
- PDL-DL 30
Biocompatible elastomeric copolymer (poly(ω-pentadecalactone-co-e-decalactone)) forming the ink matrix and cured polymer substrate.
PDL Ag NW Composite Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PDLAgNWCompositeInk- Type
- Class, Matter
- altLabel
- PDL/AgNW composite; PDL/AgNW ink; electronic ink
Composite electronic ink consisting of PDL + AgNW dispersion in THF/ethanol; used for spin-coated electrodes and DIW-printed sensors.
PDMS Base To Catalyst Weight Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PDMSBaseToCatalystWeightRatio- Type
- Class, Characteristic
- altLabel
- base-to-catalyst ratio; base:catalyst ratio; weight ratio 10:1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A dimensionless characteristic expressing the stated ratio identified as PDMS Base To Catalyst Weight Ratio.
Peak Current
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PeakCurrent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrent | http://qudt.org/vocab/unit/MicroA
A property denoting peak current and determined in Square Wave Voltammetry.
Peak Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PeakPotential- Type
- Class, Characteristic
- altLabel
- CO stripping peak position; CO stripping peak potential; stripping potential
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
A property denoting peak potential and determined in Square Wave Voltammetry, Cyclic Voltammetry, and Cathodic Stripping Voltammetry.
Peak Power Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PeakPowerDensity- Type
- Class, Characteristic
- altLabel
- Pmax; maximum power density; power peak
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PowerDensity
http://qudt.org/vocab/quantitykind/PowerDensity
Maximum electrical output power per declared electrode-area, system-volume or mass reference, obtained over a specified operating curve under stated conditions.
Peak To Peak Separation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PeakToPeakSeparation- Type
- Class, Characteristic
- altLabel
- Epp
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Voltage | http://qudt.org/vocab/unit/V
A property denoting peak-to-peak potential separation in CV, used as a criterion for catalytic activity/reversibility in I3-/I- redox.
PEG Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PEGWeightPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the mass percentage assigned to peg on the stated reference basis.
Pellet Annealing Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PelletAnnealingTemperature- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with pellet annealing.
Pellet Annealing Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PelletAnnealingTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with pellet annealing.
Pellet Compression Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PelletCompressionProcess- Type
- Class, Manufacturing
- altLabel
- compressed pellet
Compression of graphene film into pellet to improve conductivity.
PEMFCCFD Simulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PEMFCCFDSimulation- Type
- Class, Process
- altLabel
- Ansys simulation; CFD simulation; Direct numerical simulations (DNS) in Comsol
A computational-fluid-dynamics model execution that predicts flow, species transport, and coupled electrochemical behavior in a proton-exchange-membrane fuel cell under stated boundary conditions.
Pemion HNN 8
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PemionHNN8- Type
- Class, Matter
- altLabel
- HNN8
Commercial hydrocarbon ionomer used in electrodes for performance analysis; no exact term found in ontology.
Pemion PP 1 HNN 4 00 X
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PemionPP1HNN4_00_X- Type
- Class, Matter
- altLabel
- HNN4
Pemion PP1-HNN4-00-X, a commercial sulfo-phenylated polyphenylene proton-exchange ionomer grade supplied by Ionomr Innovations.
Pemion PP 1 HNN 9 00 X
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PemionPP1HNN9_00_X- Type
- Class, Matter
- altLabel
- HNN9
Pemion PP1-HNN9-00-X, a commercial sulfo-phenylated polyphenylene proton-exchange ionomer grade supplied by Ionomr Innovations.
Perchloric Acid Electrolyte
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PerchloricAcidElectrolyte- Type
- Class, Matter
- altLabel
- HClO4 electrolyte
Aqueous perchloric acid electrolyte used for CV and CO-stripping in the three-electrode cell.
Performance Benefit Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PerformanceBenefitPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting reported percent performance benefit (e.g., power density increase) from a pretreatment/activation step.
Performance characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PerformanceCharacteristic- Type
- Class, Characteristic
A property describing functional output, efficiency, capacity, power, or operational effectiveness.
- subclasses
- Carbon Yield, Ceramic Yield, Charge Storage Capacity, CNT Growth Yield Percent, CO 2 Conversion, COD Removal Efficiency, Coulombic Efficiency, Current Efficiency, Degradation characteristic, Double Bond Conversion Rate, Efficiency Retention Percent, Energy Efficiency, Ferritin Iron Ion Capacity, Furfural Conversion, Graphene Flake Yield, Incident Photon To Current Efficiency, Initial Catalytic Activity Loss Percent, Ion Exchange Capacity, Ionomer Adsorption Capacity Per Mass, Ionomer Adsorption Capacity Per Surface Area, LED luminous efficacy, Light Source Power, Low Activity Pt Particle Fraction, Mass Activity, Mass Activity Loss Percent, Maximum Reduction Conversion Rate, Methane Conversion, Monomer Conversion, Peak Power Density, Performance Benefit Percent, Peroxide Yield, Photodegradation Efficiency, Photoluminescence Quantum Yield, Power Conversion Efficiency, Power Density, Power Density Increase Percent, Power Loss Percent, Pt Loading Per Power, Pt Mass Per Power, Pt Mass Specific Peak Power Density, Pt Mass Specific Power Density, Pulse Power Density, Relative Increase In Peak Power Density, Ring Collection Efficiency, Sonication Power, Specific Area Activity At 0 p 9 V
Peristaltic Pump
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PeristalticPump- Type
- Class, Instrument
- altLabel
- low flow rate peristaltic pump; precise pump
Pump used to feed liquid methanol solution to anode at fixed flow rate.
Peroxide Yield
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PeroxideYield- Type
- Class, Characteristic
- altLabel
- H2O2 yield; hydrogen peroxide yield
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
The fraction of molecular oxygen consumed in an oxygen-reduction reaction that forms hydrogen peroxide or hydroperoxide, expressed as a fraction or percentage and inferred from rotating ring-disk electrode currents using the calibrated ring collection efficiency.
Person
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Person- Type
- Class, Agent
A human agent associated with a scientific activity or resource.
- subclassOf / subPropertyOf
- Agent
PESPVP Composite Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PESPVPCompositeMembrane- Type
- Class, Matter
- altLabel
- PES–PVP membrane
A membrane comprising a blend or composite of polyethersulfone and polyvinylpyrrolidone.
PET Nonwoven
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PETNonwoven- Type
- Class, Matter
- altLabel
- PET nonwoven matrix
Poly(ethylene terephthalate) nonwoven reinforcement used to form composite membrane.
PET Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PETSubstrate- Type
- Class, Matter
- altLabel
- flexible PET sheet
Poly(ethylene terephthalate) flexible polymer substrate on which Pd ink is printed and Cu is electrolessly deposited.
Petroleum Benzene
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PetroleumBenzene- Type
- Class, Compatibility
Solvent used in preparation of conductive ink.
PFSA Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PFSAIonomer- Type
- Class, Matter
- altLabel
- PFSA; perfluorosulfonic acid ionomer; short side chain PFSA
Perfluorosulfonic acid (PFSA) ionomer used as binder/proton conductor.
PGM On Support Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PGMOnSupportWeightPercent- Type
- Class, Compatibility
- altLabel
- PGM-on-support; wt% PGM-on-support
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic that represents pgm on support weight percent for a material, component, process, measurement, or hydrogen-electrochemical system.
pH Meter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#pHMeter- Type
- Class, Instrument
An instrument corresponding to a pH meter and used in surface basicity measurement.
Phase Transition Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhaseTransitionTemperature- Type
- Class, Characteristic
- altLabel
- β→α phase transition; β→α transition temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A property denoting phase transition temperature and determined in Differential Scanning Calorimetry Measurement.
Phosphate Buffered Saline
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhosphateBufferedSaline- Type
- Class, Matter
- altLabel
- PBS
Physiological saline buffer used during long-term cyclic straining tests and/or sample handling.
Phosphoric Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhosphoricAcid- Type
- Class, Matter
- altLabel
- orthophosphoric acid
Matter: phosphoric acid used for membrane doping and present in cathode CL; can poison Pt in HT-PEMFC.
Phosphoric Acid Adsorption Energy On Pt
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhosphoricAcidAdsorptionEnergyOnPt- Type
- Class, Characteristic
- altLabel
- PA adsorption energy on Pt; PA adsorption energy on Pt surface; adsorption energy (PA on Pt)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/EnergyPerAmountOfSubstance
A property denoting computed adsorption energy of phosphoric acid on Pt surface (DFT).
Phosphoric Acid Binding Energy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhosphoricAcidBindingEnergy- Type
- Class, Characteristic
- altLabel
- E_PA-binding; PA binding energy
- QUDT guidance
- http://qudt.org/vocab/quantitykind/EnergyPerAmountOfSubstance
A property denoting computed binding energy between phosphoric acid and polymer repeat unit (DFT).
Phosphoric Acid Doped PESPVP Composite Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhosphoricAcidDopedPESPVPCompositeMembrane- Type
- Class, Matter
- altLabel
- PA doped membrane; PA/PES–PVP membrane
PES–PVP based membrane after phosphoric acid (PA) doping for HT-PEMFC use.
Phosphoric Acid Doping
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhosphoricAcidDoping- Type
- Class, Manufacturing
- altLabel
- PA-doped PBI membrane; acid doped; doped with phosphoric acid
Doping of electrodes/membrane with phosphoric acid (2 M electrode doping; membrane doped in ~11 M H3PO4).
Phosphoric Acid Loading
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhosphoricAcidLoading- Type
- Class, Characteristic
- altLabel
- H3PO4 loading in CL; PA loading
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerArea
The mass of phosphoric acid added to a cathode catalyst layer divided by the geometric electrode area to which the acid is applied.
Phosphoric Acid Protonated Polybenzimidazole
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhosphoricAcidProtonatedPolybenzimidazole- Type
- Class, Matter
- altLabel
- phosphoric acid protonated PBI
Protonated N-substituted PBI using phosphoric acid (paper's 'PBI-P'), used as catalyst binder.
Phosphoric Acid Saturation In Cracks
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhosphoricAcidSaturationInCracks- Type
- Class, Characteristic
- altLabel
- PA content in cracks; acid saturation in cracks; crack flooding saturation
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A dimensionless characteristic expressing the stated ratio identified as Phosphoric Acid Saturation In Cracks.
Phosphoric Acid Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhosphoricAcidWeightPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the mass percentage assigned to phosphoric acid on the stated reference basis.
Photo Acid Generator PAG 169
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotoAcidGeneratorPAG169- Type
- Class, Matter
- altLabel
- Irgacure PAG 169; photo-acid generator
Photo-acid generator used to catalyze SU-8 crosslinking and QD–polymer interactions.
Photocatalytic Degradation Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotocatalyticDegradationMeasurement- Type
- Class, Measurement
- altLabel
- photocatalytic degradation
Photocatalytic activity measurement tracking pollutant (RhB) degradation under visible light over time.
Photochemical curing process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotochemicalCuringProcess- Type
- Class, Manufacturing
A chemical-reaction process in which incident radiation initiates or drives reactions that harden or cross-link a material.
Photocurable DIW Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotocurableDIWInk- Type
- Class, Compatibility
- altLabel
- photocurable ink (DIW)
Viscous DIW ink (GMA/Ebecryl 8804 + additives) photocured after printing.
Photodegradation Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotodegradationDataset- Type
- Class, Data
- altLabel
- photodegradation data
Dataset containing RhB concentration/degradation vs irradiation time and kinetic analysis.
Photodegradation Efficiency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotodegradationEfficiency- Type
- Class, Characteristic
- altLabel
- decomposition efficiency; degradation efficiency; discoloration efficiency
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting percent degradation of Rhodamine B concentration after irradiation time (typically 90 min).
Photoinitiator 184
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Photoinitiator184- Type
- Class, Matter
Photoinitiator component in the mixed photoinitiator system for UV curing.
Photoinitiator TPOL
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotoinitiatorTPOL- Type
- Class, Matter
- altLabel
- TPO-L
Photoinitiator component in the mixed photoinitiator system for UV curing.
Photolithography Patterning
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotolithographyPatterning- Type
- Class, Manufacturing
- altLabel
- photolithographic patterning
UV lithography process applied to QD photoresists for micropatterns.
Photoluminescence Decay Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotoluminescenceDecayTime- Type
- Class, Characteristic
- altLabel
- PL decay time; decay time 3.6 ns; decay time 8.7 ns
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time
A property denoting time constant(s) from time-resolved PL decay curves (ns).
Photoluminescence Quantum Yield
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotoluminescenceQuantumYield- Type
- Class, Characteristic
- altLabel
- QY; absolute quantum yield; quantum yield
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting photoluminescence quantum yield; monitored during ligand exchange and thermal stability testing.
Mappings
- skos:broadMatch
https://w3id.org/nfdi4cat/voc4cat_0005005 (yield)
Photoluminescence spectroscopy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotoluminescenceSpectroscopyMeasurement- Type
- Class, Measurement
- altLabel
- Photoluminescence Spectroscopy Measurement; photoluminescence spectra
Optical spectroscopy measurement of photoluminescence (spectrum) referenced in the review.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0000773 (photoluminescence spectroscopy)
Photopolymer Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotopolymerResin- Type
- Class, Matter
- altLabel
- photocurable resin
Generic photocurable resin used for DLP printing (matrix materials).
Photovoltaic device
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotovoltaicDevice- Type
- Class, Matter
A device that converts incident electromagnetic radiation into electrical energy by a photovoltaic effect.
- subclassOf / subPropertyOf
- Device
Photovoltaic JV Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhotovoltaicJVMeasurement- Type
- Class, Measurement
Photovoltaic current-voltage measurement under illumination used to derive PCE, Voc, Jsc, FF.
Physical Properties Table 2
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhysicalPropertiesTable2- Type
- Class, Compatibility
A data resource used to represent physical properties table 2.
Physical Surface Area Pt Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhysicalSurfaceAreaPtCatalyst- Type
- Class, Characteristic
- altLabel
- Pt catalytic surface area; Pt physical surface area; physical surface area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerMass
A property denoting physical Pt surface area of Pt/C catalyst used to normalize ECSA for Pt utilization (cm2 mg_Pt^-1).
Physical-property measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PhysicalPropertyMeasurement- Type
- Class, Measurement
A characterization measurement that determines a physical characteristic not represented by a more specific measurement branch.
- subclasses
- Archimedes Density Measurement, Catalyst Layer Thickness Measurement, Contact Angle Measurement, Critical Crack Thickness Measurement, Density Measurement, Electrical Resistivity Measurement, Film Thickness Measurement, Four Probe Resistance Measurement, Membrane Thickness Measurement, Microporous Layer Thickness Measurement, Pycnometry Measurement, Solid Content Measurement, Water Content Measurement
Pigment Cyan 153
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PigmentCyan153- Type
- Class, Matter
- altLabel
- Cyan 15:3 pigment
C.I. Pigment Blue 15:3, the beta-crystalline copper-phthalocyanine pigment used as a blue or cyan colorant.
Pigment Cyan 153 Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PigmentCyan153Mass- Type
- Class, Characteristic
- altLabel
- Pigment Cyan 15:3; pigment mass
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of pigment cyan 153.
Pillar Height
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PillarHeight- Type
- Class, Characteristic
A property denoting height of an individual printed pillar (controlled by extruded volume and motion profile).
PIM 1
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PIM1- Type
- Class, Matter
PIM-1, a nitrile-bearing polymer of intrinsic microporosity whose rigid, contorted backbone frustrates efficient chain packing.
PIM Tz
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PIMTz- Type
- Class, Matter
A tetrazole-functionalized derivative of PIM-1 obtained by conversion of nitrile groups into tetrazole groups.
PIMAO
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PIMAO- Type
- Class, Matter
An amidoxime-functionalized derivative of PIM-1 obtained by conversion of nitrile groups into amidoxime groups.
PIMCONH 2
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PIMCONH2- Type
- Class, Matter
An amide-functionalized derivative of PIM-1 obtained by conversion of nitrile groups into carboxamide groups.
PIMCOOH
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PIMCOOH- Type
- Class, Matter
A carboxylic-acid-functionalized derivative of PIM-1 obtained by conversion of nitrile groups into carboxylic-acid groups.
Piston Displacement A 1
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PistonDisplacementA1- Type
- Class, Characteristic
- altLabel
- extrusion piston displacement; ΔA1
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
The downward displacement of the dispensing piston during the extrusion stroke used to deliver ink for one printed pillar.
Piston Displacement A 2
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PistonDisplacementA2- Type
- Class, Characteristic
- altLabel
- retraction piston displacement; ΔA2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
The upward retraction displacement of the dispensing piston applied after pillar stretching to halt ink delivery.
Pixel Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PixelSize- Type
- Class, Characteristic
- altLabel
- image pixel size; nm per pixel
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/NanoM
A geometric characteristic specifying pixel size under the conditions and reference basis stated with the record.
Planetary Centrifugal Mixer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlanetaryCentrifugalMixer- Type
- Class, Instrument
Mixer used for mixing and degassing inks before bead milling.
Planetary Mixer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlanetaryMixer- Type
- Class, Instrument
- altLabel
- Thinky ARV-310LED planetary vacuum mixer; Thinky-AR100 centrifugal ball milling mixer; planetary mixer/deaerator
Planetary mixer used to disperse powders and homogenize suspensions.
Plasma Enhanced Chemical Vapor Deposition Synthesis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlasmaEnhancedChemicalVaporDepositionSynthesis- Type
- Class, Manufacturing
- altLabel
- PECVD; Plasma Enhanced Chemical Vapor Deposition
VACNT growth on Al foil via plasma-enhanced CVD (H2 plasma + C2H4 feed).
Plasma Enhanced Chemical Vapor Deposition System
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlasmaEnhancedChemicalVaporDepositionSystem- Type
- Class, Instrument
PECVD reactor for VACNT growth (instrument/system).
Plasma Etching
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlasmaEtching- Type
- Class, Manufacturing
- altLabel
- plasma-etched Nafion
Process for surface modification/patterning of PEM using plasma etching (used to increase roughness / interfacial area).
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001560 (plasma etching)
Plasmon Peak Wavelength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlasmonPeakWavelength- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting plasmon peak wavelength and determined in UV Visible Spectroscopy Measurement.
Plasticizer ATBC
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlasticizerATBC- Type
- Class, Matter
- altLabel
- ATBC
Acetyl tributyl citrate, a citrate-ester plasticizer added to polymer formulations to modify flexibility and processing behavior.
Plasticizer ATBC Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlasticizerATBCMass- Type
- Class, Characteristic
- altLabel
- ATBC mass; Plasticizer (ATBC)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of plasticizer atbc.
Plate Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlateDiameter- Type
- Class, Characteristic
- altLabel
- parallel plate diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of plate.
Plateau Loss Modulus
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlateauLossModulus- Type
- Class, Characteristic
- altLabel
- G0″
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Modulus
A property denoting plateau (low-strain) loss modulus used together with G0′ to determine rheological percolation threshold.
Plateau Storage Modulus
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlateauStorageModulus- Type
- Class, Characteristic
- altLabel
- G0′
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Modulus
A property denoting plateau (low-strain) storage modulus extrapolated from 0.01–0.03% strain data.
Platinum
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Platinum- Type
- Class, Matter
- altLabel
- Pt plate
Platinum counter electrode used in 3-electrode configuration.
Platinum Black Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumBlackCatalyst- Type
- Class, Matter
- altLabel
- cathode catalyst; platinum black (ETEK)
Unsupported platinum catalyst (metal black) used for DMFC cathode catalyst layers.
Platinum Coated Glass Slide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumCoatedGlassSlide- Type
- Class, Matter
- altLabel
- Pt-coated glass slide
Glass slide sputter-coated with Pt film (10 nm) used as working electrode substrate for electrochemical measurements.
Platinum density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumDensity- Type
- Class, Characteristic
- altLabel
- catalyst active particle density
- notation
- rhoPt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassDensity | http://qudt.org/vocab/unit/GM-PER-M3 | Value-free QUDT guidance for Platinum density; the curated source reports [g/m^3].
Mass density of platinum used to relate platinum loading to the amount and surface coverage of catalyst particles.
Platinum particle radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumParticleRadius- Type
- Class, Characteristic
- altLabel
- catalyst active particle radius
- notation
- rPt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/M | Value-free QUDT guidance for Platinum particle radius; the curated source reports [m]. Profile context: The ITC model uses the radius of hemispherical platinum nanoparticles to determine platinum surface coverage.
Radius of the hemispherical platinum nanoparticles used to determine platinum surface coverage in the model.
Platinum Weight Percent In Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumWeightPercentInCatalyst- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting platinum weight percent in catalyst.
Platinum Weight Percent In Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumWeightPercentInCatalystLayer- Type
- Class, Characteristic
- altLabel
- Pt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting eDS-reported normalized platinum concentration in catalyst layer (wt.%).
Platinum Wire Counter Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumWireCounterElectrode- Type
- Class, Matter
- altLabel
- Pt wire counter electrode
A platinum wire used as the counter electrode to carry the balancing current in an electrochemical cell.
Platinum-carbon pore-wall contact angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumCarbonPoreWallContactAngle- Type
- Class, Characteristic
- altLabel
- CCL contact angle of PtC pore wall
- notation
- thetaPt/C
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle | http://qudt.org/vocab/unit/DEG | Value-free QUDT guidance for Platinum-carbon pore-wall contact angle; the curated source reports [deg].
Effective water contact angle of the uncovered platinum-on-carbon pore wall determined from the surface contributions of platinum and carbon.
Platinum-surface water contact angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumSurfaceWaterContactAngle- Type
- Class, Characteristic
- altLabel
- catalyst active particle contact angle
- notation
- thetaPt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle | http://qudt.org/vocab/unit/DEG | Value-free QUDT guidance for Platinum-surface water contact angle; the curated source reports [deg].
Water contact angle of the bare platinum surface used to describe its intrinsic wettability.
Platinum-surface-induced ionomer alignment degree
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumSurfaceInducedIonomerAlignmentDegree- Type
- Class, Characteristic
- notation
- deltaDA,Pt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for Platinum-surface-induced ionomer alignment degree; the curated source reports [-].
Degree of molecular alignment induced in the adjacent ionomer film by the platinum surface.
Platinum-to-carbon mass ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PlatinumToCarbonMassRatio- Type
- Class, Characteristic
- altLabel
- catalyst-support ratio
- notation
- mPt:C
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/UNITLESS | Value-free QUDT guidance for Platinum-to-carbon mass ratio; the curated source reports [-].
Mass ratio of platinum catalyst to carbon support in the catalyst layer.
PLGA
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PLGA- Type
- Class, Matter
- altLabel
- PLGA (82:18)
Poly(lactic-co-glycolic acid), a copolymer containing lactic-acid-derived and glycolic-acid-derived repeat units.
Pneumatic Dispenser
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PneumaticDispenser- Type
- Class, Instrument
- altLabel
- high-precision dispenser (Ultimus V)
Controls pneumatic-driven extrusion pressure for DIW inks.
Pneumatic Jack
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PneumaticJack- Type
- Class, Instrument
An instrument corresponding to a pneumatic jack and used in Through Plane Electronic Conductivity Measurement.
Polarization Curve Analysis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolarizationCurveAnalysis- Type
- Class, Process
- altLabel
- fuel-cell polarization analysis
A post-processing analysis process that analyzes raw polarization-curve data to derive summarized fuel-cell performance outputs.
Polarization Curve Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolarizationCurveDataset- Type
- Class, Data
- altLabel
- I-V curve dataset; IV curve data; polarization curve data
Polarization curves (U-I / I-V) measured at different RH and degradation states.
Polarization Curve Fitting
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolarizationCurveFitting- Type
- Class, Process
- altLabel
- Eq. (1) fitting
Empirical fitting of polarization curves using Eq. (1) to extract i0, i_n, r, m, n.
Polarization Point Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolarizationPointDuration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the duration of polarization point.
Polarization Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolarizationResistance- Type
- Class, Characteristic
- altLabel
- Rp
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance
A property denoting resistance associated with polarization (semi-circle diameter / fitted circuit), includes charge transfer and diffusion contributions per authors.
Poly Acrylic Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyAcrylicAcid- Type
- Class, Matter
- altLabel
- PAA
Hydrocarbon polymer scaffold component of the PAA/PVA hydrogel electrolyte.
Poly Acrylic Acid Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyAcrylicAcidMassFractionInInk- Type
- Class, Characteristic
- altLabel
- PAA wt.% in ink
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Poly Acrylic Acid Mass Fraction In Ink.
Poly L Lysine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyLLysine- Type
- Class, Matter
- altLabel
- poly-L-lysine (PLL)
Surface coating to promote cell adhesion during cytocompatibility assays.
Poly Vinyl Alcohol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyVinylAlcohol- Type
- Class, Matter
- altLabel
- PVA
Hydrocarbon polymer scaffold component of the PAA/PVA hydrogel electrolyte.
Polybenzimidazole
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Polybenzimidazole- Type
- Class, Matter
Polybenzimidazole polymer binder/ionomer used in HT-PEMFC electrodes (not PFSA).
Polycarbosilane Preceramic Polymer SMP 10
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolycarbosilanePreceramicPolymerSMP10- Type
- Class, Matter
- altLabel
- SMP-10
SiC-yielding preceramic polymer (Starfire Systems SMP-10) used as ink binder/matrix precursor.
Polydimethylsiloxane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Polydimethylsiloxane- Type
- Class, Matter
A material entity corresponding to a polydimethylsiloxane and used as an input in Rheology Measurement and Selective Coaxial Ink 3 D Printing.
Polydispersity Index
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolydispersityIndex- Type
- Class, Compatibility
- altLabel
- Mw/Mn; PD index; PDI
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A dimensionless measure of the breadth of the distribution of decay rates obtained by cumulant analysis of a dynamic-light-scattering correlation function, equal to the second cumulant divided by the square of the mean decay rate.
Polyethersulfone
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Polyethersulfone- Type
- Class, Matter
- altLabel
- polyethersulfone (PES)
Polymer blended with PVP to form membrane matrix.
Polyethylene Glycol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyethyleneGlycol- Type
- Class, Matter
A material entity corresponding to a polyethylene glycol and used as an input in Catalyst Ink Preparation and Solvent Property Measurement.
Polyethylene Glycol 1000
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyethyleneGlycol1000- Type
- Class, Matter
- altLabel
- PEG 1000
Polyethylene glycol (MW ~1000) used as rheological agent in geopolymer ink.
Polyethylene Oxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyethyleneOxide- Type
- Class, Matter
A material entity corresponding to a polyethylene oxide.
Polyethylene Terephthalate Fabric
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyethyleneTerephthalateFabric- Type
- Class, Matter
- altLabel
- PET fabric; polyester fabric; polyethylene terephthalate
Base polymer textile substrate (PET fabric) used for surface modification and printing.
Polyhedral Oligomeric Silsesquioxane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyhedralOligomericSilsesquioxane- Type
- Class, Matter
Hydrophobic cage-structured nanofiller added to cathode catalyst layer; varied at 0–20 wt% relative to Nafion ionomer in CCL.
Polymer Characterization Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymerCharacterizationMeasurement- Type
- Class, Measurement
- altLabel
- polymer characterization
A measurement process that uses polymer characterization measurement to determine Number Average Molecular Weight and Polymer P Ka.
Polymer Force Exponential Coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymerForceExponentialCoefficient- Type
- Class, Compatibility
- altLabel
- k2^(polymer)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A quantitative characteristic that represents polymer force exponential coefficient for a material, component, process, measurement, or hydrogen-electrochemical system.
Polymer Force Proportionality Constant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymerForceProportionalityConstant- Type
- Class, Compatibility
- altLabel
- k1^(polymer)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ForcePerLength
A quantitative characteristic that represents polymer force proportionality constant for a material, component, process, measurement, or hydrogen-electrochemical system.
Polymer Interaction Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymerInteractionDistance- Type
- Class, Compatibility
- altLabel
- L^(polymer)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic that represents polymer interaction distance for a material, component, process, measurement, or hydrogen-electrochemical system.
Polymer Mass Loss
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymerMassLoss- Type
- Class, Characteristic
- altLabel
- mass loss; mass loss (TGA); weight loss
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting mass loss attributed to grafted polymer decomposition in TGA.
Polymer material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymerMaterial- Type
- Class, Matter
A material entity whose functional composition or structure is dominated by one or more polymers.
- subclasses
- Aemion Ionomer, Anion Exchange Ionomer Powder, Cardo Based Acrylic Resin, DLP Elastomer Resin, DLP Plastic Resin, Epoxy Resin, Hydrocarbon Ionomer, I 2 Ionomer, Ionomer Film, Ketonic Resin, Molecularly Imprinted Polymer, Nafion Fiber Mat, Non Imprinted Polymer, PAAPVA Hydrogel, PFSA Ionomer, Photopolymer Resin, Poly Vinyl Alcohol, Polycarbosilane Preceramic Polymer SMP 10, Polyethylene Glycol, Polyethylene Glycol 1000, Polyethylene Oxide, Polyethylene Terephthalate Fabric, Polymeric Dispersant PD 1, Polymeric Dispersant PD 2, Polymeric Dispersant PD 3, Polymeric Dispersant PD 4, Polymethylsilsesquioxane Resin, Polypropylene Glycol 2000, PTFE Polymer, SPAEKTM Hydrocarbon Ionomer, SPEEK 64, SPFSO 2 NHGCIOH Ionomer, SU 8 Epoxy Resin, Tough Point Resin, UVMK Resin, UVMK T Resin
Polymer P Ka
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymerPKa- Type
- Class, Characteristic
- altLabel
- pKa
- QUDT guidance
- http://qudt.org/vocab/quantitykind/pKa
The negative base-10 logarithm of the acid dissociation constant of a specified ionizable group in a polymer, for a stated medium, temperature and equilibrium convention.
Polymer Solution Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymerSolutionConcentration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassConcentration
A composition characteristic specifying the amount of polymer solution per stated quantity of mixture or solution.
Polymeric Dispersant Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymericDispersantMass- Type
- Class, Characteristic
- altLabel
- Polymeric dispersant; dispersant mass
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of polymeric dispersant.
Polymeric Dispersant PD 1
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymericDispersantPD1- Type
- Class, Matter
- altLabel
- PD1; polymeric dispersant 1
Vegetable-oil-based polymeric dispersant prepared from epoxidized soybean oil with partial ring opening and Jeffamine M-2005 (Section 2.2.2).
Polymeric Dispersant PD 2
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymericDispersantPD2- Type
- Class, Matter
- altLabel
- PD2; polymeric dispersant 2
Vegetable-oil-based polymeric dispersant prepared from epoxidized soybean oil and Jeffamine M-2005 (Section 2.2.3).
Polymeric Dispersant PD 3
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymericDispersantPD3- Type
- Class, Matter
- altLabel
- PD3; polymeric dispersant 3
Vegetable-oil-based polymeric dispersant prepared from epoxidized soybean oil and polypropylene glycol (Section 2.2.4).
Polymeric Dispersant PD 4
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymericDispersantPD4- Type
- Class, Matter
- altLabel
- PD4; polymeric dispersant 4
Vegetable-oil-based polymeric dispersant prepared from epoxidized castor oil and Jeffamine M-2005 (Section 2.2.5).
Polymerization Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymerizationDuration- Type
- Class, Characteristic
- altLabel
- polymerization time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the duration of polymerization.
Polymethylsilsesquioxane Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolymethylsilsesquioxaneResin- Type
- Class, Matter
- altLabel
- MK resin
Preceramic silicone resin precursor (Wacker SILRES MK) used as base polymer for UV-curable ink; precursor for SiOC ceramics.
Polypropylene Glycol 2000
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolypropyleneGlycol2000- Type
- Class, Matter
- altLabel
- polypropylene glycol
Polypropylene glycol of a commercial or nominal average molar-mass grade of approximately 2000 g mol⁻¹.
Polyvinyl Alcohol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyvinylAlcohol- Type
- Class, Compatibility
A identified as Polyvinyl Alcohol and used or produced in a hydrogen-electrochemical workflow.
Polyvinylidene Fluoride
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PolyvinylideneFluoride- Type
- Class, Matter
- altLabel
- Poly (1
Polymer binder material used in cathode catalyst layer; not found in ontology
Polyvinylpyrrolidone
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Polyvinylpyrrolidone- Type
- Class, Matter
- altLabel
- polyvinylpyrrolidone (PVP)
Hydrophilic polymer blended with PES; provides proton-accepting sites.
Pore Area Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PoreAreaFraction- Type
- Class, Characteristic
- altLabel
- crack area fraction; pore area %
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting area fraction (%) of pores on fracture surface (2D measurement).
Pore Major Axis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PoreMajorAxis- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting average major axis length of pores measured on fracture surfaces (µm).
Pore Minor Axis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PoreMinorAxis- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting average minor axis length of pores measured on fracture surfaces (µm).
Pore Radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PoreRadius- Type
- Class, Characteristic
- altLabel
- R_p; pore size bin radius; r_pore
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the radius of pore.
Pore Size Distribution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PoreSizeDistribution- Type
- Class, Characteristic
- altLabel
- PSD
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting the distribution of pore sizes within a material or structure as determined by pore-characterization measurements.
Pore Size Distribution Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PoreSizeDistributionDataset- Type
- Class, Data
- altLabel
- cumulative pore volume distribution; pore size distribution; pore size distribution curves
A dataset containing pore size distribution data generated by Nitrogen Physisorption Measurement, Mercury Intrusion Porosimetry Measurement, and FIBSEM Tomography Measurement.
Pore Size Distribution Peak Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PoreSizeDistributionPeakDiameter- Type
- Class, Characteristic
- altLabel
- peak diameter; pore diameter peak; pore size distribution peak
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
http://qudt.org/vocab/quantitykind/Length
A property denoting peak pore diameter(s) read from pore size distribution (PSD) derived from N2 desorption (NLDFT).
Pore Surface Area Fraction Below 20 nm
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PoreSurfaceAreaFractionBelow20nm- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting pore surface area fraction below 20 nm and determined in Nitrogen Physisorption Measurement.
Pore Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PoreVolumeFraction- Type
- Class, Characteristic
- altLabel
- crack volume fraction; w_k
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction | http://qudt.org/vocab/unit/PERCENT
A composition characteristic expressing the volume occupied by pore divided by the stated total reference volume.
Pore-radius axis data
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PoreRadiusAxisData- Type
- Class, Data
- altLabel
- pore size for PSD
- notation
- r
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/M | Value-free QUDT guidance for Pore-radius axis data; the curated source reports [m].
Array of pore-radius values used as the size axis for evaluating cathode-catalyst-layer pore-size and contact-angle distributions.
Porosimetry measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PorosimetryMeasurement- Type
- Class, Measurement
A characterization measurement that determines pore-size, pore-volume, or porosity characteristics from fluid intrusion, adsorption, imaging, or related observations.
Porosity Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PorosityMeasurement- Type
- Class, Measurement
- altLabel
- porosity evaluation from FIB-SEM; porosity ε; pycnometer density and porosity calculation
Determination of total and open porosity from bulk/apparent/true density (caliper/balance + helium pycnometry).
Porous Alumina Ceramic Carrier
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PorousAluminaCeramicCarrier- Type
- Class, Matter
- altLabel
- biomimetic porous ceramics; monolithic carrier; porous alumina ceramics
Sintered porous alumina monolith/catalyst carrier with hierarchical pores and biomimetic vein structure.
Porous Ceramic Property Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PorousCeramicPropertyDataset- Type
- Class, Data
Dataset of porous ceramic properties across processing conditions.
Porphyrin P
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PorphyrinP- Type
- Class, Compatibility
- altLabel
- dye sensitizer P; porphyrin photosensitizer
Porphyrin compound (abbreviated P in paper) used to sensitize TiO2 for visible-light photocatalysis.
Positioning Accuracy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PositioningAccuracy- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying positioning accuracy under the conditions and reference basis stated with the record.
POSS Content Relative To Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#POSSContentRelativeToIonomer- Type
- Class, Characteristic
- altLabel
- P0; P5; POSS mass content
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
The mass of polyhedral oligomeric silsesquioxane additive divided by the mass of ionomer in the specified catalyst-layer formulation, multiplied by 100 when expressed as a percentage.
Potassium Chloride Electrolyte
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotassiumChlorideElectrolyte- Type
- Class, Matter
- altLabel
- KCl electrolyte
Aqueous potassium chloride electrolyte used for CV/EIS measurements.
Potassium Content Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotassiumContentWeightPercent- Type
- Class, Characteristic
- altLabel
- Potassium content (wt.%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the mass percentage assigned to potassium content on the stated reference basis.
Potassium Geopolymer Lattice
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotassiumGeopolymerLattice- Type
- Class, Matter
- altLabel
- K-based geopolymer lattice
Potassium-based geopolymer lattice catalyst formulation (3D_K_GP).
Potassium Hydroxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotassiumHydroxide- Type
- Class, Matter
Alkali hydroxide used in activating solution.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_32035 (Potassium hydroxide)
Potassium Iodide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotassiumIodide- Type
- Class, Matter
Additive introducing KI buffer/shielding layer for stability.
Potassium Persulfate Initiator
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotassiumPersulfateInitiator- Type
- Class, Matter
- altLabel
- potassium persulfate
Free-radical initiator used to copolymerize styrene and DMAEMA; provides sulfate end groups.
Potassium Phosphate Buffer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotassiumPhosphateBuffer- Type
- Class, Matter
Potassium phosphate buffer electrolyte (pH 7.5) used in clean tests and MFC electrolyte.
Potassium Silicate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotassiumSilicate- Type
- Class, Matter
Potassium silicate solution used in activating solution for K-based geopolymer.
Potassium Sodium Tartrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotassiumSodiumTartrate- Type
- Class, Matter
Complexing agent in electroless copper plating bath (Solution A).
Potassium Sulfate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotassiumSulfate- Type
- Class, Matter
Supporting electrolyte used for methanol oxidation measurements.
Potential Cycling Activation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotentialCyclingActivation- Type
- Class, Process
- altLabel
- potential cycling
An electrochemical conditioning process that repeatedly varies electrode potential or cell voltage between specified limits to activate and stabilize an electrode assembly.
Potential Of Total Zero Charge
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotentialOfTotalZeroCharge- Type
- Class, Characteristic
- altLabel
- ptzc
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
A property denoting electrode potential where surface charge is zero; review cites ptzc for Pt(111) affecting ionomer adsorption.
Potential Ramp Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotentialRampTime- Type
- Class, Characteristic
- altLabel
- slope time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Duration | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with potential ramp.
Potential Window
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotentialWindow- Type
- Class, Characteristic
- altLabel
- potential range; potential swept between; potential window lower bound
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
An electrochemical characteristic specifying potential window under the conditions and reference basis stated with the record.
Potentiostatic Activation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PotentiostaticActivation- Type
- Class, Process
- altLabel
- constant voltage activation
An electrochemical conditioning process that holds an electrode at a specified potential or a cell at a specified voltage for activation and stabilization.
Powder Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PowderInk- Type
- Class, Matter
- altLabel
- printing ink
Extrudable ink containing powder particles, binder, plasticizer, surfactant and solvent.
Power Conversion Efficiency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PowerConversionEfficiency- Type
- Class, Characteristic
- altLabel
- PCE; conversion efficiency; device efficiency
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting solar-cell power conversion efficiency (output electrical power / incident light power).
Power Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PowerDensity- Type
- Class, Characteristic
- altLabel
- Pmax; maximum output density; peak power density
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PowerPerArea | http://qudt.org/vocab/unit/MilliW-PER-CentiM2
A property denoting power density normalized to Catalyst Mass and determined in MEAPolarization, Electrochemical Reaction Simulation, and Organic Flow Battery Polarization Measurement.
Power Density Increase Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PowerDensityIncreasePercent- Type
- Class, Characteristic
- altLabel
- % increase; % increase of maximum power density; power density increase
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting power density increase percent and determined in MEAPolarization and Fuel Cell Polarization Measurement.
Power Efficiency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PowerEfficiency- Type
- Class, Compatibility
- altLabel
- lm/W; maximum power efficiency 1.03 lm/W
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LuminousEfficacy
The luminous flux emitted by an LED device divided by its electrical input power under specified operating conditions.
Power Law Consistency Index
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PowerLawConsistencyIndex- Type
- Class, Characteristic
- altLabel
- K; consistency index
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ConsistencyIndex
A property denoting power law consistency index and determined in Rheology Measurement.
Power Law Flow Index
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PowerLawFlowIndex- Type
- Class, Characteristic
- altLabel
- flow behavior index n; flow index
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting flow behavior index n from power-law fit of viscosity vs shear rate; n<1 indicates shear-thinning.
Power Loss Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PowerLossPercent- Type
- Class, Characteristic
- altLabel
- power loss after AST
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting power loss percent.
Pre Carbonization Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PreCarbonizationProcess- Type
- Class, Manufacturing
- altLabel
- pre-carbonized
Pre-carbonization step at 450°C under N2 prior to annealing.
Pre Carbonization Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PreCarbonizationTemperature- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with pre carbonization.
Pre Carbonization Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PreCarbonizationTime- Type
- Class, Characteristic
- altLabel
- pre-carbonization duration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with pre carbonization.
Pre Purge Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrePurgeTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with pre purge.
Pre Reduction Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PreReductionTemperature- Type
- Class, Characteristic
- altLabel
- °C
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with pre reduction.
Pre Reduction Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PreReductionTime- Type
- Class, Characteristic
- altLabel
- reduction time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with pre reduction.
Precursor Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrecursorConcentration- Type
- Class, Characteristic
- altLabel
- catalyst ink concentration; ink concentration; porphyrin solution concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentration | http://qudt.org/vocab/unit/MOL-PER-L
A composition characteristic specifying the amount of precursor per stated quantity of mixture or solution.
Precursor Solution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrecursorSolution- Type
- Class, Matter
A material entity corresponding to a precursor solution and used as an input in Catalyst Impregnation.
Pressure Bonding Electrode Preparation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PressureBondingElectrodePreparation- Type
- Class, Manufacturing
- altLabel
- pressure-bonded electrode; pressure-bonding method
An electrode-preparation process that uses applied mechanical pressure to join or consolidate electrode layers or components.
Pressure characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PressureCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing pressure, pressure difference, or a pressure-dependent setting.
- subclasses
- Capillary Pressure In Membrane, Cell Pressure, Compression Pressure, Electrode Compression Pressure, Extrusion Pressure, Hot Press Pressure, Mercury Intrusion Pressure, Oxygen Partial Pressure, Print Pressure, Spray Air Pressure, Squeegee Pressure, Vacuum Chamber Pressure, Vacuum Pressure, Vapor Pressure
Pressure Dependent Gas Diffusion Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PressureDependentGasDiffusionResistance- Type
- Class, Characteristic
- altLabel
- R_MD; R_PD; pressure dependent resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/OxygenTransportResistance
A property denoting pressure-dependent component (molecular diffusion in large pores/diffusion media).
Pressure Independent Gas Diffusion Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PressureIndependentGasDiffusionResistance- Type
- Class, Characteristic
- altLabel
- R_NF; R_PI; pressure independent resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/OxygenTransportResistance
A property denoting pressure-independent component of transport resistance (Knudsen + ionomer film).
Pressure Regulator
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PressureRegulator- Type
- Class, Instrument
- altLabel
- electronic pressure regulating valve
Regulator controlling air pressure for spray atomization.
Primary Agglomerate Pore Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrimaryAgglomeratePoreSize- Type
- Class, Characteristic
- altLabel
- pores within primary agglomerates; primary pore size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting primary agglomerate pore size and determined in Literature Microstructure Compilation and Nitrogen Physisorption Measurement.
Print Job Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintJobDuration- Type
- Class, Characteristic
- altLabel
- print job
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Duration | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the duration of print job.
Print Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintPressure- Type
- Class, Characteristic
- altLabel
- applied pressure (bar); extrusion pressure; printing pressure
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A pressure characteristic specifying the pressure associated with print.
Print Resolution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintResolution- Type
- Class, Characteristic
- altLabel
- XY resolution
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying print resolution under the conditions and reference basis stated with the record.
Print Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintSpeed- Type
- Class, Characteristic
- altLabel
- mm/s; print head speed; printing speed
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Speed
A rate characteristic specifying the speed associated with print.
Printability Z Number
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintabilityZNumber- Type
- Class, Characteristic
- altLabel
- Z; Z number
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
The dimensionless inverse Ohnesorge number, equal to the square root of the product of liquid density, surface tension and stated characteristic jetting length divided by dynamic viscosity, used as an indicator of inkjet-fluid printability.
Printable Working Time Max
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintableWorkingTimeMax- Type
- Class, Characteristic
- altLabel
- working time max; working time window
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Duration | http://qudt.org/vocab/unit/HR
A property denoting printable working time max.
Printable Working Time Min
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintableWorkingTimeMin- Type
- Class, Characteristic
- altLabel
- working time min; working time window
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Duration | http://qudt.org/vocab/unit/HR
A property denoting printable working time min.
Printed Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedArea- Type
- Class, Characteristic
- altLabel
- printed catalyst area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
A geometric characteristic specifying the area associated with printed.
Printed CNT Structure Height
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedCNTStructureHeight- Type
- Class, Characteristic
- altLabel
- CNT height; height of CNT dots/lines
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting printed CNT structure height and determined in Stylus Profilometry Measurement.
Printed Composite Structure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedCompositeStructure- Type
- Class, Matter
- altLabel
- GO-lignin 3D-printed structure; composite GO-lignin 3D structures
3D-printed (pre-carbonization) composite structure obtained after DIW and freeze-drying or thermal drying.
Printed Ferritin Pre Catalyst Pattern
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedFerritinPreCatalystPattern- Type
- Class, Matter
- altLabel
- ink jet printed ferritin solution; printed pre-catalyst
Printed pattern/feature consisting of ferritin (or ferritin@surfactant) precursor on alumina/Si prior to pyrolysis.
Printed Gold Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedGoldElectrode- Type
- Class, Matter
- altLabel
- Au electrode; gold electrode; printed Au electrode
A material entity corresponding to a printed gold electrode and used as an input in Cyclic Voltammetry.
Printed Green Part
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedGreenPart- Type
- Class, Matter
- altLabel
- green part
As-printed (unsintered) ceramic part produced by DIW.
Printed Grid Structure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedGridStructure- Type
- Class, Matter
- altLabel
- cellular structure; struts
As-printed (UV-cured) 3D cellular structure before pyrolysis.
Printed Layer Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedLayerCount- Type
- Class, Characteristic
- altLabel
- number of printed layers (1 to 4)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying the number of printed layer.
Printed Line Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedLineWidth- Type
- Class, Characteristic
- altLabel
- line width; shell width; width of printed line
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the width of printed line.
Printed Pillar Array
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedPillarArray- Type
- Class, Matter
- altLabel
- free-standing pillar arrays; pillar arrays; printed pillars
Printed artifact consisting of periodically (or aperiodically) deposited vertical pillars.
Printed Trace Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintedTraceWidth- Type
- Class, Characteristic
- altLabel
- trace width; width of the silver trace
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting measured width of printed conductive silver trace in composite (µm).
Printer Filament Diameter Setting
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrinterFilamentDiameterSetting- Type
- Class, Characteristic
- altLabel
- "filament diameter" parameter; filament diameter setting
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A morphological characteristic describing printer filament diameter setting under the conditions and reference basis stated with the record.
Printing instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintingInstrument- Type
- Class, Instrument
A coating instrument that places material according to a controlled spatial pattern by a printing process.
Printing Layer Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintingLayerThickness- Type
- Class, Characteristic
- altLabel
- TL; TW; layer thickness
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the distance between the opposing bounding surfaces of printing layer.
Printing Parameter Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintingParameterSpecification- Type
- Class, Specification
- altLabel
- printing parameters
A specification of selected printing parameters, such as print speed, nozzle geometry, material-feed or deposition rate, and relevant environmental settings.
Printing Platform Stage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintingPlatformStage- Type
- Class, Matter
- altLabel
- linear stage; x-y-z stage
A component that supports and positions the build substrate or deposited structure in a printing system.
Printing withdrawal speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PrintingWithdrawalSpeed- Type
- Class, Characteristic
A speed characteristic specifying the withdrawal or vertical translation rate of a dispensing nozzle during direct-ink-writing deposition.
Probability Density Morphology Parameter K
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProbabilityDensityMorphologyParameterK- Type
- Class, Compatibility
- altLabel
- morphology factor k; parameter k
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A morphology coefficient used in a parameterized probability-density representation of material structure.
Probe microscope
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProbeMicroscope- Type
- Class, Instrument
An imaging instrument that scans a localized probe across a specimen surface.
Probe microscopy measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProbeMicroscopyMeasurement- Type
- Class, Measurement
An imaging measurement that scans a localized probe across a specimen to determine spatially resolved surface characteristics.
Mappings
- skos:narrowMatch
http://www.bioassayontology.org/bao#BAO_0000459 (scanning probe microscopy)
Procedure Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProcedureSpecification- Type
- Class, Specification
- altLabel
- curing procedure; experimental procedure; specified
A specification of the ordered operations, constituent amounts, conditions, and settings prescribed or recorded for a scientific or manufacturing procedure.
Mappings
- skos:broadMatch
http://semanticscience.org/resource/SIO_000090 (specification)
Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Process- Type
- Class, Process
An activity or temporal development in which matter or information is transformed, measured, analyzed, or used.
Procurement process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProcurementProcess- Type
- Class, Process
A manufacturing-support process through which a material, component, or specimen is obtained for subsequent workflow use.
Profilometer Sampling Step
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProfilometerSamplingStep- Type
- Class, Characteristic
- altLabel
- sampling step
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying profilometer sampling step under the conditions and reference basis stated with the record.
Profilometer Stylus Force
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProfilometerStylusForce- Type
- Class, Characteristic
- altLabel
- stylus force
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Force
A quantitative characteristic specifying profilometer stylus force under the conditions and reference basis stated with the record.
Profilometer Stylus Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProfilometerStylusSpeed- Type
- Class, Characteristic
- altLabel
- stylus speed
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Speed
A rate characteristic specifying the speed associated with profilometer stylus.
Profilometer Tip Radius
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProfilometerTipRadius- Type
- Class, Characteristic
- altLabel
- stylus radius; tip radius
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the radius of profilometer tip.
Mappings
- skos:broadMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tip_rad_xxx-c8b3c6933460431c9397a3fbe809cd7e-vp (Tip Radius)
Profilometer Tip Simulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProfilometerTipSimulation- Type
- Class, Process
- altLabel
- simulation of profilometer tip motion
A computational model execution that calculates geometric traversal or mechanical interaction of a specified profilometer tip with a surface to estimate the measured profile or tip-induced dimensional bias.
Profilometry Protocol Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProfilometryProtocolSpecification- Type
- Class, Specification
- altLabel
- profilometry protocol
A specification of a profilometry procedure and its selected instrument configuration, scan settings, reference surface, and data-analysis requirements.
Profilometry Sample Preparation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProfilometrySamplePreparation- Type
- Class, Manufacturing
A specimen-preparation process that mounts or otherwise prepares a coating or material surface for profiling against an appropriate reference surface or height datum.
Projection Number
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProjectionNumber- Type
- Class, Characteristic
- altLabel
- number of projections; projection count
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying the number assigned to projection.
Projector Light Intensity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProjectorLightIntensity- Type
- Class, Characteristic
- altLabel
- light intensity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Irradiance
A property denoting irradiance/intensity of DLP projector measured by radiometer (mW/cm2).
Property
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Property- Type
- Class, Characteristic
A characteristic that can be measured, computed, specified, or otherwise attributed to an entity.
- subclasses
- Categorical characteristic, Electrochemical characteristic, Mechanical characteristic, Optical characteristic, Performance characteristic, Quantitative characteristic, Spectroscopic characteristic, Structural characteristic, Surface characteristic, Thermal characteristic, Transport characteristic
Propylene Glycol 12
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PropyleneGlycol12- Type
- Class, Matter
Dispersion solvent: 1,2-propylene glycol (propylene glycol isomer).
Propylene Glycol 13
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PropyleneGlycol13- Type
- Class, Matter
Dispersion solvent: 1,3-propylene glycol (trimethylene glycol).
Propylene Glycol Methyl Ether Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PropyleneGlycolMethylEtherVolumeFraction- Type
- Class, Characteristic
- altLabel
- propylene glycol methyl ether; propylene glycol methyl ether vol%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
The volume of propylene glycol methyl ether used in the solvent mixture divided by the total solvent-volume basis specified for that mixture.
Propylene Glycol Monomethyl Ether
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PropyleneGlycolMonomethylEther- Type
- Class, Matter
- altLabel
- PGME; propylene glycol methyl ether
Eco-friendly industrial solvent used to disperse MSA-QDs and formulate inks.
Propylene Glycol Monomethyl Ether Acetate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PropyleneGlycolMonomethylEtherAcetate- Type
- Class, Matter
- altLabel
- PGMEA
Industrial solvent used to disperse MSA-QDs and as developer; also used as co-solvent in inks.
Protic Ionic Liquid Grafted Polybenzimidazole
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProticIonicLiquidGraftedPolybenzimidazole- Type
- Class, Matter
- altLabel
- ionic liquid grafted PBI; protic ionic liquid grafted PBI
PBI grafted with protic ionic liquid moieties (HTfO-protonated), used as catalyst binder (paper's 'PBI-F').
Protocol Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProtocolSpecification- Type
- Class, Specification
- altLabel
- EIS protocol; test protocol
A specification of a test or measurement procedure, including its selected operating conditions, controls, operation sequence, and analysis requirements.
Proton Conduct Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProtonConductLayer- Type
- Class, Matter
- altLabel
- layer X; proton transport layer
Pt-free sublayer (layer X) adjacent to PEM, mainly for proton transport simulation in MCL
Mappings
- skos:broadMatch
http://purl.obolibrary.org/obo/ENVO_01000281 (layer)
Proton Conduct Layer Thickness Fraction In MCL
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProtonConductLayerThicknessFractionInMCL- Type
- Class, Characteristic
- altLabel
- proportion in MCL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
The through-plane thickness of the designated proton-conducting sublayer divided by the total through-plane thickness of the cathode multilayer catalyst layer.
Proton Conductivity Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProtonConductivityMeasurement- Type
- Class, Measurement
- altLabel
- conductivity measurement; proton conductivity; proton conductivity / resistivity measurement (EIS under H2/N2)
Measurement of proton conductivity of PA-doped membrane (reported at 160°C).
Proton Exchange Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProtonExchangeMembrane- Type
- Class, Matter
- altLabel
- PEM
An ion-conducting membrane that preferentially transports protons while separating adjoining electrochemical compartments and limiting electronic conduction and undesired species crossover.
Protonated Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProtonatedMembrane- Type
- Class, Compatibility
A material entity corresponding to a protonated membrane and used as an input in MEAAssembly Process.
Protonic Catalyst Layer Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProtonicCatalystLayerResistance- Type
- Class, Characteristic
- altLabel
- R_ion; protonic CL resistance; protonic layer resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Resistance | http://qudt.org/vocab/unit/OHM
A property denoting protonic resistance of cathode catalyst layer (fitted with transmission line model from EIS).
Protonic Catalyst Layer Resistivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ProtonicCatalystLayerResistivity- Type
- Class, Characteristic
- altLabel
- proton resistivity; protonic resistivity; ρ_H+
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Resistivity
A property denoting protonic catalyst layer resistivity and determined in Electrochemical Impedance Spectroscopy Potentiostatic and Proton Conductivity Measurement.
Pseudo Boehmite
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PseudoBoehmite- Type
- Class, Matter
Aluminum oxyhydroxide precursor used as raw material, binder, and pore-forming agent.
Pseudo Double Layer Capacitance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PseudoDoubleLayerCapacitance- Type
- Class, Compatibility
- altLabel
- Cpd1; Cpdl
- QUDT guidance
- http://qudt.org/vocab/quantitykind/CapacitancePerArea
A property denoting pseudo double layer capacitance and determined in Electrochemical Impedance Spectroscopy Potentiostatic.
Pseudo First Order Rate Constant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PseudoFirstOrderRateConstant- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/FirstOrderRateConstant
A property denoting pseudo-first-order kinetic rate constant extracted from ln(C0/C) vs time for RhB degradation.
Pt 111 Surface
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Pt111Surface- Type
- Class, Matter
- altLabel
- Pt (111) single-crystal surface; Pt(111); platinum (111) surface
A material entity corresponding to a pt 111 surface and used as an input in Cyclic Voltammetry, X Ray Photoelectron Spectroscopy Measurement, and Atomic Force Microscopy Measurement.
Pt 3 Co On Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Pt3CoOnCarbonCatalyst- Type
- Class, Matter
- altLabel
- Pt3Co alloy catalyst
A carbon-supported platinum–cobalt alloy catalyst with a nominal platinum-to-cobalt atomic ratio of 3:1.
Pt Alloy Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtAlloyCatalyst- Type
- Class, Matter
- altLabel
- Pt alloy catalysts; Pt-Co alloy on carbon; Pt-Co catalyst
Advanced Pt-alloy ORR catalysts discussed in review (contrasted vs Pt/C).
Pt Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtAtomicPercent- Type
- Class, Characteristic
- altLabel
- EDX; Pt [atom%]; STEM-EDX
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AtomicPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting atomic percent of Pt in Pt/Ru catalyst particles or networks (from EDX).
Pt C To PBI Weight Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtCToPBIWeightRatio- Type
- Class, Characteristic
- altLabel
- Pt-C/PBI; [Pt-C]/[PBI] weight ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A dimensionless characteristic expressing the stated ratio identified as Pt C To PBI Weight Ratio.
Pt Chemical Surface Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtChemicalSurfaceArea- Type
- Class, Compatibility
- altLabel
- CSA; CSA(TEM); chemical surface area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerMass
A property denoting pt chemical surface area and determined in Electron Microscopy Imaging.
Pt Co On Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtCoOnCarbonCatalyst- Type
- Class, Matter
Catalyst material used (PtCo/C, 48.3 wt% Pt); no specific term found in ontology
Pt Counter Electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtCounterElectrode- Type
- Class, Matter
- altLabel
- platinized counter electrode
A platinum-containing electrode used as the counter electrode to carry the balancing current in an electrochemical cell.
Pt Crystal Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtCrystalDiameter- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of pt crystal.
Pt Crystal Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtCrystalThickness- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the distance between the opposing bounding surfaces of pt crystal.
Pt Crystallite Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtCrystalliteSize- Type
- Class, Characteristic
- altLabel
- Pt crystallite size (XRD); Scherrer; mean crystallite size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting pt crystallite size estimated from XRD (111) peak via Scherrer equation.
Pt Effectiveness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtEffectiveness- Type
- Class, Compatibility
- altLabel
- Ef_Pt; effectiveness of Pt; effectiveness of Pt (Ef_Pt)
A property denoting concept/metric linking transport through ionomer film to effective utilization of Pt (review cites Lee et al. model).
Pt Hydrogen Adsorption Specific Charge
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtHydrogenAdsorptionSpecificCharge- Type
- Class, Characteristic
- altLabel
- Pt specific charge; hydrogen adsorption charge constant; specific charge
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricChargeArealDensity
http://qudt.org/vocab/quantitykind/ElectricChargePerArea
The electrical charge associated with adsorption or desorption of hydrogen divided by the platinum surface area to which that charge is assigned, used as a calibration charge density for hydrogen-adsorption-based Pt surface-area determination.
Pt Ketjen Black Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtKetjenBlackCatalyst- Type
- Class, Matter
- altLabel
- Pt/K; Pt/Ketjen catalyst; graphitized Ketjen black supported Pt catalyst
A supported catalyst comprising platinum particles dispersed on Ketjen Black carbon.
Pt Loading
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtLoading- Type
- Class, Characteristic
- altLabel
- Pt catalyst loading; mg_Pt cm−2; µg_Pt cm^-2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerArea
A property denoting platinum mass per geometric area of CCM.
Pt Loading Per Power
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtLoadingPerPower- Type
- Class, Characteristic
- altLabel
- Pt loading (g/kW); Pt per power
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerPower
A performance characteristic specifying the rate of energy transfer associated with pt loading per.
Pt Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtMass_2- Type
- Class, Compatibility
- altLabel
- mg_Pt
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A scientific concept representing Pt Mass in the H₂KG domain model.
Pt Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtMass- Type
- Class, Characteristic
- altLabel
- gPt; mg_Pt; platinum mass
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of pt.
Pt Mass Fraction In Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtMassFractionInCatalyst- Type
- Class, Characteristic
- altLabel
- Pt content in catalyst; Pt mass fraction; platinum mass fraction in catalyst
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Pt Mass Fraction In Catalyst.
Pt Mass Per Power
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtMassPerPower- Type
- Class, Characteristic
- altLabel
- Pt per kW; Pt utilization (g_Pt kW^-1); gPt/kW
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerPower
A property denoting platinum mass required per unit power output (g_Pt per kW), used as a system-level Pt-usage metric in the review.
Pt Mass Specific Current
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtMassSpecificCurrent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentPerMass
A property denoting pt mass specific current and determined in MEAPolarization.
Pt Mass Specific Peak Power Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtMassSpecificPeakPowerDensity- Type
- Class, Characteristic
- altLabel
- Pt-mass specific power density; mass power; mass specific power density
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PowerPerMass
A property denoting peak power density normalized to Pt mass loading (specific power).
Pt Mass Specific Power Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtMassSpecificPowerDensity- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PowerPerMass
A property denoting Pt-mass-normalized power output at a specified current density (here 600 mA/cm²). Separate from peak mass-specific power.
Pt Mesoporous Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtMesoporousCarbonCatalyst- Type
- Class, Matter
A supported catalyst comprising platinum particles dispersed on a mesoporous-carbon support.
Pt NCNT Fs Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtNCNTFsCatalyst- Type
- Class, Matter
- altLabel
- Pt-NCNTFs; Pt-NCNTFs cathode catalyst
A supported catalyst comprising platinum-containing particles on nitrogen-doped carbon-nanotube frameworks.
Pt On Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtOnCarbonCatalyst- Type
- Class, Matter
- altLabel
- Pt/C catalyst; carbon-supported Pt nanoparticles; catalyst particles
Platinum on carbon catalyst powder used in cathode catalyst layer.
Pt On Carbon Catalyst Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtOnCarbonCatalystMassFractionInInk- Type
- Class, Characteristic
- altLabel
- Pt/C catalyst concentration; Pt/C wt.% in ink; Pt/Carbon (wt%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Pt On Carbon Catalyst Mass Fraction In Ink.
Pt On Carbon Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtOnCarbonWeightPercent- Type
- Class, Characteristic
- altLabel
- Pt mass fraction in Pt/C; Pt on carbon ratio; Pt wt% on carbon
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the mass percentage assigned to pt on carbon on the stated reference basis.
Pt On Nb B 2 Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtOnNbB2Catalyst- Type
- Class, Matter
- altLabel
- Pt/NbB2 catalyst
High-surface-area catalyst consisting of Pt deposited on NbB2 microparticles (homemade catalyst).
Pt On Orange Peel Activated Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtOnOrangePeelActivatedCarbonCatalyst- Type
- Class, Matter
- altLabel
- platinum loaded on activated carbon (Pt/OP-AC)
Platinum catalyst deposited on orange-peel activated carbon (OP-AC) support; evaluated for ORR (CV/LSV) and PEMFC cathode performance.
Pt Particle Diameter Increase Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtParticleDiameterIncreasePercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting percent increase in mean Pt particle diameter during conditioning/break-in.
Pt Particle Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtParticleSize- Type
- Class, Characteristic
- altLabel
- Pt nanoparticle size; Pt particle diameter; mean particle size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting size of Pt nanoparticles in Pt/C catalyst (nm scale).
Pt Poisoning by Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtPoisoningByIonomer- Type
- Class, Compatibility
- altLabel
- Pt anion poisoning; Pt poisoning; poisoning of Pt by sulfonic acid groups
A property denoting phenomenon/metric describing reduced ORR activity due to adsorption/poisoning of Pt by ionomer sulfonate groups (review discussion).
Pt Ru Black Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtRuBlackCatalyst- Type
- Class, Matter
- altLabel
- PtRu black; PtRu catalyst; PtRu catalyst (anode)
Unsupported PtRu alloy catalyst (metal black) used for DMFC anode catalyst layers.
Pt Ru On Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtRuOnCarbonCatalyst- Type
- Class, Matter
- altLabel
- Pt/Ru catalyst alloy; Pt/Ru electrocatalyst; Pt/Ru-C
Carbon-supported PtRu anode catalyst (paper)
Pt Ru On Carbon Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtRuOnCarbonWeightPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
The combined mass of platinum and ruthenium divided by the total dry mass of the PtRu/carbon supported catalyst, multiplied by 100.
Pt To Ru Atomic Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtToRuAtomicRatio- Type
- Class, Characteristic
- altLabel
- EDX; Pt/Ru; Pt/Ru ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Ratio
A property denoting atomic ratio Pt/Ru determined from EDX composition (dimensionless).
Pt Utilization
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtUtilization- Type
- Class, Characteristic
- altLabel
- ECSA utilization; U_Pt; catalyst utilization
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction of Pt that is electrochemically accessible (ratio of ECSA to theoretical surface area).
Pt Utilization Calculation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtUtilizationCalculation- Type
- Class, Process
- altLabel
- Pt utilization; TSA calculation; utilisation calculation
An analysis that calculates platinum utilization as electrochemically accessible platinum surface area divided by the corresponding physical platinum surface area on a consistent normalization basis.
Pt Utilization Relative Increase
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PtUtilizationRelativeIncrease- Type
- Class, Compatibility
- altLabel
- Pt utilization difference (structure 1 vs 2); relative utilization increase
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Fraction
A property denoting relative increase in mean current density per Pt surface (structure 1 reported 22% higher than structure 2).
PTFE Loading Fraction Of Solids
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PTFELoadingFractionOfSolids- Type
- Class, Characteristic
- altLabel
- HL; PTFE loading; PTFE loading (wt.% of solids)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
The mass of polytetrafluoroethylene divided by the total dry-solid mass of the specified ink or layer formulation.
PTFE Polymer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PTFEPolymer- Type
- Class, Matter
- altLabel
- PTFE; PTFE substrate film; polytetrafluoroethylene
Matter: polymer binder used in HT-PEMFC cathode catalyst layer.
PTFE Suspension 60 wt Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PTFESuspension60wtPercent- Type
- Class, Matter
Commercial PTFE aqueous suspension (nominally 60 wt.% PTFE; Chemours DISP 30) used in ink formulation.
Pulse Current
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PulseCurrent- Type
- Class, Characteristic
- altLabel
- current pulse; i_pulse
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrent | http://qudt.org/vocab/unit/MilliA
An electrical characteristic specifying the electric current associated with pulse.
Pulse Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PulseDuration- Type
- Class, Characteristic
- altLabel
- pulse time; t_pulse
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the duration of pulse.
Pulse Power Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PulsePowerDensity- Type
- Class, Characteristic
- altLabel
- Ppulse; pulse power
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PowerDensity
The average electrical power delivered during a specified discharge pulse divided by an explicitly stated normalization area, volume or mass, with average pulse power equal to the energy delivered during the pulse divided by its duration.
Pulsed Laser Deposition Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PulsedLaserDepositionProcess- Type
- Class, Manufacturing
- altLabel
- PLD; pulsed laser deposition
Pulsed laser deposition of Fe–Co catalyst and Al2O3 support layers onto substrates.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001363 (pulsed laser deposition)
Purging Activation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PurgingActivation- Type
- Class, Process
- altLabel
- purging method
A conditioning process that exposes or purges an electrode assembly with specified gases to establish an atmosphere or material state required for activation.
Purification Repetitions
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PurificationRepetitions- Type
- Class, Characteristic
- altLabel
- isolated by centrifugation (repeated 3 times); multiple purifications; repeated 3 times
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying purification repetitions under the conditions and reference basis stated with the record.
Pycnometry Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PycnometryMeasurement- Type
- Class, Measurement
- altLabel
- gas pycnometer density measurement; helium pycnometer
A helium gas-displacement measurement that determines specimen skeletal volume and calculates skeletal density from specimen mass and the measured skeletal volume.
Pyrex Glass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PyrexGlass- Type
- Class, Matter
A material entity corresponding to a pyrex glass and used as an input in Membrane Immobilization On Pyrex Glass.
Pyridinic Nitrogen Fraction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PyridinicNitrogenFractionPercent- Type
- Class, Characteristic
- altLabel
- pyridinic N
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting percent of N 1s assigned to pyridinic nitrogen (XPS deconvolution).
Pyrolysis Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PyrolysisProcess- Type
- Class, Manufacturing
- altLabel
- pyrolysis under N2; pyrolysis under nitrogen; pyrolyzed
High-temperature heat treatment of CoTMPP precursor/silica composite under nitrogen to form the active non-Pt catalyst.
Pyrolysis Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PyrolysisTemperature- Type
- Class, Characteristic
- altLabel
- calcination temperature; heat treatment temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with pyrolysis.
Pyrolysis Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PyrolysisTime- Type
- Class, Characteristic
- altLabel
- calcination time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with pyrolysis.
Pyrrolic Nitrogen Fraction Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#PyrrolicNitrogenFractionPercent- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting percent of N 1s assigned to pyrrolic nitrogen (XPS deconvolution).
QD Ink Formulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QDInkFormulation- Type
- Class, Manufacturing
- altLabel
- QD ink; ink formulation; photosensitive QD inks
Preparation of SU-8/MSA-QD inks with specified mass fractions and mixed solvents.
QD Ink Solvent Weight Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QDInkSolventWeightRatio- Type
- Class, Characteristic
- altLabel
- HXA:MEK; co-solvent ratio; solvent ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A dimensionless characteristic expressing the stated ratio identified as QD Ink Solvent Weight Ratio.
QD Powder Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QDPowderMass- Type
- Class, Characteristic
- altLabel
- QD powder (mg)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of qd powder.
QSDFT Surface Area Nitrogen
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QSDFTSurfaceAreaNitrogen- Type
- Class, Characteristic
- altLabel
- DFT surface area; QSDFT area; QSDFT surface area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerMass
A property denoting qSDFT-derived (quenched solid density functional theory) surface area from N2 physisorption.
Quantitative characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuantitativeCharacteristic- Type
- Class, Characteristic
A property whose value can be expressed using a number, quantity kind, unit, range, distribution, or mathematical object.
- subclasses
- AC Input Amplitude, Accelerating Voltage, Acid Doping Level, Acid Value, Assembly Torque, Boiling Point, Cantilever Spring Constant, Carbon Black Primary Particles Per Aggregate, Carbon Mass, Carbon Nanotube Forest Height, Carrier Gas Flow, Catalyst Mass, Catalyst Transfer Rate, Centrifugal Acceleration, Centrifugation Speed, Coating Air Velocity, Coating Gap, Coating Speed, Cobalt Thiolate Mass, Component Mass, Composition characteristic, Compression Percent, Cooling Rate, Count characteristic, CPE Admittance Y 0, CPE Exponent N, Crack Connectivity, Crawler Speed, Crosshead Speed, CV Scan Rate Cleaning, CV Scan Rate Measurement, Density characteristic, Detection Limit, Dielectric Constant, Dilution Factor, Dimensional Expansion Percent, Dip Coating Withdrawal Rate, Duty Cycle, ECSA Loss Percent, Electrical characteristic, Electrical Resistivity, Electrolyte PH, Electron Current, Electrospinning Applied Voltage, Electrospinning Collector Voltage, Electrospinning Needle Gauge, Elongation At Break, Energy characteristic, Ethanol Mass In Ink, Ethyl Acetate Mass In Ink, Faraday Constant, Feed Rate, Filament Deflection, Fill Factor, Flow Channel Height, Frame Rate, Frequency characteristic, Furfuryl Alcohol Selectivity, Geometric characteristic, Gloss, Graphene Layer Step Height, Guinier Porod Dimension Variable, Hall Mobility, Hamaker Constant, Hansen Solubility Parameter Dispersion, Hansen Solubility Parameter Hydrogen Bonding, Hansen Solubility Parameter Polar, Heating Rate, Hg Hg O To RHE Offset, Homogenization Speed, Hot Press Force, Hydrogen Purity, Hydrogen Uptake Per Furfural, Image Height Pixels, Inductance L, Ink Mixing Speed, Inkjet Printing Spatial Resolution, Iodine Value, Ionomer Adsorption Rate On Pt Carbon, Ionomer Equivalent Weight, Ionomer Nanoparticle Height, Ketonic Resin Mass, Knudsen Number, Langmuir Adsorption Constant, Laser Fluence, Laser Repetition Rate, Laser Z Step, Lattice Height, Lattice Parameter, Limiting ionomer alignment degree, Linear Shrinkage, Linear Shrinkage Height, Magnetic-field characteristic, Magnification, Manufacturing Throughput Increase Factor, Mass Fractal Dimension, Mass-to-charge characteristic, MEA Assembly Gap, Measurement Gap, Metal Mass Per Oil Mass, Methanol Excess Percent, Molecular-mass characteristic, Nafion Backbone Solubility Parameter, Nafion Side Chain Solubility Parameter, Nickel Thiolate Mass, Nitrocellulose Varnish Mass, Normalized Resistance, Operating characteristic, Overpotential, Oxygen Solubility Factor Vs Nafion, p H, Peak To Peak Separation, Phosphoric Acid Saturation In Cracks, Pigment Cyan 153 Mass, Pillar Height, Piston Displacement A 1, Piston Displacement A 2, Plasticizer ATBC Mass, Polymer Mass Loss, Polymer P Ka, Polymeric Dispersant Mass, Positioning Accuracy, Pressure characteristic, Print Resolution, Print Speed, Printability Z Number, Printed CNT Structure Height, Printing withdrawal speed, Profilometer Sampling Step, Profilometer Stylus Force, Profilometer Stylus Speed, Projector Light Intensity, Protonic Catalyst Layer Resistivity, Pseudo First Order Rate Constant, Pt Mass, Pt Utilization, QD Powder Mass, Ramp Rate, Raster Pitch, Reinfiltration Mass Increase, Relative Humidity, Relative Humidity AST, Relative Humidity Operation, Relative Variation Percent, Relative Volatilization Rate, Retraction Rate, Ri Over Cd Sqrt, Rolling Speed, Root Mean Square Error, Rotation Rate, Sample Mass, Saturated Residual Water Amount, Scaling Exponent A, Scaling Exponent B, Scan Rate, Screen Mesh Count, Screen Ruling, Screen Tension, Semi Empirical Parameter A, Shear Rate, Shear Rate Sweep Max, Shear Rate Sweep Min, Solubility Parameter Total, Sonication Amplitude Percent, Spatial Resolution, Specific Layer Weight, Spin Coating Speed, Spray Speed, Sputter Coating Current, Square Wave Amplitude, Stability Ratio, Stage Tilt, Statistical characteristic, Stirring Speed, Surface Basicity Change Delta P Hf, Surface tension, TEM Defocus, Temporal characteristic, Tetrahydrofurfural Selectivity, Tetrahydrofurfuryl Alcohol Selectivity, Total Ink Formulation Mass, UV Bandwidth, UV Irradiance, UV Scan Speed, Volumetric ink deposition rate, Warburg Coefficient, Web Tension, Weight Increase After Impregnation, XRD Two Theta End, XRD Two Theta Start
Quantum Dot
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuantumDot- Type
- Class, Matter
- altLabel
- QD; colloidal quantum dot
A nanoscale material structure in which charge carriers are confined in all three spatial dimensions, resulting in discrete, size-dependent electronic states.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_50853 (quantum dot)
Quantum Dot Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuantumDotInk- Type
- Class, Matter
- altLabel
- QD ink; SU-8/MSA-QD ink; resin-based QD inks
Ink formulation containing MSA-QDs, SU-8 binder, and mixed solvents; used for inkjet printing and droplet drying tests.
Quantum Dot Loading Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuantumDotLoadingWeightPercent- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting quantum dot loading weight percent.
Quantum Dot Photoresist
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuantumDotPhotoresist- Type
- Class, Matter
- altLabel
- QD photoresist; QD photoresist (SU-8/MSA-QD composite); QD photoresists
Photosensitive composite used for photolithographic patterning (e.g., 2 wt% QDs + 10 wt% SU-8 + PAG + solvent mix).
Quantum Dot Weight Percent In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuantumDotWeightPercentInInk- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as Quantum Dot Weight Percent In Ink.
Quartz Capillary
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuartzCapillary- Type
- Class, Matter
0.5 mm quartz capillary used to contain specimens during XRD/tomography.
Quartz Crystal Microbalance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuartzCrystalMicrobalance- Type
- Class, Instrument
- altLabel
- METTLER TOLEDO quartz crystal microbalance; QCM
An instrument corresponding to a quartz crystal microbalance and used in Catalyst Loading Determination and Quartz Crystal Microbalance Measurement.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001077 (quartz crystal microbalance)
Quartz Crystal Microbalance Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuartzCrystalMicrobalanceMeasurement- Type
- Class, Measurement
- altLabel
- QCM; quartz crystal microbalance
Quartz-crystal microbalance measurement used to quantify sulfuric acid mass uptake in thin films.
Mappings
- skos:exactMatch
http://www.bioassayontology.org/bao#BAO_0000456 (quartz crystal microbalance)
Quaternary Ammonium Silica Precursor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuaternaryAmmoniumSilicaPrecursor- Type
- Class, Matter
- altLabel
- QASP
Quaternary ammonium silica precursor synthesized from GTMAC and APTMS, used as ionic source/plasticizer in PVA matrix.
Quaternized Silica Filler
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuaternizedSilicaFiller- Type
- Class, Matter
- altLabel
- quaternized-SiO2 fillers
Quaternized silica filler added to PVA/QASP membrane (10 wt% vs PVA) to reduce methanol permeability and improve properties.
Quokka SANS Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#QuokkaSANSInstrument- Type
- Class, Instrument
- altLabel
- Quokka SANS instrument (ANSTO)
An instrument corresponding to a quokka SANS instrument and used in Contrast Variation SANSUSANS Measurement.
Radiometer Photometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RadiometerPhotometer- Type
- Class, Instrument
- altLabel
- ILT1400-A Radiometer Photometer
Instrument used to measure projector light intensity.
Radius Of Gyration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RadiusOfGyration- Type
- Class, Characteristic
- altLabel
- Rg
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting radius of gyration (Rg) of ink aggregates/agglomerates extracted from Guinier fits to USAXS data.
Raman D Band Peak Wavenumber
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RamanDBandPeakWavenumber- Type
- Class, Characteristic
- altLabel
- D band peak position; D-band peak; Raman D band
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Wavenumber
A property denoting raman D-band peak position (wavenumber) for carbon disorder band.
Raman D Band Wavenumber
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RamanDBandWavenumber- Type
- Class, Characteristic
- altLabel
- Raman D-band peak position
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ReciprocalCentimeter
A property denoting Raman wavenumber (cm^-1) of the carbon D-band peak in dried ink films.
Raman G Band Peak Wavenumber
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RamanGBandPeakWavenumber- Type
- Class, Characteristic
- altLabel
- G band peak position; G-band peak; Raman G band
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Wavenumber
A property denoting raman G-band peak position (wavenumber) used to assess carbon structural changes.
Raman G Band Wavenumber
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RamanGBandWavenumber- Type
- Class, Characteristic
- altLabel
- Raman G-band peak position; Raman shift for carbon G-band
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ReciprocalCentimeter
A property denoting Raman wavenumber (cm^-1) of the carbon G-band peak in dried ink films.
Raman I 2 D To IG Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RamanI2DToIGRatio- Type
- Class, Characteristic
- altLabel
- I2D/IG
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting intensity ratio of Raman 2D band to G band used to indicate graphene stacking/restacking.
Raman ID To IG Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RamanIDToIGRatio- Type
- Class, Characteristic
- altLabel
- D/G band intensity ratio; ID/IG; R = ID/IG
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting Raman D-band to G-band intensity ratio (ID/IG) for carbon structure.
Raman IG To ID Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RamanIGToIDRatio- Type
- Class, Characteristic
- altLabel
- I_G/I_D; I_G/I_D ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A property denoting raman IG to ID ratio and determined in Raman Spectroscopy Measurement.
Raman Spectrometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RamanSpectrometer- Type
- Class, Instrument
- altLabel
- Nicolet Almega XR Raman; Raman spectroscope (LabRAM HR; Renishaw inVia Qontor confocal Raman microscope
An instrument corresponding to a Raman spectrometer and used in Raman spectroscopy measurement.
Mappings
- skos:broadMatch
https://w3id.org/polymat/Spectrometer (Spectrometer) - skos:exactMatch
http://purl.allotrope.org/ontologies/equipment#AFE_0000551 (Raman spectrometer) - skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001235 (Raman spectrometer)
Raman spectroscopy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RamanSpectroscopyMeasurement- Type
- Class, Measurement
- altLabel
- RAMAN; Raman Spectroscopy Measurement; Raman spectra; Raman spectroscopy
A measurement process that uses Raman spectroscopy to determine Raman band positions and intensity ratios using a Raman spectrometer.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/process#AFP_0000047 (Raman spectroscopy) - skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0000656 (Raman spectroscopy) - skos:exactMatch
https://w3id.org/emmo/domain/characterisation-methodology/chameo#RamanSpectroscopy (RamanSpectroscopy) - skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000069 (Raman spectroscopy)
Ramp Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RampRate- Type
- Class, Characteristic
- altLabel
- ramp-up rate; °C/min
- QUDT guidance
- http://qudt.org/vocab/quantitykind/HeatingRate
The rate of change of the heat-treatment temperature with elapsed time during a specified temperature-program segment.
Rapid Cool Down Activation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RapidCoolDownActivation- Type
- Class, Process
- altLabel
- condensation activation; rapid cool-down
A conditioning process that rapidly cools a fuel-cell assembly below a specified local water dew point to induce condensation and promote hydration or activation.
Raster Pitch
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RasterPitch- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying raster pitch under the conditions and reference basis stated with the record.
RDE Rotator
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RDERotator- Type
- Class, Instrument
An instrument corresponding to a rotating disk electrode rotator and used in linear sweep voltammetry and related rotating-electrode measurements.
Reaction Area Position In Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReactionAreaPositionInCatalystLayer- Type
- Class, Characteristic
- altLabel
- reaction area moves from PEM to GDL; reaction area position
A geometric characteristic specifying reaction area position in catalyst layer under the conditions and reference basis stated with the record.
Reaction instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReactionInstrument- Type
- Class, Instrument
A manufacturing instrument that provides a controlled vessel or environment for synthesis, reaction, or hydrothermal treatment.
Reaction Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReactionLayer- Type
- Class, Matter
- altLabel
- active layer; layer Y
Pt-containing sublayer (layer Y) where ORR occurs, sandwiched between X and Z
Mappings
- skos:broadMatch
http://purl.obolibrary.org/obo/ENVO_01000281 (layer)
Reaction Layer Thickness Fraction In MCL
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReactionLayerThicknessFractionInMCL- Type
- Class, Characteristic
- altLabel
- proportion in MCL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
The through-plane thickness of the designated reaction sublayer divided by the total through-plane thickness of the cathode multilayer catalyst layer.
Reaction Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReactionTemperature- Type
- Class, Characteristic
- altLabel
- T; synthesis temperature; treatment temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with reaction.
Mappings
- skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0007013 (reaction temperature)
Reaction Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReactionTime- Type
- Class, Characteristic
- altLabel
- hold time; treatment time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Duration | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with reaction.
Reactor device
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReactorDevice- Type
- Class, Matter
A device that provides a controlled volume and operating environment for a chemical, catalytic, or electrochemical reaction.
- subclassOf / subPropertyOf
- Device
Reactor Tube Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReactorTubeDiameter- Type
- Class, Characteristic
- altLabel
- quartz tube diameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the diameter of reactor tube.
Recurrent Neural Network Model
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RecurrentNeuralNetworkModel- Type
- Class, ModelArtifact
- altLabel
- RNN; recurrent neural network
A neural-network model with recurrent state updates that allow information from earlier sequence positions to influence subsequent states or outputs.
Reduction Completion Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReductionCompletionTemperature- Type
- Class, Characteristic
- altLabel
- complete reduction temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermodynamicTemperature | http://qudt.org/vocab/unit/K
A property denoting temperature at which a specific oxide is no longer detected / reduction completes.
Reduction Onset Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReductionOnsetTemperature- Type
- Class, Characteristic
- altLabel
- onset temperature; reduction start temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermodynamicTemperature | http://qudt.org/vocab/unit/K
The temperature at which reduction of a specified reducible species first satisfies the stated detection criterion during a defined atmosphere and heating protocol.
Reduction Peak Current
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReductionPeakCurrent- Type
- Class, Characteristic
- altLabel
- ORR reduction current; peak cathodic current; reduction current
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrent | http://qudt.org/vocab/unit/A
A property denoting cathodic peak current associated with oxygen reduction in CV (O2-saturated electrolyte).
Reduction Peak Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReductionPeakPotential- Type
- Class, Characteristic
- altLabel
- CICo; ORR peak potential; ORR reduction peak potential
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
A property denoting electrode potential at ORR reduction peak in CV (reported vs Ag/AgCl).
Reduction Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReductionPotential- Type
- Class, Characteristic
- altLabel
- AQS reduction potential; E°; formal potential
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
A property denoting average redox reduction potential estimated from CV peak positions; reported vs SHE for AQS and BQDS.
Reference Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReferenceConcentration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountConcentration
The concentration assigned to an identified chemical species in a specified phase at the reference state of a defined kinetic or transport model.
Reference Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReferenceCurrentDensity- Type
- Class, Characteristic
- altLabel
- RCD; reference current prefactor; reference exchange density
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumetricCurrentDensity
A density characteristic specifying the stated amount of reference current per unit reference volume or area.
Reference electrode
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReferenceElectrode- Type
- Class, Instrument
An electrode that provides a stable reference potential for an electrochemical measurement.
Reference Electrode Calibration Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReferenceElectrodeCalibrationMeasurement- Type
- Class, Measurement
- altLabel
- Reference electrode potential against RHE was measured
Measurement of reference electrode potential offset (Ag/AgCl vs RHE) in the electrolyte batch before experiments.
Reference Electrode Mercurous Sulfate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReferenceElectrodeMercurousSulfate- Type
- Class, Instrument
- altLabel
- mercurous sulfate electrode
A reference electrode based on the mercury/mercurous-sulfate (Hg/Hg₂SO₄) redox couple in a sulfate-containing electrolyte, with electrode potential specified for electrolyte composition and temperature.
Reference Electrode Mercury Mercury Oxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReferenceElectrodeMercuryMercuryOxide- Type
- Class, Instrument
A reference electrode based on the mercury/mercury(II)-oxide (Hg/HgO) redox couple in an alkaline electrolyte, with electrode potential specified for electrolyte composition and temperature.
Reference scale
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReferenceScale- Type
- Class, Specification
A specification defining the reference against which a reported potential or related quantity is expressed.
Refractive Index
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RefractiveIndex- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/RefractiveIndex
A property denoting refractive index of dispersion medium (used in DLS/optical parameters and Hamaker constant calculation).
Reinfiltration Mass Increase
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReinfiltrationMassIncrease- Type
- Class, Characteristic
- altLabel
- mass increase after reinfiltration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting percent mass increase after one polymer reinfiltration cycle (PIP trial).
Relative Current Density Change
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeCurrentDensityChange- Type
- Class, Characteristic
- altLabel
- current density decrease; current density decreases; current density yield
- QUDT guidance
- http://qudt.org/vocab/quantitykind/RelativeChange | http://qudt.org/vocab/unit/PERCENT
A property denoting relative current density change.
Relative Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeDensity- Type
- Class, Characteristic
- altLabel
- near-full density
A property denoting density expressed relative to theoretical full density; often inferred from porosity.
Relative Humidity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeHumidity- Type
- Class, Characteristic
- altLabel
- RH; Relative humidity A/C; humidification
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A quantitative characteristic specifying relative humidity under the conditions and reference basis stated with the record.
Mappings
- skos:broadMatch
http://astrothesaurus.org/uat/764 (Humidity) - skos:exactMatch
http://purl.allotrope.org/ontologies/result#AFR_0002614 (relative humidity)
Relative Humidity AST
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeHumidityAST- Type
- Class, Characteristic
- altLabel
- RH_AST; relative humidity during voltage cycling
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A quantitative characteristic specifying relative humidity ast under the conditions and reference basis stated with the record.
Relative Humidity Operation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeHumidityOperation- Type
- Class, Characteristic
- altLabel
- RH; RH during operation; RH_OP
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
http://qudt.org/vocab/quantitykind/RelativeHumidity | http://qudt.org/vocab/unit/PERCENT
A dimensionless characteristic expressing the stated ratio identified as Relative Humidity Operation.
Relative Increase In Peak Power Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeIncreaseInPeakPowerDensity- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/RelativeChange | http://qudt.org/vocab/unit/PERCENT
A property denoting relative change in peak power density between MIP-modified and control anodes.
Relative Oxygen Permeability
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeOxygenPermeability- Type
- Class, Characteristic
- altLabel
- O2 permeability ratio vs bulk; thin-film permeability ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
A property denoting dimensionless ratio of oxygen permeability of thin PFSA ionomer film (at interface) relative to bulk PFSA membrane.
Relative Performance Variation Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativePerformanceVariationPercent- Type
- Class, Compatibility
- altLabel
- performance variation; relative performance variation
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A property denoting relative performance variation percent and determined in Fuel Cell Polarization Measurement.
Relative Proton Conductivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeProtonConductivity- Type
- Class, Characteristic
- altLabel
- σ_H+^R
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting dimensionless relative proton conductivity defined as σ_eff / σ_bulk for the ionomer phase/network in the catalyst layer.
Relative Proton Conductivity Coefficient Low RIC
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeProtonConductivityCoefficientLowRIC- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A transport characteristic that represents relative proton conductivity coefficient low ric for a material, component, process, measurement, or hydrogen-electrochemical system.
Relative Proton Conductivity Exponent RIC High
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeProtonConductivityExponentRICHigh- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A transport characteristic that represents relative proton conductivity exponent ric high for a material, component, process, measurement, or hydrogen-electrochemical system.
Relative Proton Conductivity Exponent RIC Low
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeProtonConductivityExponentRICLow- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A transport characteristic that represents relative proton conductivity exponent ric low for a material, component, process, measurement, or hydrogen-electrochemical system.
Relative Proton Conductivity Exponent VCB
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeProtonConductivityExponentVCB- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A transport characteristic that represents relative proton conductivity exponent vcb for a material, component, process, measurement, or hydrogen-electrochemical system.
Relative Proton Conductivity Threshold RIC
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeProtonConductivityThresholdRIC- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A transport characteristic that represents relative proton conductivity threshold ric for a material, component, process, measurement, or hydrogen-electrochemical system.
Relative Variation Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeVariationPercent- Type
- Class, Characteristic
- altLabel
- Variation (%); maximum percentage variation
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting ratio (Mmax−Mmin)/Mavg ×100% for repeated dispensing mass.
Relative Volatilization Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelativeVolatilizationRate- Type
- Class, Characteristic
- altLabel
- volatilization rate (relative)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatio
The volatilization rate of a specified liquid divided by that of an identified reference liquid measured under the same protocol and environmental conditions.
Relevance Vector Machine Model
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RelevanceVectorMachineModel- Type
- Class, ModelArtifact
- altLabel
- RVM; relevance vector machine
A sparse Bayesian model for regression or classification that uses a weighted basis-function expansion and probabilistic weight priors to promote a sparse predictive representation.
Removed Strip Width
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RemovedStripWidth- Type
- Class, Characteristic
- altLabel
- removed strips width; strip width
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the width of removed strip.
Reported Material Property
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ReportedMaterialProperty- Type
- Class, DataPoint
- altLabel
- reported property; reported property value (from literature)
A data point that records a material-property value reported by a source together with the material identity, applicable conditions, and provenance.
Residual Chloride Content
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ResidualChlorideContent- Type
- Class, Characteristic
- altLabel
- Cl- content; residual Cl- content
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting residual chloride content remaining after etching, estimated from XPS.
Residual Iron Content
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ResidualIronContent- Type
- Class, Characteristic
- altLabel
- Fe3+ content; residual Fe3+ content
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting residual Fe content remaining after etching, estimated from XPS.
Residual Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ResidualRate- Type
- Class, Compatibility
- altLabel
- residual analysis
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Percent | http://qudt.org/vocab/unit/PERCENT
A quantitative characteristic that represents residual rate for a material, component, process, measurement, or hydrogen-electrochemical system.
Rest Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RestTime- Type
- Class, Characteristic
- altLabel
- self-recharge rest
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with rest.
Retraction Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RetractionRate- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Speed
A quantitative characteristic specifying the change in retraction per stated unit of time or progression variable.
Rheological characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RheologicalCharacteristic- Type
- Class, Characteristic
A mechanical characteristic describing the deformation or flow response of a material under an applied stress or strain.
Rheological measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RheologicalMeasurement- Type
- Class, Measurement
A characterization measurement that determines flow, deformation, viscosity, viscoelasticity, or thixotropic behavior of a material.
Rheological Percolation Threshold Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RheologicalPercolationThresholdVolumeFraction- Type
- Class, Characteristic
- altLabel
- critical volume fraction (r; φ_r
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
The volume fraction of the specified dispersed-solid phase at which a connected structure first satisfies the stated rheological percolation criterion.
Rheology Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RheologyDataset- Type
- Class, Data
- altLabel
- rheology data; rheology results
Dataset of dynamic rheology and curing-time photorheology measurements (frequency sweeps and modulus evolution).
Rheology Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RheologyMeasurement- Type
- Class, Measurement
- altLabel
- rheological tests; steady-shear rheological measurement; viscosity measurement
Measurement of viscosity/rheology versus shear rate for catalyst inks or ionomer dispersions.
Rheology Measurement 2
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RheologyMeasurement2- Type
- Class, Measurement
- altLabel
- secondary rheology run
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DynamicViscosity
A rheology measurement process used to determine viscosity under a defined shear-rate sweep and instrument configuration.
Rheometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Rheometer- Type
- Class, Instrument
- altLabel
- rotational rheometer; stress-controlled rheometer; stress-controlled rotational rheometer
Instrument for measuring ink or solution rheology/viscosity versus shear rate.
Rhodamine B
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RhodamineB- Type
- Class, Matter
Organic dye pollutant used as model compound for photocatalytic degradation tests.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_52334 (rhodamine B)
Ri Over Cd Sqrt
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RiOverCdSqrt- Type
- Class, Characteristic
- altLabel
- (Ri/Cd)^(1/2) slope; (Ri/Cd)^−1/2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ImpedanceSlope
A slope-derived electrochemical characteristic obtained from the linear dependence of impedance magnitude on inverse square-root angular frequency and used with double-layer capacitance to estimate ionic resistance.
Ricinoleic Acid Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RicinoleicAcidMassFraction- Type
- Class, Characteristic
- altLabel
- Ricinoleic fatty acid%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting ricinoleic acid mass fraction and determined in Gas Chromatography Measurement.
Ring Collection Efficiency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RingCollectionEfficiency- Type
- Class, Characteristic
- altLabel
- N; collection efficiency; collection efficiency N
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A performance characteristic quantifying ring collection efficiency under the conditions and reference basis stated with the record.
Ring Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RingPotential- Type
- Class, Characteristic
- altLabel
- ring electrode potential
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
An electrical characteristic specifying the electric or electrochemical potential associated with ring.
RM 257
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RM257- Type
- Class, Matter
- altLabel
- RM257 diacrylate mesogen
Diacrylate mesogen component of LCE ink.
Roll Press Machine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RollPressMachine- Type
- Class, Instrument
- altLabel
- roll-press
Hot-press apparatus with rotating cylindrical rollers and controlled rolling speed/roller temperature.
Roll To Roll Production
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RollToRollProduction- Type
- Class, Manufacturing
- altLabel
- roll-to-roll
A manufacturing process that transports a continuous flexible web between rolls through coating, printing, drying, or other fabrication operations.
Rolling Machine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RollingMachine- Type
- Class, Instrument
- altLabel
- homemade rolling machine; rolling homogenization
Roller/rolling device used for long-duration homogenization of suspensions.
Rolling Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RollingSpeed- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Speed
A rate characteristic specifying the speed associated with rolling.
Root Mean Square Error
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RootMeanSquareError- Type
- Class, Characteristic
- altLabel
- RMSE
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
A property denoting prediction performance metric: root mean square error between measured and predicted voltage.
Rotating Disk Electrode System
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RotatingDiskElectrodeSystem- Type
- Class, Instrument
- altLabel
- Pine Research rotating system; RDE; rotating disk electrode system (Pine Research)
RDE system used for ORR testing (RDE; ontology contains RRDE terms but paper uses RDE).
Rotating Ring Disk Voltammetry
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RotatingRingDiskVoltammetry- Type
- Class, Measurement
- altLabel
- rotating disk electrode; rotating ring disk electrode; rotating ring disk electrode measurements
A measurement process that uses rotating ring disk voltammetry to determine Current Density, Kinetic Current, and Electron Transfer Number using Electrochemical Workstation, RRDEAssembly, and Glassy Carbon Disk Electrode and generating Experiment Dataset and Limiting Current Dataset.
Rotation Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RotationRate- Type
- Class, Characteristic
- altLabel
- rotating speed; rotation speed; rotation speed (rpm)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency | http://qudt.org/vocab/unit/REV-PER-MIN
A quantitative characteristic specifying the change in rotation per stated unit of time or progression variable.
Rotor Stator Homogenizer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RotorStatorHomogenizer- Type
- Class, Instrument
- altLabel
- ULTRA-TURAX homogenizer
High-shear rotor–stator homogenizer used for ink mixing at 15,000 rpm.
Roughness Factor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RoughnessFactor- Type
- Class, Compatibility
- altLabel
- Apt; inverse roughness factor; rf
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting roughness factor and determined in Cyclic Voltammetry and Optical Microscopy Imaging Measurement.
RRDE Assembly
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RRDEAssembly- Type
- Class, Instrument
An instrument corresponding to a rotating ring-disk electrode assembly and used in rotating ring-disk voltammetry and related electrochemical measurements.
Ru Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#RuAtomicPercent- Type
- Class, Characteristic
- altLabel
- EDX; Ru [atom%]; STEM-EDX
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AtomicPercent
A property denoting atomic percent of Ru in Pt/Ru catalyst particles or networks (from EDX).
s PPB
- IRI
https://w3id.org/h2kg/hydrogen-ontology#sPPB- Type
- Class, Matter
Biphenyl-linked sulfonated phenylated polyphenylene, a hydrocarbon proton-exchange ionomer.
Sacrificial Support Method
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SacrificialSupportMethod- Type
- Class, Manufacturing
- altLabel
- SSM
Catalyst synthesis route using silica template, AAPyr precursor and metal salts followed by pyrolysis and template removal.
Sample Detector Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SampleDetectorDistance- Type
- Class, Characteristic
- altLabel
- sample-to-detector distance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/MilliM
A geometric characteristic specifying sample detector distance under the conditions and reference basis stated with the record.
Sample Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SampleMass- Type
- Class, Characteristic
- altLabel
- coating mass; deposited mass; sample weight
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of sample.
Saturated Ionomer Water Content Lambda
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SaturatedIonomerWaterContentLambda- Type
- Class, Characteristic
- altLabel
- saturated ionomer water content; λ_sat
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
The number of moles of water per mole of ion-exchange sites in an ionomer at the specified water-saturation equilibrium and temperature.
Saturated Residual Water Amount
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SaturatedResidualWaterAmount- Type
- Class, Characteristic
- altLabel
- saturated water amount; saturated water amount in GDL; water amount in membrane
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerArea
A property denoting estimated residual liquid water per area used for subzero storage (dominant contribution from GDL).
Sawdust
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Sawdust- Type
- Class, Matter
- altLabel
- sawdust (Betula platyphylla)
Representative lignocellulosic biowaste precursor used for most quantitative characterization.
Sawdust Derived Biochar
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SawdustDerivedBiochar- Type
- Class, Matter
- altLabel
- SDB
Control material made using same protocol without Fe catalysis (biochar).
Scaling Exponent A
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScalingExponentA- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
The exponent A describing the dependence of plateau storage modulus G0-prime on dispersed-phase volume fraction phi through the scaling relation G0-prime proportional to phi raised to A in the specified rheological regime.
Scaling Exponent B
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScalingExponentB- Type
- Class, Characteristic
- altLabel
- B
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
The exponent B describing the dependence of the source-defined characteristic strain gamma0 on dispersed-phase volume fraction phi through the scaling relation gamma0 proportional to phi raised to B.
Scaling Exponent T
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScalingExponentT- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A quantitative characteristic that represents scaling exponent t for a material, component, process, measurement, or hydrogen-electrochemical system.
Scan Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScanRate- Type
- Class, Characteristic
- altLabel
- CV scan rate; scan rate (mV s−1); scanning rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency | http://qudt.org/vocab/unit/MilliV-PER-SEC
http://qudt.org/vocab/quantitykind/ElectricPotentialScanRate
A quantitative characteristic specifying the change in scan per stated unit of time or progression variable.
Scanning electron microscopy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScanningElectronMicroscopyImaging- Type
- Class, Measurement
- altLabel
- SEM; SEM images; SEM imaging; Scanning Electron Microscopy Imaging; scanning electron microscopy
A measurement process that uses scanning electron microscopy imaging to determine catalyst particle diameter, catalyst-layer morphology, catalyst-layer thickness, grain size, and carbon nanotube forest height using SEM Instrument and generating SEM Image Dataset, SEM Micrograph Dataset, and Microstructure Image Dataset.
Mappings
- skos:broadMatch
http://edamontology.org/topic_0611 (Electron microscopy) - skos:exactMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/sem_xxx_xxx-a7b1177950514f9c9de50af6b8252a9e-vp (SEM) - skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000075 (scanning electron microscopy)
Scattering Angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScatteringAngle- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle
A geometric characteristic specifying the angle associated with scattering.
Scattering measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScatteringMeasurement- Type
- Class, Measurement
A characterization measurement that analyzes radiation or particles scattered by a specimen.
SCE
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SCE- Type
- Class, Instrument
- altLabel
- saturated calomel electrode
An instrument corresponding to a saturated calomel electrode and used as a reference electrode in electrochemical measurements.
Scientific software
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScientificSoftware- Type
- Class, SoftwareArtifact
A software artifact used to acquire, process, analyze, simulate, or visualize scientific data.
Screen Mesh Characterization Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScreenMeshCharacterizationMeasurement- Type
- Class, Measurement
Characterization of screen mesh free volume (BCM/cm2) versus ruling.
Screen Mesh Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScreenMeshCount- Type
- Class, Characteristic
The number of mesh threads counted along a specified unit length of a printing screen in a stated mesh direction.
Screen Mesh Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScreenMeshThickness- Type
- Class, Characteristic
A geometric characteristic specifying the distance between the opposing bounding surfaces of screen mesh.
Screen Printing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScreenPrinting- Type
- Class, Manufacturing
- altLabel
- screen print; screen printing coating; sieve printing
Manufacturing step that deposits catalyst ink onto a substrate such as a membrane or gas diffusion layer to form a catalyst-layer intermediate.
Screen Printing Machine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScreenPrintingMachine- Type
- Class, Instrument
- altLabel
- Aurel 9000 screen-printer; E1 machine (EKRA)
Screen printing equipment used to print PICL inks onto GDL.
Screen Ruling
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScreenRuling- Type
- Class, Characteristic
- altLabel
- screen mesh ruling; screen ruling (lines/cm)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/LineDensity
A quantitative characteristic specifying screen ruling under the conditions and reference basis stated with the record.
Screen Tension
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScreenTension- Type
- Class, Characteristic
A quantitative characteristic specifying screen tension under the conditions and reference basis stated with the record.
Screen Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScreenVolume- Type
- Class, Characteristic
- altLabel
- free volume; screen volume (BCM/cm2)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumePerArea
The free volume of a printing-screen mesh available for ink transfer divided by the projected screen area to which that volume refers.
Screen Wire Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ScreenWireDiameter- Type
- Class, Characteristic
A geometric characteristic specifying the diameter of screen wire.
Sedimentation Test Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SedimentationTestMeasurement- Type
- Class, Measurement
- altLabel
- sedimentation test
A measurement process that uses sedimentation test measurement to determine Agglomerate Diameter.
Segment Active Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SegmentActiveArea- Type
- Class, Characteristic
- altLabel
- disc electrode area; segment area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
A geometric characteristic specifying the area associated with segment active.
Segment Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SegmentCount- Type
- Class, Characteristic
- altLabel
- number of segments; ten segments
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying the number of segment.
Segmented Cell System
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SegmentedCellSystem- Type
- Class, Instrument
- altLabel
- segmented cell setup; segmented fuel cell
10-segment cell hardware for spatially resolved impedance acquisition (Methods 2.1).
Selective Coaxial Ink 3 D Printing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SelectiveCoaxialInk3DPrinting- Type
- Class, Manufacturing
- altLabel
- coaxial extrusion printing; selective coaxial DIW
A manufacturing process for selective coaxial ink 3 D printing using Polydimethylsiloxane and Conductive Carbon Grease with Direct Ink Writing Printer, Pneumatic Dispenser, and Pressure Regulator and producing Smart Elastomeric Cellular Foam.
Selenium Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SeleniumPowder- Type
- Class, Matter
- altLabel
- Se powder; selenium precursor
A material entity corresponding to a selenium powder and used as an input in Ambient Pressure Chemical Vapor Deposition Synthesis.
SEM Image Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SEMImageDataset- Type
- Class, Data
- altLabel
- FIB-SEM images; SEM images; SEM surface images
A dataset containing SEM image data generated by Scanning Electron Microscopy Imaging, SEM Imaging, SEM Imaging Measurement, FIBSEM Tomography Measurement, and Energy Dispersive X Ray Spectroscopy.
SEM Imaging
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SEMImaging- Type
- Class, Measurement
- altLabel
- SEM
A measurement process that uses SEM imaging to confirm film or pattern thickness, morphology, pore-size features, and catalyst particle features using SEM Instrument and generating SEM Image Dataset, SEM Micrograph Dataset, and Microstructure Image Dataset.
SEM Imaging Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SEMImagingMeasurement- Type
- Class, Measurement
- altLabel
- FE-SEM imaging; SEM; SEM imaging
A measurement process that uses SEM imaging to compare catalyst-layer surface microstructure, thickness, morphology, and particle-size features using SEM Instrument and generating SEM Image Dataset, SEM Micrograph Dataset, and Microstructure Image Dataset.
SEM Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SEMInstrument- Type
- Class, Instrument
- altLabel
- FE-SEM Amber X; SEM; SU9000 SEM system
An electron microscope that scans a focused electron beam across a specimen and forms spatially resolved images from detected specimen-generated signals, commonly secondary or backscattered electrons.
SEM Micrograph Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SEMMicrographDataset- Type
- Class, Data
- altLabel
- SEM micrographs
A dataset containing SEM micrograph data generated by Scanning Electron Microscopy Imaging, SEM Imaging, and SEM Imaging Measurement.
Semi Empirical Parameter A
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SemiEmpiricalParameterA- Type
- Class, Characteristic
- altLabel
- parameter a
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Voltage | http://qudt.org/vocab/unit/V
A fitted voltage-intercept coefficient in the associated semi-empirical polarization model.
Sesbania Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SesbaniaPowder- Type
- Class, Matter
Organic extrusion aid added to slurry.
Set Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SetCurrentDensity- Type
- Class, Characteristic
- altLabel
- target current density
A density characteristic specifying the stated amount of set current per unit reference volume or area.
SHE
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SHE- Type
- Class, Instrument
- altLabel
- standard hydrogen electrode
An instrument corresponding to a standard hydrogen electrode and used as a reference electrode in electrochemical measurements.
Shear Mixing Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShearMixingProcess- Type
- Class, Manufacturing
- altLabel
- shear mixing
Solvent-free shear mixing in kitchen blender to exfoliate biomass and impregnate Fe species.
Shear Mixing Repetitions
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShearMixingRepetitions- Type
- Class, Characteristic
- altLabel
- repeated twenty times
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying shear mixing repetitions under the conditions and reference basis stated with the record.
Shear Mixing Rest Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShearMixingRestTime- Type
- Class, Characteristic
- altLabel
- rest time; rest/open time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with shear mixing rest.
Shear Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShearRate- Type
- Class, Characteristic
- altLabel
- s^-1; shear rate (s^-1)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ShearRate
A quantitative characteristic specifying the change in shear per stated unit of time or progression variable.
Shear Rate Sweep Max
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShearRateSweepMax- Type
- Class, Characteristic
- altLabel
- max shear rate; maximum shear rate; steady-rate sweep
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A quantitative characteristic specifying shear rate sweep max under the conditions and reference basis stated with the record.
Shear Rate Sweep Min
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShearRateSweepMin- Type
- Class, Characteristic
- altLabel
- min shear rate; minimum shear rate; steady-rate sweep
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A quantitative characteristic specifying shear rate sweep min under the conditions and reference basis stated with the record.
Shear Strain
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShearStrain- Type
- Class, Characteristic
- altLabel
- mm/mm; strain amplitude
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Strain | http://qudt.org/vocab/unit/PERCENT
A mechanical characteristic specifying shear strain under the conditions and reference basis stated with the record.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/quality#AFQ_0000214 (shear strain)
Shear Strain Sweep Max
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShearStrainSweepMax- Type
- Class, Characteristic
- altLabel
- dynamic strain sweep
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A mechanical characteristic specifying shear strain sweep max under the conditions and reference basis stated with the record.
Shear Strain Sweep Min
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShearStrainSweepMin- Type
- Class, Characteristic
- altLabel
- dynamic strain sweep
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A mechanical characteristic specifying shear strain sweep min under the conditions and reference basis stated with the record.
Shear Stress
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShearStress- Type
- Class, Characteristic
- altLabel
- mmHg
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A property denoting shear stress applied/measured in rheological tests (flow curve).
Sheet Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SheetResistance- Type
- Class, Characteristic
- altLabel
- electrical resistance (sheet); sq^-1; Ω/sq
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SheetResistance
A property denoting sheet resistance and determined in Four Probe Resistance Measurement, Reported Material Property, and Material Specification.
Short Circuit Current Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ShortCircuitCurrentDensity- Type
- Class, Characteristic
- altLabel
- Jsc
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity
A property denoting short-circuit current density of a solar cell under illumination.
Si C Fiber Volume Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SiCFiberVolumePercent- Type
- Class, Compatibility
- altLabel
- SiC fiber [vol %]
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
A geometric characteristic that represents si c fiber volume percent for a material, component, process, measurement, or hydrogen-electrochemical system.
Si O 2 Al 2 O 3 Molar Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SiO2Al2O3MolarRatio- Type
- Class, Characteristic
- altLabel
- SiO2/Al203; SiO2/Al2O3
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarRatio
A dimensionless characteristic expressing the stated ratio identified as Si O 2 Al 2 O 3 Molar Ratio.
Si OC Ceramic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SiOCCeramic- Type
- Class, Matter
Polymer-derived ceramic product after pyrolysis of printed and UV-cured structures.
Si OH Group Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SiOHGroupWeightPercent- Type
- Class, Compatibility
- altLabel
- Si-OH wt%; Si–OH groups; Si–OH groups (wt%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFractionPercent
A property denoting weight percent of Si–OH groups on silica nanosheets from XPS deconvolution.
Silane Condensation Functionalization
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SilaneCondensationFunctionalization- Type
- Class, Manufacturing
- altLabel
- silane condensation
Surface functionalization of SN via silane condensation and oxidation to sulfonic groups.
Silica Coated Pt On Carbon Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SilicaCoatedPtOnCarbonCatalyst- Type
- Class, Matter
- altLabel
- silica-coated Pt/C
A material entity corresponding to a silica coated pt on carbon catalyst and used as an input in Catalyst Ink Preparation.
Silica Coating Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SilicaCoatingProcess- Type
- Class, Manufacturing
- altLabel
- silica coating
A manufacturing process for silica coating process using Aminopropyltriethoxysilane, Ammonia, and Pt On Carbon Catalyst and producing Silica Coated Pt On Carbon Catalyst.
Silica Nanosheet
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SilicaNanosheet- Type
- Class, Matter
- altLabel
- SN; silica nanosheets
2D silica nanosheets derived from vermiculite via acid treatment.
Silica Template Etching
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SilicaTemplateEtching- Type
- Class, Manufacturing
- altLabel
- HF etching; etching of silica template; silica etching
Post-pyrolysis removal of silica template using hydrofluoric acid (HF).
Silica-based material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SilicaBasedMaterial- Type
- Class, Matter
An oxide material in which silica or a silicate is a principal functional constituent or structural phase.
Silicon Calibration Standard
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SiliconCalibrationStandard- Type
- Class, Matter
Calibration standard powder for diffraction setup.
Silicon Carbide Chopped Fiber
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SiliconCarbideChoppedFiber- Type
- Class, Matter
- altLabel
- SiC fiber; chopped SiC fiber (Tyranno SA3)
Chopped SiC fiber reinforcement added to DIW inks (≈5.77 or 10 vol%).
Silicon Dioxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SiliconDioxide- Type
- Class, Matter
- altLabel
- silica; silica layer
Silicon dioxide (SiO₂), an inorganic oxide material also called silica, occurring in crystalline or amorphous forms.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_30563 (silicon dioxide)
Silicon Dioxide Weight Percent In Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SiliconDioxideWeightPercentInCatalyst- Type
- Class, Characteristic
- altLabel
- SiO2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting silicon dioxide weight percent in catalyst.
Silicon Wafer Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SiliconWaferSubstrate- Type
- Class, Matter
- altLabel
- Si substrate; silicon substrate; silicon wafer
Silicon wafer substrate (highly n-doped Si (100)) used for catalyst patterning and CNT growth.
Silicone Caulk
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SiliconeCaulk- Type
- Class, Matter
- altLabel
- silicone caulk/gel
Silicone caulk/gel added to conductive ink to obtain paste/gel consistency.
Silver Foil
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SilverFoil- Type
- Class, Matter
- altLabel
- Ag foil
A material entity corresponding to a silver foil and used as an input in Ambient Pressure Chemical Vapor Deposition Synthesis.
Silver Nanoparticle Ink ME 603
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SilverNanoparticleInkME603- Type
- Class, Matter
Commercial silver nanoparticle ink product used as conductive ink.
Silver Nanowire
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SilverNanowire- Type
- Class, Matter
- altLabel
- silver nanowires
Conductive nanowire filler dispersed in ethanol, blended into PDL matrix to form percolated conductive network.
Simulation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Simulation- Type
- Class, Process
A process that executes a computational representation of a system to generate predicted state or behavior data.
Simulation dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SimulationDataset- Type
- Class, Data
A dataset generated or consumed by a simulation or model-execution process.
Mappings
- skos:exactMatch
https://nfdi.fiz-karlsruhe.de/ontology/NFDI_0001205 (simulation dataset)
Simulation Particle Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SimulationParticleCount- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying the number of simulation particle.
Simulation Time Step Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SimulationTimeStepCount- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
The number of numerical integration time steps executed in a simulation run.
Sintering Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SinteringProcess- Type
- Class, Manufacturing
- altLabel
- PTFE sintering; debinding and sintering; thermal sintering
Thermal treatment to remove organics (debinding) and densify printed ceramic parts at elevated temperature.
Sintering Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SinteringTemperature- Type
- Class, Characteristic
- altLabel
- final temperature; post-sintering temperature; thermally sintered
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with sintering.
Slice Number
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SliceNumber- Type
- Class, Characteristic
- altLabel
- number of slices
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying the number assigned to slice.
Sliding Window Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SlidingWindowSize- Type
- Class, Characteristic
- altLabel
- window size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
The number of consecutive past observations or time steps included in the input window of a specified sequence model.
Slot Die Coating
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SlotDieCoating- Type
- Class, Manufacturing
Roll-to-roll compatible coating method for depositing catalyst inks; discussed as scalable CL fabrication.
Smart Elastomeric Cellular Foam
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SmartElastomericCellularFoam- Type
- Class, Compatibility
- altLabel
- elastomeric foam; smart cellular foam
A material entity corresponding to a smart elastomeric cellular foam and used as an input in Compressive Strength Measurement, X Ray Computed Tomography Measurement, and Finite Element Analysis Simulation.
SMP 10 Volume Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SMP10VolumePercent- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
A geometric characteristic that represents smp 10 volume percent for a material, component, process, measurement, or hydrogen-electrochemical system.
Snap Off Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SnapOffDistance- Type
- Class, Characteristic
A geometric characteristic specifying snap off distance under the conditions and reference basis stated with the record.
SO 3 Stretch Wavenumber
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SO3StretchWavenumber- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ReciprocalCentimeter
A property denoting FTIR wavenumber (cm^-1) of Nafion sulfonate (-SO3-) asymmetric stretching peak.
Sodium Acetate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SodiumAcetate- Type
- Class, Matter
Sodium acetate added as organic fuel in MFC tests.
Sodium Carbonate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SodiumCarbonate- Type
- Class, Matter
Precipitating agent providing carbonate interlayer anions in LDH synthesis.
Sodium Chloride Electrolyte
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SodiumChlorideElectrolyte- Type
- Class, Matter
An ionically conducting electrolyte formulation containing sodium chloride.
Sodium Content Weight Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SodiumContentWeightPercent- Type
- Class, Characteristic
- altLabel
- Sodium content (wt.%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the mass percentage assigned to sodium content on the stated reference basis.
Sodium Dodecyl Benzene Sulfonate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SodiumDodecylBenzeneSulfonate- Type
- Class, Matter
- altLabel
- SDBS
A material entity corresponding to a sodium dodecyl benzene sulfonate and used as an input in Catalyst Ink Preparation.
Sodium Dodecyl Sulfate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SodiumDodecylSulfate- Type
- Class, Matter
- altLabel
- SDS
A material entity corresponding to a sodium dodecyl sulfate and used as an input in Catalyst Ink Preparation.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_8984 (sodium dodecyl sulfate)
Sodium Geopolymer Lattice
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SodiumGeopolymerLattice- Type
- Class, Matter
- altLabel
- Na-based geopolymer lattice
Sodium-based geopolymer lattice catalyst formulation (3D_Na_GP).
Sodium Hydroxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SodiumHydroxide- Type
- Class, Matter
Alkali hydroxide used in activating solution.
Sodium Lauryl Sulfonate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SodiumLaurylSulfonate- Type
- Class, Matter
- altLabel
- SLS
A material entity corresponding to a sodium lauryl sulfonate and used as an input in Catalyst Ink Preparation.
Sodium Silicate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SodiumSilicate- Type
- Class, Matter
Sodium silicate solution used in activating solution for Na-based geopolymer.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_60720 (sodium silicate)
Software agent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SoftwareAgent- Type
- Class, Agent
A software system that performs an activity with recorded responsibility or provenance.
- subclassOf / subPropertyOf
- Agent
Software artifact
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SoftwareArtifact- Type
- Class, SoftwareArtifact
An information entity comprising executable code, source code, configuration, or another software product.
Sol Gel Modification Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolGelModificationProcess- Type
- Class, Manufacturing
- altLabel
- sol-gel method; sol-gel reaction
Acid-catalyzed sol-gel reaction between MK resin (Si–OH) and hydrolyzed TMSPM to form Si–O–Si bonds and introduce methacrylate groups.
Solar Energy Fraction Infrared
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolarEnergyFractionInfrared- Type
- Class, Characteristic
- altLabel
- infrared wavelength region
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction of AM1.5G solar energy in infrared region as stated in review.
Solar Energy Fraction UV
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolarEnergyFractionUV- Type
- Class, Characteristic
- altLabel
- UV wavelength region
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction of AM1.5G solar energy in UV region as stated in review.
Solar Energy Fraction Visible
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolarEnergyFractionVisible- Type
- Class, Characteristic
- altLabel
- visible wavelength region
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction of AM1.5G solar energy in visible region as stated in review.
Solar Simulator IV Tester
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolarSimulatorIVTester- Type
- Class, Instrument
- altLabel
- IV tester; photovoltaic test station; solar simulator
Instrument/system for J-V performance testing.
Solartron 1260 Impedance Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Solartron1260ImpedanceAnalyzer- Type
- Class, Instrument
- altLabel
- Solartron 1260 Impedance/gain-phase Analyzer
Specific impedance analyzer used for EIS (potentiostatic).
Solid Content Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolidContentFraction- Type
- Class, Compatibility
- altLabel
- S.C.; solid content; solids content
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic that represents solid content fraction for a material, component, process, measurement, or hydrogen-electrochemical system.
Solid Content Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolidContentMeasurement- Type
- Class, Measurement
- altLabel
- solid content
A measurement process that uses solid content measurement to determine Solid Content Fraction.
Solid Loading Volume Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolidLoadingVolumeFraction- Type
- Class, Characteristic
- altLabel
- solid loading
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
The volume occupied by the specified solid constituents divided by the total volume of the wet ink formulation.
Solid State Ligand Exchange
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolidStateLigandExchange- Type
- Class, Manufacturing
Ligand exchange performed on solid CQD films (often layer-by-layer processing).
Solubility Parameter Total
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolubilityParameterTotal- Type
- Class, Characteristic
- altLabel
- Hansen solubility parameter (δ); delta_s; solubility parameter
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SolubilityParameter
http://qudt.org/vocab/quantitykind/SolubilityParameter
A cohesive-energy-density characteristic representing the total solubility parameter obtained from the combined dispersion, polar, and hydrogen-bonding contributions.
Solution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Solution- Type
- Class, Matter
A mixture in which one or more substances are dissolved at molecular or ionic scale in a continuous phase.
Solution Composition Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolutionCompositionMeasurement- Type
- Class, Measurement
- altLabel
- solution composition
A measurement process that uses solution composition measurement to determine Ionomer Mass Fraction, Water Mass Fraction In Solvent Mixture, and Alcohol Mass Fraction In Solvent Mixture.
Solution Conductivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolutionConductivity- Type
- Class, Characteristic
- altLabel
- SC; electrolyte conductivity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricalConductivity
A property denoting electrical conductivity of the MFC electrolyte/buffer solution.
Solution Method Ink Preparation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolutionMethodInkPreparation- Type
- Class, Manufacturing
- altLabel
- ink preparation; slurry preparation; solution method
Ink method where PBI remains dissolved in DMAc; compared against colloidal method.
Solution Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolutionVolume- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by solution.
Solvent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Solvent- Type
- Class, Matter
- altLabel
- dispersing solvent; organic solvent
A chemical substance used as the continuous liquid medium in which another substance is dissolved or dispersed.
Mappings
- skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0007246 (solvent)
Solvent Engineering
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventEngineering- Type
- Class, Manufacturing
Tuning solvent polarity/volatility/composition to improve ink stability and film quality.
Solvent Evaporation by Rotavapor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventEvaporationByRotavapor- Type
- Class, Manufacturing
- altLabel
- rotavapor evaporation; solvent evaporation
Removal of THF solvent from reaction mixture using rotary evaporation at elevated temperature.
Solvent Evaporation Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventEvaporationRate- Type
- Class, Compatibility
- altLabel
- evaporation rate; evaporation rate of solvent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFractionRate
A quantitative characteristic that represents solvent evaporation rate for a material, component, process, measurement, or hydrogen-electrochemical system.
Solvent Evaporation Thickening
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventEvaporationThickening- Type
- Class, Manufacturing
- altLabel
- solvent evaporation; thickened
A material-processing operation that removes solvent from a formulation by evaporation to increase its solids concentration or viscosity.
Solvent Free Shearing Graphitization Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventFreeShearingGraphitizationProcess- Type
- Class, Manufacturing
Overall synthesis route: shear mixing biomass + FeCl3 followed by pre-carbonization and high-T annealing under N2, then acid etching and washing.
Solvent Mass Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventMassRatio- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Ratio
A dimensionless characteristic expressing the stated ratio identified as Solvent Mass Ratio.
Solvent Mixture
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventMixture- Type
- Class, Matter
- altLabel
- mixed solvent; organic solvent mixture; water/isopropyl alcohol mixture
Solvent mixture used in catalyst ink preparation.
Solvent Physical Property Compilation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventPhysicalPropertyCompilation- Type
- Class, Process
- altLabel
- Table 1 solvent properties; solvent properties; solvent property calculation/compilation
An analysis that compiles measured, tabulated, or calculated solvent physical-property values together with their source, conditions, composition, and method provenance where available.
Solvent Physical Property Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventPhysicalPropertyDataset- Type
- Class, Data
- altLabel
- Table 1 dataset; Table 2 dataset; solvent property table
A dataset containing solvent physical property data generated by Rheology Measurement, Solvent Physical Property Compilation, and Solvent Property Lookup.
Solvent Property Lookup
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventPropertyLookup- Type
- Class, Process
- altLabel
- calculated solvent properties; solubility parameter lookup; solvent property
An information-retrieval analysis that obtains a solvent-property value from a referenced database, publication, or other source and records its applicable conditions.
Solvent Property Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventPropertyMeasurement- Type
- Class, Measurement
- altLabel
- properties of solvents; solvent physicochemical properties; surface tension measurement
A characterization measurement that determines specified solvent properties using methods appropriate to each observable.
Solvent To Carbon Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventToCarbonRatio- Type
- Class, Characteristic
- altLabel
- GCR; SCR; glycerol-to-carbon ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
The combined mass of the specified ink solvents divided by the mass of carbon support in the same catalyst-ink formulation.
Solvent To Water Volume Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventToWaterVolumeRatio- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeRatio
The volume of the identified nonaqueous solvent divided by the volume of water used to prepare the specified mixture.
Solvent Type
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SolventType- Type
- Class, Characteristic
- altLabel
- alcohol type; dispersing solvent; organic solvent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Categorical
A categorical characteristic identifying solvent type under the conditions and reference basis stated with the record.
Sonication
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Sonication- Type
- Class, Manufacturing
- altLabel
- sonicated in iced bath
A material-processing operation that applies ultrasonic acoustic energy to a material or liquid formulation to disperse constituents, disrupt aggregates, or promote mixing.
Sonication Amplitude Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SonicationAmplitudePercent- Type
- Class, Characteristic
- altLabel
- sonication amplitude; sonication amplitude (% of max power); sonication amplitude of maximum power
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
The sonotrode oscillation-amplitude setting expressed as a percentage of the maximum amplitude specified for the selected ultrasonic processor, probe and operating configuration.
Sonication Power
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SonicationPower- Type
- Class, Characteristic
- altLabel
- W; ultrasonic bath power; ultrasonic power
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Power | http://qudt.org/vocab/unit/W
A performance characteristic specifying the rate of energy transfer associated with sonication.
Sonication Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SonicationTime- Type
- Class, Characteristic
- altLabel
- probe sonication duration; sonicating for two minutes; ultrasonication time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with sonication.
Soybean Oil
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SoybeanOil- Type
- Class, Matter
Triglyceride feedstock for transesterification reaction.
Spacer Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpacerThickness- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the distance between the opposing bounding surfaces of spacer.
SPAEKC Hydrocarbon Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SPAEKCHydrocarbonIonomer- Type
- Class, Compatibility
- altLabel
- SPAEK-C
A material entity used for SPAEKC hydrocarbon ionomer.
SPAEKTM Hydrocarbon Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SPAEKTMHydrocarbonIonomer- Type
- Class, Matter
- altLabel
- SPAEK-TM
A sulfonated poly(arylene ether ketone) ionomer containing the symmetric tetramethyl-substituted structural units designated SPAEK-TM in the source.
Spanning Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpanningDistance- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying spanning distance under the conditions and reference basis stated with the record.
Spatial Resolution
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpatialResolution- Type
- Class, Characteristic
- altLabel
- tomography spatial resolution
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/MicroM
A quantitative characteristic specifying spatial resolution under the conditions and reference basis stated with the record.
Specific Activity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpecificActivity- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity
A property denoting specific activity.
Specific Area Activity At 0 p 9 V
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpecificAreaActivityAt0p9V- Type
- Class, Characteristic
- altLabel
- SA; specific activity; specific area activity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrentDensity
A property denoting specific (ECSA-normalized) catalytic activity estimated at 0.9 V_iR-free (A per cm2_Pt).
Specific Layer Weight
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpecificLayerWeight- Type
- Class, Characteristic
- altLabel
- coating weight
A property denoting the specific coating weight of a deposited catalyst layer.
Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Specification- Type
- Class, Specification
An information entity that prescribes or records a required, selected, or intended characteristic or setting.
- subclasses
- Catalyst Layer Composition Specification, Fabrication Design Specification, Ink Composition Specification, Ink Formulation Specification, Ink Recipe Definition, Material Specification, Microscopy Protocol Specification, Normalization basis, Parameter record, Printing Parameter Specification, Procedure Specification, Profilometry Protocol Specification, Protocol Specification, Reference scale, Spray Coating Parameter Specification, Surface Preparation Specification
Specimen
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Specimen- Type
- Class, Matter
A matter entity selected or prepared for observation, measurement, testing, or analysis.
- subclassOf / subPropertyOf
- Matter
Spectroscopic characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpectroscopicCharacteristic- Type
- Class, Characteristic
A property determined from the position, intensity, width, assignment, or shape of a spectral feature.
- subclasses
- Absorption Peak Wavelength, Binding Energy, Diffraction Peak Position 2 Theta, FTIR Wavenumber Range, IRSO 3 Stretching Peak Wavenumber, Laser Wavelength, Ni To SXRF Peak Area Ratio, Plasmon Peak Wavelength, Raman D Band Peak Wavenumber, Raman D Band Wavenumber, Raman G Band Peak Wavenumber, Raman G Band Wavenumber, Raman I 2 D To IG Ratio, Raman ID To IG Ratio, Raman IG To ID Ratio, SO 3 Stretch Wavenumber, UV Wavelength Range, Wavelength, Wavelength Cutoff, X Ray Wavelength, XRD Peak FWHM, XRD Peak Position 2 Theta
Spectroscopic Ellipsometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpectroscopicEllipsometer- Type
- Class, Instrument
- altLabel
- Horiba UVISEL Plus ellipsometer
Spectroscopic ellipsometer used to measure thin-film thickness and swelling vs RH.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0002683 (spectroscopic ellipsometer)
Spectroscopic ellipsometry
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpectroscopicEllipsometryMeasurement- Type
- Class, Measurement
- altLabel
- Spectroscopic Ellipsometry Measurement; spectroscopic ellipsometry; swelling measurement; thickness measurement
Spectroscopic ellipsometry used to measure film thickness and swelling fraction vs RH.
Spectroscopy instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpectroscopyInstrument- Type
- Class, Instrument
A measurement instrument used to acquire a response as a function of a spectral coordinate.
- subclasses
- EQE Spectrometer, ESR Spectrometer, F 19 NMR Instrument, FTIR Instrument, FTIR Spectrometer, Micro X Ray Fluorescence Spectrometer, Raman Spectrometer, Spectroscopic Ellipsometer, UV Vis NIR Spectrophotometer, UV Vis Spectrophotometer, UV Visible Spectrophotometer, XPS Instrument, Xrite Spectrophotometer
Spectroscopy measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpectroscopyMeasurement- Type
- Class, Measurement
A characterization measurement that determines a response as a function of energy, wavelength, frequency, mass-to-charge ratio, or another spectral coordinate.
- subclasses
- Electrochemical Impedance Spectroscopy Galvanostatic, Electrochemical Impedance Spectroscopy Potentiostatic, Electron spin resonance spectroscopy, Energy Dispersive X Ray Spectroscopy, F 19 NMR Mobility Measurement, FTIR Spectroscopy Measurement, Gas Chromatography Mass Spectrometry Measurement, Micro X Ray Fluorescence Measurement, NMR Measurement, Photoluminescence spectroscopy, Raman spectroscopy, Time Resolved Photoluminescence Measurement, UV Visible Spectroscopy Measurement, X-ray photoelectron spectroscopy
Spectrum dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpectrumDataset- Type
- Class, Data
A dataset that records a measured or computed response against a spectral coordinate.
SPEEK 64
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SPEEK64- Type
- Class, Matter
Sulfonated PEEK with degree of sulfonation ~64% (paper-specific material).
SPFSO 2 NHGCIOH Ionomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SPFSO2NHGCIOHIonomer- Type
- Class, Matter
- altLabel
- S-PFSO2NH-GCI-OH; short-side-chain perfluorinated cationic ionomer; soluble perfluorinated ionomer
Soluble short-side-chain perfluorinated cationic ionomer used as binder in catalyst ink and to cast anion-exchange membrane (AEM).
SPFSO 2 NHGCIOH Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SPFSO2NHGCIOHMembrane- Type
- Class, Matter
- altLabel
- anion exchange membrane (prepared from S-PFSO2NH-GCI-OH)
Anion exchange membrane cast from the synthesized SPFSO2NH-GCI-OH ionomer and used in the MEA.
Spin Casting
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpinCasting- Type
- Class, Manufacturing
- altLabel
- spin coating
Thin-film deposition process to cast polymer/ionomer films on substrates or IDEs.
Spin Coating Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpinCoatingSpeed- Type
- Class, Characteristic
- altLabel
- spin speed
- QUDT guidance
- http://qudt.org/vocab/quantitykind/RotationalSpeed
A rate characteristic specifying the speed associated with spin coating.
Spin Coating Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpinCoatingTime- Type
- Class, Characteristic
- altLabel
- spin time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with spin coating.
Spray Air Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SprayAirPressure- Type
- Class, Characteristic
- altLabel
- air flow pressure; air pressure; expulsion pressure
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A pressure characteristic specifying the pressure associated with spray air.
Mappings
- skos:broadMatch
https://openenergyplatform.org/ontology/oeo/OEO_00010454 (pressure)
Spray Angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SprayAngle- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Angle
A geometric characteristic specifying the angle associated with spray.
Spray Coater
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SprayCoater- Type
- Class, Instrument
- altLabel
- pulse-swirl-spray coater; spray system; ultrasonic spray system
An instrument corresponding to a spray coater and used in Spray Coating and Ultrasonic Spray Coating.
Spray Coating
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SprayCoating- Type
- Class, Manufacturing
- altLabel
- spray deposition; spraying; ultrasonic spray coating
Robotic spray deposition of ink in multiple passes onto heated substrate to evaporate solvent between passes.
Mappings
- skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000021 (spray coating)
Spray Coating Parameter Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SprayCoatingParameterSpecification- Type
- Class, Specification
- altLabel
- spray-coating parameters
A specification of selected spray-coating operating parameters, such as feed flow, atomizing-gas pressure, substrate temperature, nozzle distance, traversal speed, and deposition sequence.
Spray Coating Pass Count
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SprayCoatingPassCount- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Count
A count characteristic specifying the number of spray coating pass.
Spray Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SprayDistance- Type
- Class, Characteristic
- altLabel
- nozzle-to-electrode distance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/CentiM
A geometric characteristic specifying spray distance under the conditions and reference basis stated with the record.
Spray Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SprayDuration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/TimeDuration | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the duration of spray.
Spray Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SpraySpeed- Type
- Class, Characteristic
- altLabel
- nozzle speed
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Speed
A rate characteristic specifying the speed associated with spray.
Sputter Coater
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SputterCoater- Type
- Class, Instrument
- altLabel
- sputter coater (Quorum Q-150T ES)
Used to sputter-coat samples with gold before SEM.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0002122 (sputter coater)
Sputter Coating
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SputterCoating- Type
- Class, Manufacturing
- altLabel
- Pt sputter coating; gold sputter coating; sputtering deposition
Thin Pt film deposition (10 nm) on glass slides to create Pt/glass electrodes used as substrates for electrochemical tests.
Sputter Coating Current
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SputterCoatingCurrent- Type
- Class, Characteristic
- altLabel
- mA current
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricCurrent | http://qudt.org/vocab/unit/MilliA
An electrical characteristic specifying the electric current associated with sputter coating.
Sputter Coating Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SputterCoatingTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with sputter coating.
Square Wave Amplitude
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SquareWaveAmplitude- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
A quantitative characteristic specifying square wave amplitude under the conditions and reference basis stated with the record.
Square Wave Voltammetry
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SquareWaveVoltammetry- Type
- Class, Measurement
A measurement process that uses square wave voltammetry to determine Peak Current and Peak Potential using Electrochemical Workstation and generating Experiment Dataset.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0000040 (square-wave voltammetry)
Squeegee Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SqueegeePressure- Type
- Class, Characteristic
A pressure characteristic specifying the pressure associated with squeegee.
St Co DMAEMA Oligomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StCoDMAEMAOligomer- Type
- Class, Matter
- altLabel
- St-co-PDMAEMA copolymer
pH-responsive styrene-co-DMAEMA oligomer (sulfate end-capped) used to reduce and stabilize Pd nanoparticles and improve adhesion on PET.
Stability Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StabilityRatio- Type
- Class, Characteristic
- altLabel
- W
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting colloidal stability ratio (inverse of collision efficiency) from DLVO-type model.
Stage Tilt
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StageTilt- Type
- Class, Characteristic
- altLabel
- tilt angle
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PlaneAngle
A quantitative characteristic specifying stage tilt under the conditions and reference basis stated with the record.
Mappings
- skos:exactMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/sta_til_xxx-ad96bdf6eafa44c6b1be9ad9ef5af6f4-vp (Stage Tilt)
Standard Polymeric Dispersant 340 C
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StandardPolymericDispersant340C- Type
- Class, Compatibility
A material entity used for standard polymeric dispersant 340 C.
Static Testing Machine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StaticTestingMachine- Type
- Class, Instrument
- altLabel
- multifunctional static testing machine
Mechanical testing machine used for crush strength measurement.
Statistical characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StatisticalCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing a statistic, goodness-of-fit measure, uncertainty, deviation, or fitted coefficient.
Steam Activated Fe NC Catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SteamActivatedFeNCCatalyst- Type
- Class, Matter
- altLabel
- steam-activated Fe-N-C
Fe-N-C catalyst after steam activation; contains Fe3O4 nanoparticles and hierarchical meso/macropores.
Steam Activation Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SteamActivationProcess- Type
- Class, Manufacturing
- altLabel
- steam activation
A material-processing operation that treats a carbonaceous or catalyst precursor with steam at elevated temperature to alter pore structure, surface chemistry, or active phases.
Steam Pretreatment
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SteamPretreatment- Type
- Class, Manufacturing
- altLabel
- autoclave steam; steaming
Steaming MEA/CCM prior to operation to hydrate membrane/ionomer.
Stearic Acid Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StearicAcidMassFraction- Type
- Class, Characteristic
- altLabel
- Stearic fatty acid%
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting stearic acid mass fraction and determined in Gas Chromatography Measurement.
Steel Autoclave Reactor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SteelAutoclaveReactor- Type
- Class, Instrument
- altLabel
- batch reactor
High-pressure batch reactor used for aqueous-phase hydrogenation.
Stirring Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StirringSpeed- Type
- Class, Characteristic
- altLabel
- mixing speed; mixing speed (rpm); stirring rate
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency | http://qudt.org/vocab/unit/REV-PER-MIN
A rate characteristic specifying the speed associated with stirring.
Stirring Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StirringTime- Type
- Class, Characteristic
- altLabel
- mixing time (min); rolling time; stirred overnight
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with stirring.
Storage Modulus
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StorageModulus- Type
- Class, Characteristic
- altLabel
- G'; elastic modulus; shear storage modulus
- QUDT guidance
- http://qudt.org/vocab/quantitykind/StorageModulus
A property denoting storage modulus (G′) characterizing ink elasticity under oscillatory shear.
Storage Modulus Increase Onset Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StorageModulusIncreaseOnsetTime- Type
- Class, Characteristic
- altLabel
- significant increase of the storage modulus started occurring after; time sweep onset
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Duration | http://qudt.org/vocab/unit/HR
A property denoting time at which storage modulus begins to increase significantly in time sweep (indicating geopolymerization progress).
Storage Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StorageTemperature- Type
- Class, Characteristic
- altLabel
- subzero storage temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with storage.
Storage Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StorageTime- Type
- Class, Characteristic
- altLabel
- frozen time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with storage.
Strain Gauge Factor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StrainGaugeFactor- Type
- Class, Characteristic
- altLabel
- SFG; gauge factor
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting sensitivity metric for strain sensor, defined from relative impedance change vs strain amplitude.
Strain Gauge Sensing Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StrainGaugeSensingMeasurement- Type
- Class, Measurement
- altLabel
- impedance-based strain measurement; strain sensing; strain sensor test
Measurement protocol where sensor impedance is monitored while applying cyclic mechanical strain (simulated physiological conditions).
Strain Gauge Sensor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StrainGaugeSensor- Type
- Class, Matter
- altLabel
- interdigitated strain sensor; strain gauge; strain-responsive sensor
Printed sensor device (interdigitated electrode structure) fabricated from PDL/AgNW ink for strain measurement via impedance changes.
- subclassOf / subPropertyOf
- Device
Strip Spacing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StripSpacing- Type
- Class, Characteristic
- altLabel
- line spacing; spacing d
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying strip spacing under the conditions and reference basis stated with the record.
Structural characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StructuralCharacteristic- Type
- Class, Characteristic
A property describing the internal arrangement, connectivity, phase structure, or architecture of matter.
Strut Thickness
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StrutThickness- Type
- Class, Characteristic
- altLabel
- strut size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the distance between the opposing bounding surfaces of strut.
Stylus Profilometry Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StylusProfilometryMeasurement- Type
- Class, Measurement
- altLabel
- stylus profiler; stylus profilometry
Stylus profilometry used to reconstruct 3D thickness/roughness maps over full 5×5 cm coating (after corrections).
Styrene Monomer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#StyreneMonomer- Type
- Class, Matter
- altLabel
- styrene (St)
Styrene monomer used in free-radical copolymerization.
SU 8 Epoxy Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SU8EpoxyResin- Type
- Class, Matter
- altLabel
- SU-8; SU-8 2002
Photoreactive bisphenol A-based epoxy resin used as binder in QD composites/inks.
SU 8 Weight Percent In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SU8WeightPercentInInk- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic expressing the stated fractional composition identified as SU 8 Weight Percent In Ink.
Sublimation Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SublimationTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with sublimation.
Substrate Heat Treatment
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SubstrateHeatTreatment- Type
- Class, Manufacturing
- altLabel
- heat treatment; heat treatment in air; post-heat treatment
A manufacturing process for substrate heat treatment using Titanium Substrate with Oven and producing Titanium Oxide Layer.
Mappings
- skos:broadMatch
https://w3id.org/pmd/co/PMD_0000779 (heat treatment)
Substrate Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SubstrateTemperature- Type
- Class, Characteristic
- altLabel
- hot-plate temperature; spray deposition temperature; spray temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermodynamicTemperature | http://qudt.org/vocab/unit/K
http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with substrate.
Suction Feed Airbrush
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SuctionFeedAirbrush- Type
- Class, Instrument
- altLabel
- siphon-feed airbrush; suction-fed airbrush
Specific airbrush feed mechanism used for spray coating; compared against gravity-feed type.
Sudan I
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SudanI- Type
- Class, Matter
Photo absorber used in DLP elastomer resin.
Sulfolene
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Sulfolene- Type
- Class, Matter
A cyclic unsaturated sulfone of the dihydrothiophene-1,1-dioxide family.
Sulfonate Coverage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SulfonateCoverage- Type
- Class, Characteristic
- altLabel
- Θ (SO3- coverage on Pt)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SurfaceCoverage
The fraction of the specified platinum adsorption sites occupied by sulfonate species under stated electrode and electrolyte conditions.
Sulfonated Poly Ether Ether Ketone
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SulfonatedPolyEtherEtherKetone- Type
- Class, Matter
- altLabel
- sPEEK
Sulfonated poly(ether ether ketone) used as membrane material and electrode binder.
Sulfonated Polysulfone
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SulfonatedPolysulfone- Type
- Class, Matter
A polysulfone polymer functionalized with sulfonic-acid or sulfonate groups.
Sulfonated Silica Nanosheet
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SulfonatedSilicaNanosheet- Type
- Class, Matter
- altLabel
- S–SN
Silane-functionalized silica nanosheets bearing sulfonic groups.
Sulfur Atomic Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SulfurAtomicPercent- Type
- Class, Characteristic
- altLabel
- S atomic percent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AtomicPercent
A property denoting atomic percent of sulfur from XPS quantitative composition (no close match in ontology).
Sulfur Weight Percent In Catalyst Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SulfurWeightPercentInCatalystLayer- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting eDS-reported normalized sulfur concentration in catalyst layer (wt.%); S attributed to PFSA/Nafion.
Sulfuric Acid
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SulfuricAcid- Type
- Class, Matter
- altLabel
- sulfuric acid dopant; sulfuric acid electrolyte
Sulfuric acid electrolyte used for CV (1 M H2SO4).
Sulfuric Acid Mass Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SulfuricAcidMassFraction- Type
- Class, Characteristic
- altLabel
- % mass sulfuric acid; mass fraction H2SO4; mass fraction sulfuric acid
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A property denoting sulfuric acid mass fraction.
Support Material
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SupportMaterial- Type
- Class, Matter
A material that carries or anchors another material or functional phase and provides structural support or an interface for its operation.
Supported metal catalyst
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SupportedMetalCatalyst- Type
- Class, Matter
An electrocatalyst in which catalytically active metal particles are dispersed on a supporting material.
Surface Basicity Change Delta P Hf
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceBasicityChangeDeltaPHf- Type
- Class, Characteristic
- altLabel
- surface basicity change; ΔpHf
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DeltaPH
A property denoting ΔpHf = pHf(wetted) − pHf(pristine); negative implies more acidic surface after treatment.
Surface Basicity Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceBasicityMeasurement- Type
- Class, Measurement
- altLabel
- surface acido-basicity measurement
A measurement process that determines changes in surface basicity from pH measurements after contact between a material and solution.
Surface characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceCharacteristic- Type
- Class, Characteristic
A property describing a surface, interface, or surface-mediated behavior.
- subclasses
- Agglomerate Surface Area, BET Surface Area Nitrogen, BET Surface Area Octane Adsorption, BET Surface Area Water Vapor, Carbon-support water contact angle, Catalyst Particle Surface Area, CCL effective ionomer coverage, CCL hydrophilic-pore mean contact angle, CCL hydrophobic-pore mean contact angle, CCL mean contact angle, CCL primary-pore specific surface area, CCL secondary-pore specific surface area, CCL total-pore specific surface area, Contact Angle, Contact Angle Decrease 0 to 200 s, Coverage Relaxation Rate Constant, Electrochemically Active Surface Area, Ideal hydrophilic ionomer contact angle, Ideal hydrophobic ionomer contact angle, Ionomer Coverage On Carbon, Ionomer Coverage On Platinum, Ionomer Patch Surface Coverage, Ionomer-coated pore-wall contact angle, Micropore Surface Area, Pattern Surface Coverage, Physical Surface Area Pt Catalyst, Platinum-carbon pore-wall contact angle, Platinum-surface water contact angle, Pore Surface Area Fraction Below 20 nm, QSDFT Surface Area Nitrogen, Sulfonate Coverage, Surface Hydrophilicity Ratio, Theoretical Metal Surface Area, Water-to-nitrogen adsorption-capacity ratio
Surface Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceConcentration- Type
- Class, Characteristic
- altLabel
- mol/cm2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountPerArea
A property denoting surface concentration and determined in Cyclic Voltammetry.
Surface Film Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceFilmResistance- Type
- Class, Characteristic
- altLabel
- R_f; film resistance; surface oxide film resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaSpecificResistance
A property denoting High-frequency resistance component assigned to surface oxide film (from equivalent circuit fits), normalized by geometric area.
Surface Hydrophilicity Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceHydrophilicityRatio- Type
- Class, Characteristic
- altLabel
- hydrophilicity ratio; surface hydrophobicity/hydrophilicity
A property denoting metric defined as ratio of BET areas from water vapor and nitrogen adsorption.
Surface Preparation Specification
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfacePreparationSpecification- Type
- Class, Specification
A specification of substrate surface-preparation operations and selected conditions, such as cleaning sequence, annealing temperature and duration, and specimen geometry.
Surface Roughness Ra
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceRoughnessRa- Type
- Class, Characteristic
- altLabel
- Average Ra; HL; Ra
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting arithmetic average surface roughness (Ra) of MPL measured by stylus profilometry.
Surface Roughness Rq
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceRoughnessRq- Type
- Class, Characteristic
- altLabel
- Rq
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A property denoting surface roughness quantified as RMS height (Rq) of the coating profile.
Surface Roughness Sa
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceRoughnessSa- Type
- Class, Characteristic
- altLabel
- Sa
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ArealSurfaceRoughness
A property denoting areal arithmetic mean height (Sa) roughness metric measured on microfilament surfaces.
Surface tension
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceTension- Type
- Class, Characteristic
- altLabel
- surface tension of water at 353 K
- notation
- gamma
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SurfaceTension | http://qudt.org/vocab/unit/J-PER-M2 | Value-free QUDT guidance for Surface tension; the curated source reports [J/m^2]. Profile context: The ITC profile requires the surface tension of liquid water at 353 K for the capillary flooding calculation.
Surface tension of liquid water at 353 K used to determine capillary flooding behavior in catalyst-layer pores.
Mappings
- skos:exactMatch
http://www.ontology-of-units-of-measure.org/resource/om-2/SurfaceTension (surface tension)
Surface To Volume Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceToVolumeRatio- Type
- Class, Characteristic
- altLabel
- SIRT/DART; Surface/Volume [nm²/nm³]
- QUDT guidance
- http://qudt.org/vocab/quantitykind/InverseLength
A property denoting surface area divided by volume for catalyst network morphology (from tomography).
Surface Topography Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfaceTopographyDataset- Type
- Class, Data
Processed 3D surface topography (height map) reconstructed from profilometry or microscopy data.
Surfactant Solution Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SurfactantSolutionConcentration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A composition characteristic specifying the amount of surfactant solution per stated quantity of mixture or solution.
Suspension intrinsic-viscosity coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SuspensionIntrinsicViscosityCoefficient- Type
- Class, Characteristic
A dimensionless coefficient in a suspension-viscosity model that quantifies the first-order contribution of dispersed-particle volume fraction to relative viscosity.
Swelling Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SwellingDataset- Type
- Class, Data
- altLabel
- swelling vs RH data
Dataset of swelling fraction vs RH and dopant concentration from ellipsometry.
Swelling Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SwellingFraction- Type
- Class, Compatibility
- altLabel
- fractional swelling; nearly 0.8 swelling fraction; swelling ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting fractional swelling (dimensionless) of thin films as a function of RH and dopant concentration.
Synchronous Thermal Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SynchronousThermalAnalyzer- Type
- Class, Instrument
Synchronous thermal analyzer used for TG–DSC measurements.
Synthesis process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SynthesisProcess- Type
- Class, Manufacturing
A material-processing operation that produces a material through chemical, electrochemical, or physical formation.
Syringe Driver
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SyringeDriver- Type
- Class, Instrument
- altLabel
- motor-driven system; syringe driver YSP-201
Mechanical drive that moves the syringe piston to start/stop ink flow (enables FOD mode).
Syringe Pump
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SyringePump- Type
- Class, Instrument
- altLabel
- syringe pump (NE1000)
Syringe pump controlling ink flow rate during spray coating.
Syringe Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#SyringeVolume- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by syringe.
Tabular dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TabularDataset- Type
- Class, Data
A dataset whose records are organized into rows and columns.
Tack O Scope Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TackOScopeInstrument- Type
- Class, Instrument
- altLabel
- Tack-O-Scope BV MAV/EL100
Instrument used to measure ink tack (U.T. scale).
Tack Value
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TackValue- Type
- Class, Compatibility
- altLabel
- tack value (U.T.)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting tack value and determined in Rheology Measurement.
Tafel Polarization Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TafelPolarizationMeasurement- Type
- Class, Measurement
- altLabel
- Tafel polarization
Tafel polarization on symmetric dummy cell to extract exchange current density and limiting current density.
Tafel Slope
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TafelSlope- Type
- Class, Characteristic
- altLabel
- TS; Tafel slope (mV/dec); Tafel slope b
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
A property denoting tafel slope and determined in MEAPolarization, Linear Sweep Voltammetry, and Tafel Slope Step Analysis.
Tafel Slope Step Analysis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TafelSlopeStepAnalysis- Type
- Class, Compatibility
- altLabel
- TS; Tafel slope analysis; Tafel step analysis
An analysis that evaluates or transforms scientific information through tafel slope step analysis.
Target Substrate Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TargetSubstrateDistance- Type
- Class, Characteristic
- altLabel
- distance from catalyst pellet
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying target substrate distance under the conditions and reference basis stated with the record.
Teflon Lined Autoclave
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TeflonLinedAutoclave- Type
- Class, Instrument
Autoclave reactor used for hydrothermal synthesis at 180°C.
TEM Defocus
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TEMDefocus- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A quantitative characteristic specifying tem defocus under the conditions and reference basis stated with the record.
TEM Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TEMInstrument- Type
- Class, Instrument
- altLabel
- HR TEM; JEM-2100 (HR) TEM; TEM
An electron microscope that uses electrons transmitted through an electron-transparent specimen to obtain images, diffraction patterns, or other spatially resolved structural information.
Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Temperature- Type
- Class, Characteristic
- altLabel
- cell temperature; operating temperature; room temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermodynamicTemperature | http://qudt.org/vocab/unit/K
http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with temperature.
Template Removal Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TemplateRemovalDuration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the duration of template removal.
Temporal characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TemporalCharacteristic- Type
- Class, Characteristic
A quantitative characteristic describing duration, time, interval, temporal position, or temporal rate.
- subclasses
- Annealing Duration, Annealing Time, Bake Time, Ball Milling Time, Break Time Between Spray Cycles, Bulk Sedimentation Time, Centrifugation Time, Cold Start Survival Time, Conditioning Time, Contamination Time, Curing Time, DEM Time Step, Deposition Time, Development Time, Dialysis Bath Change Interval, Dialysis Time, Discharge Time, Droplet Penetration Time, Drying Duration, Drying Time, Dwell Time, Exposure Time, Fuel Cell Operation Time, Gel Point Time, Hold Time, Hot Press Time, Humidifier Equilibration Time, Incubation Time, Ink Aging Time, Ink Mixing Time, Ink Stability Time, Ink Storage Stability Duration, Ink Storage Time, Irradiation Time, Laser Pulse Length, Ligand Exchange Reaction Time, Pellet Annealing Time, Photoluminescence Decay Time, Polarization Point Duration, Polymerization Duration, Potential Ramp Time, Pre Carbonization Time, Pre Purge Time, Pre Reduction Time, Print Job Duration, Printable Working Time Max, Printable Working Time Min, Pulse Duration, Pyrolysis Time, Reaction Time, Rest Time, Shear Mixing Rest Time, Sonication Time, Spin Coating Time, Spray Duration, Sputter Coating Time, Stirring Time, Storage Time, Sublimation Time, Template Removal Duration, Test Duration, Total Acquisition Time, Ultrasonication Time, UV Exposure Time, UV Irradiation Time, Vacuum Drying Time, Viscosity Recovery High Shear Duration, Viscosity Recovery Time, Wetting Dip Time, Working Time Duration, Working Time Frequency, XTM Scan Time
Tensile Strength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TensileStrength- Type
- Class, Characteristic
- altLabel
- tensile stress at break
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Stress
A property denoting ultimate tensile strength of membrane (undoped/doped).
Tensile Test
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TensileTestMeasurement- Type
- Class, Measurement
- altLabel
- INSTRON 3344 tensile test; Instron tensile test; Tensile Test Measurement; tensile test
Mechanical tensile testing to obtain tensile strength, elongation, and Young’s modulus.
Mappings
- skos:exactMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ten_tes_xxx-17d3573b2c024e45852539dad7393228-vp (Tensile Test) - skos:exactMatch
https://w3id.org/polymat/TensileTest (Tensile test)
Tensile Test Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TensileTestInstrument- Type
- Class, Instrument
- altLabel
- INSTRON 3344; Instron 5966; Instron tensile test instrument
Universal testing machine used for tensile measurements.
Tensiometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Tensiometer- Type
- Class, Instrument
- altLabel
- CBVP-A3 surface tensiometer; KRÜSS K8551 tensiometer
An instrument that determines liquid surface tension or liquid–liquid interfacial tension from a measured mechanical or geometric response.
Test Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TestDuration- Type
- Class, Characteristic
- altLabel
- stability duration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the duration of test.
Tetrabutylammonium Acetate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TetrabutylammoniumAcetate- Type
- Class, Matter
Acetate additive used with AA to control ligand exchange reactivity.
Tetrabutylammonium Hydroxide
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TetrabutylammoniumHydroxide- Type
- Class, Matter
Base/additive (TBAOH) used to modify Nafion dispersion and catalyst-ink aggregation behavior.
Tetraethoxysilane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Tetraethoxysilane- Type
- Class, Matter
A material entity corresponding to a tetraethoxysilane and used as an input in Silica Coating Process.
Tetrahydrofuran
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Tetrahydrofuran- Type
- Class, Matter
Organic solvent used to dissolve CoTMPP precursor during catalyst preparation.
Tetrahydrofurfural
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Tetrahydrofurfural- Type
- Class, Matter
Hydrogenation product (detected as minor product).
Tetrahydrofurfural Selectivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TetrahydrofurfuralSelectivity- Type
- Class, Characteristic
- altLabel
- selectivity to THFAL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/FractionPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting selectivity to tetrahydrofurfural (percent).
Tetrahydrofurfuryl Alcohol
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TetrahydrofurfurylAlcohol- Type
- Class, Matter
Deeper hydrogenation product of furfuryl alcohol.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_137944 (tetrahydrofurfuryl alcohol)
Tetrahydrofurfuryl Alcohol Selectivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TetrahydrofurfurylAlcoholSelectivity- Type
- Class, Characteristic
- altLabel
- selectivity to THFOL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/FractionPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting selectivity to tetrahydrofurfuryl alcohol (percent).
Theoretical Metal Surface Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TheoreticalMetalSurfaceArea- Type
- Class, Characteristic
- altLabel
- SA; SA(Pt); maximum theoretical metal surface area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerMass
A property denoting theoretical metal surface area calculated from crystallite size and density assumptions (m²/g).
Thermal Analysis Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalAnalysisDataset- Type
- Class, Data
Dataset of DSC and TG curves during thermal treatment.
Thermal characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalCharacteristic- Type
- Class, Characteristic
A property describing temperature, heat transfer, thermal response, or thermally induced change.
- subclasses
- Annealing Temperature, Bake Temperature, Carbon Nanotube Complete Decomposition Temperature, Carbon Nanotube Decomposition Onset Temperature, Coating Temperature, Cryo Ultramicrotome Temperature, Drying Temperature, Evaporation Temperature, Homogenization Temperature, Hot Press Temperature, Humidifier Temperature, Interdiffusion Onset Temperature, Operating Temperature, Pellet Annealing Temperature, Phase Transition Temperature, Pre Carbonization Temperature, Pre Reduction Temperature, Pyrolysis Temperature, Reaction Temperature, Reduction Completion Temperature, Reduction Onset Temperature, Sintering Temperature, Storage Temperature, Substrate Temperature, Temperature, Thermal Conductivity, Thermal Event Peak Temperature, Water Bath Temperature
Thermal Conductivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalConductivity- Type
- Class, Characteristic
- altLabel
- k_i; through-plane thermal conductivity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThermalConductivity
A transport characteristic specifying the electrical or ionic conductivity of thermal.
Mappings
- skos:exactMatch
http://purl.allotrope.org/ontologies/result#AFR_0002392 (thermal conductivity) - skos:exactMatch
http://www.ontology-of-units-of-measure.org/resource/om-2/ThermalConductivity (thermal conductivity)
Thermal Crosslinking
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalCrosslinking- Type
- Class, Manufacturing
- altLabel
- thermal drying; thermal treatment in air
Thermal treatment used to crosslink PAA/PVA via ester bonds.
Thermal Curing Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalCuringProcess- Type
- Class, Manufacturing
- altLabel
- thermal curing
Thermal curing schedule applied after printing to cross-link PCS prior to pyrolysis (vacuum oven ramps/holds).
Thermal Decomposition Electrode Preparation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalDecompositionElectrodePreparation- Type
- Class, Manufacturing
- altLabel
- thermal decomposition; thermal decomposition method
A manufacturing process for thermal decomposition electrode preparation using Cobalt Hexadecanethiolate, Nickel Butanethiolate, and Carbon Cloth Substrate.
Thermal Event Peak Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalEventPeakTemperature- Type
- Class, Characteristic
- altLabel
- DSC peak temperature; endothermic peak temperature; exothermic peak temperature
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A property denoting dSC peak temperatures indicating melting, decomposition, or curing events (e.g., 60°C, 222°C, 245°C, 309°C, 316°C).
Thermal measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalMeasurement- Type
- Class, Measurement
A characterization measurement that determines thermal response or a temperature-dependent characteristic.
Thermal Oxidation Of Aluminum Film
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalOxidationOfAluminumFilm- Type
- Class, Manufacturing
- altLabel
- calcining in air to oxidize aluminum
Heat treatment in air to convert deposited aluminum film to alumina buffer layer.
Thermal treatment process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalTreatmentProcess- Type
- Class, Manufacturing
A material-processing operation that controls temperature over time to dry, cure, anneal, calcine, sinter, or otherwise modify matter.
Thermal-processing instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermalProcessingInstrument- Type
- Class, Instrument
A manufacturing instrument that heats, cools, dries, freezes, cures, anneals, calcines, or sinters matter under controlled conditions.
- subclasses
- Automatic Plunge Freezer, Capillary Furnace, Freeze Drier, Heat Gun, Heated Vacuum Table, Hot Blower, Hot Plate, Hot Press, Muffle Furnace, Oven, Tube Furnace
Thermanox Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermanoxSubstrate- Type
- Class, Matter
- altLabel
- thermanox print substrate
Polymer substrate used for coating/printing and cell culture; pretreated with oxygen plasma before coating.
Thermogravimetric analysis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermogravimetricAnalysisMeasurement- Type
- Class, Measurement
- altLabel
- Thermogravimetric Analysis Measurement; thermogravimetric analysis
A thermal measurement that records specimen mass as a function of temperature or time during a controlled thermal program under a specified atmosphere.
Mappings
- skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000072 (thermogravimetric analysis)
Thermogravimetric Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThermogravimetricAnalyzer- Type
- Class, Instrument
An instrument corresponding to a thermogravimetric analyzer and used in Thermogravimetric Analysis Measurement.
Mappings
- skos:exactMatch
https://w3id.org/polymat/ThermogravimetricAnalyzer (Thermogravimetric analyzer)
Thermometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Thermometer- Type
- Class, Instrument
- altLabel
- IR thermometer
Temperature sensor used to monitor printing environment.
Thickness Difference Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThicknessDifferencePercent- Type
- Class, Compatibility
- altLabel
- Dmicro3D; thickness difference (%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessRatioPercent | http://qudt.org/vocab/unit/PERCENT
A property denoting percent difference between thickness estimates from different methods/simulations.
Thixotropy Hysteresis Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThixotropyHysteresisArea- Type
- Class, Characteristic
- altLabel
- thixotropy (area between up/down curves)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ThixotropyHysteresisArea
The integral of the difference between the specified ascending and descending rheological response curves over the stated shear-rate range in a controlled up-and-down sweep.
Thixotropy Recovery Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThixotropyRecoveryFraction- Type
- Class, Characteristic
- altLabel
- % recovery; recovery fraction; thixotropic recovery
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DimensionlessFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting fraction of original storage modulus recovered after a high-strain breakdown step (thixotropic recovery metric).
Three D Laser Scanning Microscopy Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThreeDLaserScanningMicroscopyMeasurement- Type
- Class, Measurement
- altLabel
- laser scanning microscopy
Confocal 3D laser scanning microscopy on ~0.25 cm² central region to measure surface topography.
Three Dimensional Graphene Nanosheets
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThreeDimensionalGrapheneNanosheets- Type
- Class, Matter
description=Porous three-dimensional graphene nanosheets (3D-GNS) used as cathode catalyst/additive; synthesized via sacrificial support method (SSM).
Three Interval Thixotropy Test
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThreeIntervalThixotropyTest- Type
- Class, Measurement
- altLabel
- thixotropy test; viscosity recovery test
Rheology protocol with low-strain, high-strain, then recovery steps used to quantify thixotropy/structure recovery.
Three Point Flexural Strength Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThreePointFlexuralStrengthMeasurement- Type
- Class, Measurement
- altLabel
- three-point flexure
Three-point flexure test on pyrolyzed bars to obtain flexural strength.
Threshold Aggregate Diameter
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThresholdAggregateDiameter- Type
- Class, Compatibility
- altLabel
- threshold aggregate size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A morphological characteristic that represents threshold aggregate diameter for a material, component, process, measurement, or hydrogen-electrochemical system.
Through Plane Electronic Conductivity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThroughPlaneElectronicConductivity- Type
- Class, Characteristic
- altLabel
- electrical conductivity; tp; σ_cl
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricalConductivity
A property denoting through plane electronic conductivity and determined in Through Plane Electronic Conductivity Measurement.
Through Plane Electronic Conductivity Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThroughPlaneElectronicConductivityMeasurement- Type
- Class, Measurement
- altLabel
- electrical conductivity measurement; through-plane conductivity test; through-plane tests
A measurement process that uses through plane electronic conductivity measurement to determine Through Plane Electronic Conductivity, Scaling Exponent T, and Electrical Percolation Threshold Volume Fraction using Micro Ohm Meter, Gold Plated Probes, and Pneumatic Jack and generating Conductivity Dataset.
Through Plane Thermal Conductivity Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThroughPlaneThermalConductivityMeasurement- Type
- Class, Measurement
- altLabel
- ex-situ thermal conductivity; thermal conductivity apparatus
Description (paper-context): Ex-situ through-plane measurement of catalyst-layer thermal conductivity using a custom heat-flux/temperature-gradient rig (Fourier-law-based).
Mappings
- skos:broadMatch
http://purl.allotrope.org/ontologies/process#AFP_0002206 (thermal conductivity measurement)
Through-Plane Gas Transport Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThroughPlaneGasTransportMeasurement- Type
- Class, Measurement
- altLabel
- through-plane gas transport
A measurement process that uses Through-Plane gas transport measurement to determine Local Oxygen Transport Resistance, Effective Oxygen Diffusion Coefficient, and Mass Transport Resistance using Through-Plane Transport Cell and Environmental Chamber and generating Experiment Dataset.
Through-Plane Transport Cell
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ThroughPlaneTransportCell- Type
- Class, Instrument
An instrument corresponding to a Through-Plane transport cell and used in Through-Plane Gas Transport Measurement and Through Plane Thermal Conductivity Measurement.
Ti Cl 4 Surface Treatment
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TiCl4SurfaceTreatment- Type
- Class, Manufacturing
- altLabel
- TiCl4 treatment
Surface treatment of TiO2 films in TiCl4 solution (40 mM) at 70°C for 30 min (twice).
Time Resolved Photoluminescence Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TimeResolvedPhotoluminescenceMeasurement- Type
- Class, Measurement
- altLabel
- time-resolved PL; time-resolved PL decay
Time-resolved photoluminescence measurement used to compare decay lifetimes of composites.
Titanium Oxide Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TitaniumOxideLayer- Type
- Class, Matter
- altLabel
- TiO2 layer; native oxide layer
A material entity corresponding to a titanium oxide layer and used as an input in Dye Sensitization Process, Ti Cl 4 Surface Treatment, and Ultrasonic Deposition Process.
Titanium Screen
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TitaniumScreen- Type
- Class, Matter
- altLabel
- Ti-screen
Titanium screen used as anode support/current collector.
Titanium Substrate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TitaniumSubstrate- Type
- Class, Matter
- altLabel
- Ti substrate; titanium plate
A material entity corresponding to a titanium substrate and used as an input in Spray Coating, X Ray Diffraction Measurement, and Substrate Heat Treatment.
Tokuyama A 201 Membrane
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TokuyamaA201Membrane- Type
- Class, Matter
- altLabel
- A201; Tokuyama; Tokuyama A201®
Tokuyama A201, a commercial anion-exchange membrane grade used as an ion-conducting separator in alkaline electrochemical cells.
Toluene
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Toluene- Type
- Class, Matter
Solvent used during purification/precipitation steps in ligand exchange.
Tomographic Projection Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TomographicProjectionDataset- Type
- Class, Data
- altLabel
- projection dataset; raw tomography projections
A dataset containing raw tomographic projection images generated during neutron tomography, synchrotron X-ray tomography, X-ray computed tomography, and related tomography measurements before correction, reconstruction, or segmentation.
Tomographic Reconstruction Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TomographicReconstructionDataset- Type
- Class, Data
- altLabel
- 3D tomographic reconstruction; reconstructed tomograph
A dataset containing reconstructed tomographic volumes produced from raw projection data in neutron tomography, synchrotron X-ray tomography, X-ray computed tomography, and related tomography measurements, and used for segmentation, quantitative analysis, and related post-processing.
Tomography dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TomographyDataset- Type
- Class, Data
An image dataset containing tomographic projections, reconstructed sections, or reconstructed volumetric data.
Tomography instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TomographyInstrument- Type
- Class, Instrument
An imaging instrument used to acquire projections or sections for tomographic reconstruction.
Tomography measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TomographyMeasurement- Type
- Class, Measurement
An imaging measurement that acquires projections or sections used to reconstruct the internal spatial structure of a specimen.
Torque Wrench
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TorqueWrench- Type
- Class, Instrument
- altLabel
- assembling torque
An instrument corresponding to a torque wrench and used in MEAAssembly Process.
Tortuosity Calculation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TortuosityCalculation- Type
- Class, Process
- altLabel
- geometric tortuosity calculation
An analysis that calculates a specified geometric or transport-derived tortuosity descriptor from a reconstructed geometry, a transport measurement, or a physical model.
Tortuosity Factor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TortuosityFactor- Type
- Class, Characteristic
- altLabel
- TauFactor tortuosity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A property denoting a tortuosity factor derived from tomography-based transport analysis of reconstructed porous fuel-cell microstructures.
Tortuosity Porosity Exponent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TortuosityPorosityExponent- Type
- Class, Compatibility
- altLabel
- power-law exponent; power-law fit exponent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A morphological characteristic that represents tortuosity porosity exponent for a material, component, process, measurement, or hydrogen-electrochemical system.
Total Acquisition Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TotalAcquisitionTime- Type
- Class, Characteristic
- altLabel
- total scan time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time
A temporal characteristic specifying the elapsed time associated with total acquisition.
Total Gas Diffusion Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TotalGasDiffusionResistance- Type
- Class, Characteristic
- altLabel
- GDL oxygen transport resistance; R_total; gas diffusion resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Resistance | http://qudt.org/vocab/unit/OHM
A property denoting total oxygen/gas diffusion resistance derived from limiting current density vs pressure.
Total Ink Formulation Mass
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TotalInkFormulationMass- Type
- Class, Characteristic
- altLabel
- total mass
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Mass
A quantitative characteristic specifying the mass of total ink formulation.
Total Internal Resistance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TotalInternalResistance- Type
- Class, Characteristic
- altLabel
- MFC-CICo; Rint; internal resistance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricalResistance | http://qudt.org/vocab/unit/OHM
A property denoting overall internal resistance from semi-empirical polarization fit (includes bulk+interfacial).
Total Ionomer To Carbon Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TotalIonomerToCarbonRatio- Type
- Class, Characteristic
- altLabel
- I_total/C; total ionomer/carbon ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A dimensionless characteristic expressing the stated ratio identified as Total Ionomer To Carbon Ratio.
Total pore volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TotalPoreVolume- Type
- Class, Characteristic
- altLabel
- ITC total pore volume
- notation
- Vpores
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SpecificVolume | http://qudt.org/vocab/unit/M3-PER-GM | Value-free QUDT guidance for Total pore volume; the curated source reports [m^3/gC]. Values are normalized per unit carbon mass. Profile context: For the ITC profile, this is the total primary- and secondary-pore volume of the ionomer-free platinum-on-carbon structure normalized per unit carbon mass.
Total volume of primary and secondary pores in the ionomer-free platinum-on-carbon structure per unit mass of carbon.
Total Porosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TotalPorosity- Type
- Class, Characteristic
- altLabel
- % porosity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting total porosity (open plus closed) of a porous body, electrode microstructure, or reconstructed 3D specimen.
Mappings
- skos:broadMatch
http://purl.obolibrary.org/obo/PATO_0000973 (porosity) - skos:broadMatch
https://w3id.org/pmd/co/PMD_0020005 (porosity)
Total Pt Loading
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TotalPtLoading- Type
- Class, Characteristic
- altLabel
- total Pt loading (anode+cathode)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassPerArea
The sum of the anode and cathode platinum masses divided by the common geometric active area of the fuel cell.
Tough Point Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ToughPointResin- Type
- Class, Matter
Commercial photocurable resin used as DLP plastic.
Transesterification Performance Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TransesterificationPerformanceMeasurement- Type
- Class, Measurement
Assessment of catalytic performance for biodiesel production via soybean oil transesterification; quantified by GC-FID (EN14103).
Transmission electron microscopy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TransmissionElectronMicroscopyImaging- Type
- Class, Measurement
- altLabel
- TEM; TEM imaging; Transmission Electron Microscopy Imaging; transmission electron microscopy
A measurement process that uses transmission electron microscopy imaging to determine Interplanar Spacing, Mean Particle Size, and Carbon Nanotube Outer Diameter using TEM Instrument and generating Microstructure Image Dataset.
Mappings
- skos:broadMatch
http://edamontology.org/topic_0611 (Electron microscopy) - skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0000080 (transmission electron microscopy) - skos:exactMatch
http://www.bioassayontology.org/bao#BAO_0000455 (transmission electron microscopy) - skos:exactMatch
https://w3id.org/emmo/domain/characterisation-methodology/chameo#TransmissionElectronMicroscopy (TransmissionElectronMicroscopy) - skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000078 (transmission electron microscopy)
Transmission Line Model Analysis
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TransmissionLineModelAnalysis- Type
- Class, Process
- altLabel
- transmission line model
A analysis representing transmission line model analysis under the conditions and reference basis stated with the record.
Transparency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Transparency- Type
- Class, Compatibility
- altLabel
- Transparency% (A*); Transparency% (B*)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting transparency and determined in Xrite Optical Property Measurement.
Transport characteristic
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TransportCharacteristic- Type
- Class, Characteristic
A property describing the transport of matter, charge, momentum, or energy through a material or system.
- subclasses
- Anode Gas Volumetric Flow Rate, Cathode Gas Volumetric Flow Rate, Charge Transfer Plus Mass Transport Resistance, Constrictivity, Effective Ionic Conductivity, Effective Oxygen Diffusion Coefficient, Electronic Conductivity Anisotropy Ratio, Electronic Conductivity Loss Percent, Ethylene Volumetric Flow Rate, Gas Flow Rate, Gas Volumetric Flow Rate, Geodesic Tortuosity, Hydrogen Permeability, Hydrogen Volumetric Flow Rate, In Plane Electronic Conductivity, Ionomer Oxygen Transport Resistance Component, Ionomer Thin Film Permeability, Knudsen Diffusivity, Knudsen Oxygen Transport Resistance Component, Liquid Flow Rate, Mass Flow Rate, Mass Transport Loss Parameter M, Mass Transport Loss Parameter N, Mass Transport Resistance, Mass Transport Resistance Increase Percent, Mass Transport Resistance Reduction Percent, Methanol Permeability, Microporous Layer Permeability, Molecular Diffusivity In Air, Neutron Flux, Nitrogen Source Volumetric Flow Rate, Nitrogen Volumetric Flow Rate, Oxygen Diffusion Coefficient In Ionomer, Oxygen Permeability, Oxygen Permeability Factor Vs Nafion, Pressure Dependent Gas Diffusion Resistance, Pressure Independent Gas Diffusion Resistance, Relative Oxygen Permeability, Relative Proton Conductivity, Solution Conductivity, Through Plane Electronic Conductivity, Total Gas Diffusion Resistance, Triiodide Diffusion Coefficient, Water Diffusion Coefficient, Water Vapor Volumetric Flow Rate
Transport measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TransportMeasurement- Type
- Class, Measurement
A characterization measurement that determines the transport of mass, charge, momentum, or energy through a material or system.
Triethylamine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Triethylamine- Type
- Class, Matter
Catalyst used in LCE ink formulation.
Triiodide Concentration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TriiodideConcentration- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentration
A composition characteristic specifying the amount of triiodide per stated quantity of mixture or solution.
Triiodide Diffusion Coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TriiodideDiffusionCoefficient- Type
- Class, Characteristic
- altLabel
- D; diffusion coefficient of triiodide
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DiffusionCoefficient
A property denoting estimated diffusion coefficient of I3- in the electrolyte from limiting current density in Tafel analysis.
Trimethoxysilylpropyl Methacrylate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TrimethoxysilylpropylMethacrylate- Type
- Class, Matter
Silane coupling agent bearing methacrylate group used to graft photosensitive groups onto MK resin via sol-gel reaction.
Trimethylolpropane Triacrylate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TrimethylolpropaneTriacrylate- Type
- Class, Matter
Triacrylate crosslinker added to UV-MK to adjust viscosity and increase UV curing rate.
Triple Phase Boundary Layer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TriplePhaseBoundaryLayer- Type
- Class, Matter
- altLabel
- TPB; triple-phase boundary (TPB) layer
Triple-phase boundary region (pore/proton conductor/electron conductor) in catalyst layer affected by grafted polymer.
Tripropylamine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Tripropylamine- Type
- Class, Matter
Tripropylamine (TPA) used with acetone as nitrogen source in bubbling feed.
Triton X 100 Surfactant
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TritonX100Surfactant- Type
- Class, Matter
- altLabel
- Triton X-100; surfactant (Triton X-100)
Nonionic surfactant Triton X-100 used to aid dispersion in MPL inks.
True Density
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TrueDensity- Type
- Class, Compatibility
- altLabel
- skeletal density; skeleton density; ρ_t
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Density
A property denoting true/skeleton density measured by helium pycnometry on finely milled samples.
Tube Furnace
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TubeFurnace- Type
- Class, Instrument
- altLabel
- Lindberg Blue furnaces; tube furnace (CM Furnaces 1830-10VF); two-furnace AP-CVD system
Tube furnace used for pyrolysis under flowing argon.
Turnover Frequency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#TurnoverFrequency- Type
- Class, Characteristic
- altLabel
- TOF
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A property denoting turnover frequency.
Mappings
- skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0007817 (turnover frequency)
Ubbelohde Viscometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UbbelohdeViscometer- Type
- Class, Instrument
An instrument corresponding to an ubbelohde viscometer and used in Solvent Property Measurement.
Ultra Small Angle X Ray Scattering Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UltraSmallAngleXRayScatteringMeasurement- Type
- Class, Measurement
- altLabel
- X-ray scattering; in-situ X-ray scattering; ultra-small-angle X-ray scattering
USAXS/SAXS scattering measurements on inks to quantify agglomeration/fractal dimension.
Ultrasonic Bath
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UltrasonicBath- Type
- Class, Instrument
- altLabel
- cooling bath; ultra-sonication bath; water bath
An instrument corresponding to an ultrasonic bath and used in Catalyst Ink Preparation and Ink Ultrasonication.
Ultrasonic Deposition Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UltrasonicDepositionProcess- Type
- Class, Manufacturing
- altLabel
- ultrasonic deposition; ultrasonically deposited
Ultrasonic-assisted coating/deposition steps used to attach TiO2, then porphyrin P and silane S onto PET fabric.
Ultrasonic Liquid Exfoliation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UltrasonicLiquidExfoliation- Type
- Class, Manufacturing
- altLabel
- liquid-assisted exfoliation; liquid-phase exfoliation
A material-processing operation that applies ultrasound to a solid dispersed in liquid to separate it into thinner sheets or flakes.
Ultrasonic Spray Coating
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UltrasonicSprayCoating- Type
- Class, Manufacturing
- altLabel
- ultrasonically spray coated
A coating process in which ultrasonic excitation atomizes a liquid feed into droplets that are transported to a substrate to form a deposited film or layer.
Ultrasonic Spray Coating System
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UltrasonicSprayCoatingSystem- Type
- Class, Instrument
- altLabel
- ultrasonic spray coating
Ultrasonic spray coater used for layer deposition (Prism 400)
Ultrasonication Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UltrasonicationTime- Type
- Class, Characteristic
- altLabel
- probe sonication time; sonication time; ultrasonic bath time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with ultrasonication.
Ultrasonicator
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Ultrasonicator- Type
- Class, Instrument
- altLabel
- horn type ultrasonicator; ultrasonic bath; ultrasonic probe
An instrument corresponding to an ultrasonicator and used in Catalyst Ink Preparation, Ink Ultrasonication, and Ultra Small Angle X Ray Scattering Measurement.
Uniaxial Pressing Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UniaxialPressingProcess- Type
- Class, Manufacturing
- altLabel
- uniaxial press
A material-processing operation that compacts a powder or green body by pressure applied primarily along one axis in a die or mold.
Unit
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Unit- Type
- Class, Unit
An information entity that provides an agreed reference magnitude for expressing a quantity value.
Universal Testing Machine
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UniversalTestingMachine- Type
- Class, Instrument
- altLabel
- QJ211 universal testing machine; universal material testing machine
Testing machine used for compressive strength measurement.
Upper Potential Limit
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UpperPotentialLimit- Type
- Class, Characteristic
- altLabel
- upper limit; upper potential; upper potential value
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/V
An electrochemical characteristic specifying upper potential limit under the conditions and reference basis stated with the record.
Urea
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Urea- Type
- Class, Matter
Nitrogen precursor used for N-doping during synthesis of GU and FU carbon catalysts.
UV Assisted Direct Ink Writing
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVAssistedDirectInkWriting- Type
- Class, Manufacturing
DIW process augmented with in-situ UV irradiation to cure extruded filaments and retain shape; treated as a specialized form of DirectInkWriting.
UV Bandwidth
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVBandwidth- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the width of uv.
UV Curing Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVCuringProcess- Type
- Class, Manufacturing
- altLabel
- UV curing
Free-radical polymerization of acrylate/methacrylate groups under UV irradiation forming crosslinked network.
UV Detector
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVDetector- Type
- Class, Instrument
Detector used to monitor UV light energy during curing experiments.
UV Exposure Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVExposureTime- Type
- Class, Characteristic
- altLabel
- exposure time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with uv exposure.
Mappings
- skos:broadMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/exp_tim_xxx-d06c7708430f446398944d57f6465b3c-vp (Exposure Time)
UV Irradiance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVIrradiance- Type
- Class, Characteristic
- altLabel
- UV light intensity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Irradiance
A quantitative characteristic specifying uv irradiance under the conditions and reference basis stated with the record.
UV Irradiation Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVIrradiationTime- Type
- Class, Characteristic
- altLabel
- UV exposure time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with uv irradiation.
UV Scan Speed
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVScanSpeed- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/SpectralScanRate
A rate characteristic specifying the speed associated with uv scan.
UV Vis NIR Spectrophotometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVVisNIRSpectrophotometer- Type
- Class, Instrument
- altLabel
- JASCO V-670 UV–Vis NIR; Shimadzu Solid Spec-2700; UV–vis–near infrared recording spectrophotometer
UV–vis–NIR spectrophotometer used to measure CCM optical transmittance (400–700 nm).
UV Vis Spectrophotometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVVisSpectrophotometer- Type
- Class, Instrument
- altLabel
- UV–vis spectrometer
Instrument to acquire UV–vis absorption spectra during polymerization tracking.
UV Visible Spectrophotometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVVisibleSpectrophotometer- Type
- Class, Instrument
- altLabel
- UV-Vis spectrometer; UV–Vis spectrophotometer
Instrument for UV-Vis absorption spectra.
UV Visible Spectroscopy Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVVisibleSpectroscopyMeasurement- Type
- Class, Measurement
- altLabel
- UV spectra; UV-visible tests; UV–vis
UV–vis spectroscopy used to track monomer polymerization kinetics.
UV Wavelength Range
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVWavelengthRange- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/WavelengthRange
A spectroscopic characteristic specifying uv wavelength range under the conditions and reference basis stated with the record.
UVDIW Printer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVDIWPrinter- Type
- Class, Instrument
Custom UV-assisted direct-ink writing apparatus with 3-axis stage and UV sources on both sides of the needle.
UVMK Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVMKResin- Type
- Class, Matter
- altLabel
- UV-MK
Photosensitive MK-TMSPM resin formulation with photoinitiators (no TMPTA).
UVMK T Resin
- IRI
https://w3id.org/h2kg/hydrogen-ontology#UVMK_T_Resin- Type
- Class, Matter
- altLabel
- UV-MK-T
UV-MK resin with added TMPTA crosslinker; selected for printing.
Vacuum Chamber Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VacuumChamberPressure- Type
- Class, Characteristic
- altLabel
- vacuum pressure
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A pressure characteristic specifying the pressure associated with vacuum chamber.
Vacuum Drying
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VacuumDrying- Type
- Class, Manufacturing
- altLabel
- VD; dried under vacuum; vacuum-dried
Drying catalyst layers on decal films under vacuum (contrasted with atmospheric drying).
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0001557 (vacuum drying)
Vacuum Drying Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VacuumDryingTime- Type
- Class, Characteristic
- altLabel
- drying time; solvent evaporation time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/MIN
A temporal characteristic specifying the elapsed time associated with vacuum drying.
Mappings
- skos:broadMatch
https://w3id.org/nfdi4cat/voc4cat_0008206 (drying time)
Vacuum Encapsulation Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VacuumEncapsulationProcess- Type
- Class, Manufacturing
- altLabel
- vacuum-encapsulated
Sealing specimens under vacuum in quartz capillaries for high-temperature XRD/tomography.
Vacuum Filtration Process
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VacuumFiltrationProcess- Type
- Class, Manufacturing
- altLabel
- vacuum filtration
Vacuum filtration used to make free-standing graphene films.
Vacuum Moulder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VacuumMoulder- Type
- Class, Instrument
Vacuum moulding/degassing apparatus used for slurry degassing and impregnation under vacuum.
Vacuum Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VacuumPressure- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A pressure characteristic specifying the pressure associated with vacuum.
Mappings
- skos:exactMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/vac_pre_xxx-0e3383a3004647868136b88ad085c456-vp (Vacuum Pressure)
Vapor Pressure
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VaporPressure- Type
- Class, Characteristic
- altLabel
- P; vapour pressure
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A property denoting vapor pressure and determined in Solvent Physical Property Compilation and Solvent Property Measurement.
Mappings
- skos:narrowMatch
http://purl.allotrope.org/ontologies/quality#AFQ_0000275 (saturation vapor pressure (quality))
Veeco Dektak 8 Contact Profilometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VeecoDektak8ContactProfilometer- Type
- Class, Instrument
- altLabel
- Veeco Dektak 8; contact profilometer; stylus profilometer
Contact stylus profilometer used for thickness/roughness mapping.
Vermiculite
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Vermiculite- Type
- Class, Matter
- altLabel
- Verm; vermiculite clay mineral
Natural clay mineral precursor for silica nanosheets (SN).
Viscosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Viscosity- Type
- Class, Characteristic
- altLabel
- apparent viscosity; dynamic viscosity; ink viscosity
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DynamicViscosity
http://qudt.org/vocab/quantitykind/DynamicViscosity
A property denoting dynamic viscosity of solvents, ionomer dispersions, or catalyst inks (often shear-rate dependent).
Viscosity Recovery High Shear Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ViscosityRecoveryHighShearDuration- Type
- Class, Characteristic
- altLabel
- high shear duration; viscosity recovery
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Duration | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the duration of viscosity recovery high shear.
Viscosity Recovery Shear Rate High
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ViscosityRecoveryShearRateHigh- Type
- Class, Characteristic
- altLabel
- high shear rate; viscosity recovery
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A rheological characteristic representing viscosity recovery shear rate high under the conditions and reference basis stated with the record.
Viscosity Recovery Shear Rate Low
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ViscosityRecoveryShearRateLow- Type
- Class, Characteristic
- altLabel
- low shear rate; viscosity recovery
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A rheological characteristic representing viscosity recovery shear rate low under the conditions and reference basis stated with the record.
Viscosity Recovery Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ViscosityRecoveryTime- Type
- Class, Characteristic
- altLabel
- recovery time; viscosity recovery
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Duration | http://qudt.org/vocab/unit/SEC
A property denoting characteristic time for ink to recover high viscosity after cessation of high shear (post-extrusion).
Visible Light Lamp
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VisibleLightLamp- Type
- Class, Instrument
- altLabel
- visible-light irradiation source
Light source used for visible-light irradiation during photodegradation/self-cleaning tests (paper mentions 300 W lamp).
Visual Inspection Stability Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VisualInspectionStabilityMeasurement- Type
- Class, Measurement
- altLabel
- visual inspection
Qualitative stability test based on visually observed phase separation / settling time.
Voltage Sensor
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VoltageSensor- Type
- Class, Instrument
- altLabel
- plug-in sensors; voltage sensors
Voltage sensing hardware used to record fuel cell voltage during aging tests.
Volumetric ink deposition rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VolumetricInkDepositionRate- Type
- Class, Characteristic
A volumetric-rate characteristic specifying the volume of ink deposited per unit time by a printing or dispensing process.
Voxel Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VoxelSize- Type
- Class, Characteristic
- altLabel
- nm/voxel; pixel size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
The physical edge lengths of a voxel in a reconstructed three-dimensional image, specified along the three coordinate directions; for isotropic voxels the common edge length may be reported as a single value.
Vulcan XC 72 R Carbon Black
- IRI
https://w3id.org/h2kg/hydrogen-ontology#VulcanXC72RCarbonBlack- Type
- Class, Matter
- altLabel
- Vulcan XC-72R; XC-72R; carbon black
Commercial carbon black support used as model catalyst-layer carbon.
Warburg Coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WarburgCoefficient- Type
- Class, Characteristic
- altLabel
- W; Warburg
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Resistance | http://qudt.org/vocab/unit/OHM
A property denoting warburg coefficient and determined in Electrochemical Impedance Spectroscopy Potentiostatic and Electrochemical Impedance Spectroscopy Galvanostatic.
Warburg Impedance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WarburgImpedance- Type
- Class, Characteristic
- altLabel
- Zw
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricResistance
A property denoting warburg impedance and determined in Electrochemical Impedance Spectroscopy Potentiostatic.
Water
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Water- Type
- Class, Matter
- altLabel
- DI water; deionized water; ultrapure water
A solvent representing water under the conditions and reference basis stated with the record.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHEBI_15377 (Water) - skos:narrowMatch
http://purl.obolibrary.org/obo/ENVO_00002006 (liquid water)
Water Activated Electrochemically Active Surface Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterActivatedElectrochemicallyActiveSurfaceArea- Type
- Class, Compatibility
- altLabel
- ECSA_water; liquid water activated ECSA; water activated ECSA
- QUDT guidance
- http://qudt.org/vocab/quantitykind/AreaPerMass
A property denoting water activated electrochemically active surface area and determined in Carbon Monoxide Stripping Voltammetry.
Water Assisted Low Pressure CVD
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterAssistedLowPressureCVD- Type
- Class, Manufacturing
- altLabel
- CVD with ethylene/hydrogen and water vapor
Chemical vapor deposition growth process for MWCNTs using ethylene and hydrogen with controlled water vapor at ~800°C under low pressure.
Water Bath Temperature
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterBathTemperature- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Temperature | http://qudt.org/vocab/unit/DEG_C
A thermal characteristic specifying the temperature associated with water bath.
Water Content Fraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterContentFraction- Type
- Class, Compatibility
- altLabel
- water content
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A composition characteristic that represents water content fraction for a material, component, process, measurement, or hydrogen-electrochemical system.
Water Content Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterContentMeasurement- Type
- Class, Measurement
- altLabel
- water content
A measurement process that uses water content measurement to determine Water Content Fraction and Water Uptake Indicator using Karl Fischer Titrator.
Water Diffusion Coefficient
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterDiffusionCoefficient- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DiffusionCoefficient
A property denoting dynamic diffusion coefficient for water uptake in PFSA membranes (Fickian diffusion coefficient).
Water Drop Volume
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterDropVolume- Type
- Class, Characteristic
- altLabel
- μL
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Volume
A geometric characteristic specifying the three-dimensional volume occupied by water drop.
Water Mass Fraction In Ink
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterMassFractionInInk- Type
- Class, Compatibility
- altLabel
- ink H2O content
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction
A composition characteristic that represents water mass fraction in ink for a material, component, process, measurement, or hydrogen-electrochemical system.
Water Mass Fraction In Solvent Mixture
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterMassFractionInSolventMixture- Type
- Class, Characteristic
- altLabel
- water fraction; water fraction in solvent; water-rich solvent
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A composition characteristic expressing the stated fractional composition identified as Water Mass Fraction In Solvent Mixture.
Water Storage Space Calculation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterStorageSpaceCalculation- Type
- Class, Process
- altLabel
- theoretical water storage calculation
An analysis that estimates the volume available to store water in an assembly or layer from a defined accessible-volume model and, when required, expresses that volume per stated reference area.
Water To Ethanol Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterToEthanolRatio- Type
- Class, Compatibility
- altLabel
- ethanol:water 1:1; water/ethanol ratio; water/ethanol ratio 3:2
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A composition characteristic that represents water to ethanol ratio for a material, component, process, measurement, or hydrogen-electrochemical system.
Water To Isopropanol Molar Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterToIsopropanolMolarRatio- Type
- Class, Characteristic
- altLabel
- [Water]/[IPA] (molar ratio)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarRatio
http://qudt.org/vocab/quantitykind/MolarRatio
A dimensionless characteristic expressing the stated ratio identified as Water To Isopropanol Molar Ratio.
Water To Isopropanol Volume Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterToIsopropanolVolumeRatio- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
The volume of water divided by the volume of isopropanol used to prepare the specified solvent mixture.
Water To N Propanol Volume Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterToNPropanolVolumeRatio- Type
- Class, Characteristic
- altLabel
- H2O/alcohol volume ratio; H2O/n-PA volume ratio; water:propanol ratio
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeRatio
The volume of water divided by the volume of n-propanol used to prepare the specified solvent mixture.
Water To N Propanol Weight Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterToNPropanolWeightRatio- Type
- Class, Characteristic
- altLabel
- water/propan-1-ol weight ratio; water/propan-1-ol weight ratio = 4.32
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassRatio
A dimensionless characteristic expressing the stated ratio identified as Water To N Propanol Weight Ratio.
Water Uptake Indicator
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterUptakeIndicator- Type
- Class, Compatibility
- altLabel
- water uptake; λ_HNN4; λ_HNN9
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
A property denoting water uptake indicator and determined in Water Vapor Adsorption Measurement, Literature Review Synthesis, and Molecular Dynamics Simulation.
Water Uptake Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterUptakeRatio- Type
- Class, Compatibility
- altLabel
- water uptake; water uptake (wt%)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting ratio of maximum adsorption volumes from water vapor vs N2 adsorption.
Water Vapor Adsorption Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterVaporAdsorptionMeasurement- Type
- Class, Measurement
- altLabel
- water vapor adsorption
Water vapor adsorption to estimate hydrophilicity and water uptake.
Water Vapor Concentration Ppm
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterVaporConcentrationPpm- Type
- Class, Compatibility
- altLabel
- water vapour concentration
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless
A composition characteristic that represents water vapor concentration ppm for a material, component, process, measurement, or hydrogen-electrochemical system.
Water Vapor Volumetric Flow Rate
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterVaporVolumetricFlowRate- Type
- Class, Characteristic
- altLabel
- water vapor (0–35 cm3/min); water vapor flow
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumetricFlowRate
A transport characteristic specifying the quantity of water vapor volumetric passing a reference boundary per unit time.
Water-to-nitrogen adsorption-capacity ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WaterToNitrogenAdsorptionCapacityRatio- Type
- Class, Characteristic
A dimensionless sorption characteristic equal to the ratio of a material's maximum water-vapor adsorption capacity to its maximum nitrogen adsorption capacity under the stated conditions.
Wavelength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#Wavelength- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the length of wavelength.
Mappings
- skos:narrowMatch
http://www.bioassayontology.org/bao#BAO_0000566 (excitation wavelength)
Wavelength Cutoff
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WavelengthCutoff- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A spectroscopic characteristic specifying wavelength cutoff under the conditions and reference basis stated with the record.
Web Tension
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WebTension- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Force
A quantitative characteristic specifying web tension under the conditions and reference basis stated with the record.
Weight Average Molecular Weight
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WeightAverageMolecularWeight- Type
- Class, Characteristic
- altLabel
- Mw
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MolarMass
A property denoting weight average molecular weight and determined in Gel Permeation Chromatography Measurement.
Weight Increase After Impregnation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WeightIncreaseAfterImpregnation- Type
- Class, Characteristic
- altLabel
- weight increase; weight increased by
- QUDT guidance
- http://qudt.org/vocab/quantitykind/MassFraction | http://qudt.org/vocab/unit/PERCENT
A property denoting percent weight increase after colloidal silica immersion/impregnation.
Wet Co Impregnation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WetCoImpregnation- Type
- Class, Manufacturing
- altLabel
- co-impregnation
Catalyst preparation step to load Ni and P precursors onto porous alumina carrier from aqueous solution.
Wetting Dip Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WettingDipTime- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/SEC
A temporal characteristic specifying the elapsed time associated with wetting dip.
Wetting Solvent To Water Volume Ratio
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WettingSolventToWaterVolumeRatio- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeRatio
The volume of the identified wetting solvent divided by the volume of water used in the electrode-prewetting mixture.
Workflow profile
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WorkflowProfile- Type
- Class, WorkflowProfile
An information entity that specifies expected entities, relations, cardinalities, and validation rules for a scientific workflow record.
Working Distance
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WorkingDistance- Type
- Class, Characteristic
- altLabel
- SEM working distance; objective-to-specimen distance; pole-piece distance
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length | http://qudt.org/vocab/unit/MilliM
A geometric characteristic specifying working distance under the conditions and reference basis stated with the record.
Mappings
- skos:exactMatch
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/wor_dis_xxx-a4f624127a304e46bce69d6b214bb831-vp (Working Distance)
Working Time Deformation
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WorkingTimeDeformation- Type
- Class, Characteristic
- altLabel
- working time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Dimensionless | http://qudt.org/vocab/unit/PERCENT
The amplitude of the oscillatory shear deformation applied during a rheological working-time evaluation.
Working Time Duration
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WorkingTimeDuration- Type
- Class, Characteristic
- altLabel
- working time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Duration | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the duration of working time.
Working Time Frequency
- IRI
https://w3id.org/h2kg/hydrogen-ontology#WorkingTimeFrequency- Type
- Class, Characteristic
- altLabel
- working time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Frequency
A frequency characteristic specifying the repetition rate or oscillation frequency associated with working time.
X Ray Beam Energy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRayBeamEnergy- Type
- Class, Characteristic
- altLabel
- beam energy
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PhotonEnergy
An energy characteristic specifying the energy associated with x ray beam.
Mappings
- skos:broadMatch
https://w3id.org/nfdi4cat/voc4cat_0007108 (beam energy)
X Ray Computed Tomography Imaging
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRayComputedTomographyImaging- Type
- Class, Measurement
- altLabel
- X-ray CT; X-ray computed tomography; X-ray tomography
3D imaging measurement to quantify pore structure, porosity, and tortuosity in catalyst layers.
X Ray Computed Tomography Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRayComputedTomographyMeasurement- Type
- Class, Measurement
- altLabel
- X-ray CT; X-ray tomography; x-ray computed tomography
A measurement process that uses X-ray computed tomography to acquire tomographic projections and reconstructed volumes for porous electrochemical and related material systems.
X Ray CT Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRayCTInstrument- Type
- Class, Instrument
- altLabel
- X-ray CT; X-ray computed tomography
An instrument configuration for synchrotron and related X-ray computed tomography workflows that acquires tomographic projections and supports reconstructed-volume analysis for porous electrochemical and related material systems.
X Ray Diffractometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRayDiffractometer- Type
- Class, Instrument
- altLabel
- Panalytical Empyrean diffractometer; Philips PW1830 diffractometer; X'Pert PRO diffractometer
X-ray diffractometer used to acquire diffraction patterns during catalyst and electrode material characterization.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0002105 (X-ray diffractometer)
X Ray Microscope
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRayMicroscope- Type
- Class, Instrument
- altLabel
- Zeiss 3D X-ray microscope
An instrument corresponding to a X ray microscope and used in X Ray Computed Tomography Measurement.
X Ray Photoelectron Spectrometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRayPhotoelectronSpectrometer- Type
- Class, Compatibility
- altLabel
- Multilab 2000 spectrometer; XPS spectrometer; photoelectron spectrometer
An instrument that irradiates a specimen with X-rays and measures emitted photoelectron kinetic energies to obtain elemental and chemical-state information about the near-surface region.
X Ray Wavelength
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRayWavelength- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Length
A geometric characteristic specifying the length of x ray.
X-ray diffraction
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRayDiffractionMeasurement- Type
- Class, Measurement
- altLabel
- X Ray Diffraction Measurement; X-ray diffraction; XRD; XRD measurement
X-ray diffraction measurement used to characterize PEMFC-relevant catalyst powders and related electrode materials by recording diffraction patterns and deriving peak positions, peak widths, Pt crystallite size, and theoretical metal surface area.
Mappings
- skos:exactMatch
http://purl.obolibrary.org/obo/CHMO_0000156 (X-ray diffraction) - skos:exactMatch
https://w3id.org/emmo/domain/characterisation-methodology/chameo#XrayDiffraction (XrayDiffraction) - skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000077 (X-ray diffraction) - skos:exactMatch
https://w3id.org/pmd/co/PMD_0001016 (x-ray diffraction process)
X-ray photoelectron spectroscopy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRayPhotoelectronSpectroscopyMeasurement- Type
- Class, Measurement
- altLabel
- X Ray Photoelectron Spectroscopy Measurement; X-ray photoelectron spectroscopy
Surface chemical analysis measurement used to characterize PEMFC-relevant catalyst powders, catalyst inks, ionomers, and related surface chemistries by acquiring XPS spectra and quantifying elemental composition and chemical-state information.
Mappings
- skos:exactMatch
https://w3id.org/nfdi4cat/voc4cat_0000076 (X-ray photoelectron spectroscopy)
Xenon Lamp
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XenonLamp- Type
- Class, Instrument
Visible-light irradiation source for photocatalytic tests (UV cutoff filter at 400 nm).
XPS Analysis Area
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XPSAnalysisArea- Type
- Class, Characteristic
- altLabel
- analysis area; analysis spot area
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Area
A geometric characteristic specifying the area associated with xps analysis.
XPS Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XPSDataset- Type
- Class, Data
- altLabel
- XPS elemental composition; XPS elemental composition tables; XPS spectra
A dataset containing XPS spectra and related quantification outputs generated by X Ray Photoelectron Spectroscopy Measurement for PEMFC-relevant surface-chemistry characterization.
XPS Instrument
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XPSInstrument- Type
- Class, Instrument
- altLabel
- X-ray photoelectron spectrometer; XPS spectrometer; photoelectron spectrometer
Instrument for X-ray photoelectron spectroscopy used to acquire XPS spectra and quantification data for PEMFC-relevant surface-chemistry characterization.
XPS Pass Energy
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XPSPassEnergy- Type
- Class, Characteristic
- altLabel
- analyzer pass energy; pass energy
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Energy | http://qudt.org/vocab/unit/EV
An energy characteristic specifying the energy associated with xps pass.
XPS Take Off Angle
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XPSTakeOffAngle- Type
- Class, Characteristic
- altLabel
- emission angle; photoelectron take-off angle; take-off angle
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PlaneAngle | http://qudt.org/vocab/unit/DEG
A geometric characteristic specifying the angle associated with xps take off.
XRD Pattern Dataset
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRDPatternDataset- Type
- Class, Data
- altLabel
- XRD pattern; XRD patterns
Dataset of X-ray diffraction patterns or diffractograms generated during catalyst and electrode material characterization.
XRD Peak FWHM
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRDPeakFWHM- Type
- Class, Characteristic
- altLabel
- FWHM
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PlaneAngle
A property denoting xRD peak full width at half maximum (degrees).
XRD Peak Position 2 Theta
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRDPeakPosition2Theta- Type
- Class, Characteristic
- altLabel
- peak position (2θ)
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PlaneAngle
A property denoting xRD peak position expressed in 2θ angle (degrees).
XRD Step Size
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRDStepSize- Type
- Class, Characteristic
- altLabel
- step size
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PlaneAngle
A geometric characteristic specifying xrd step size under the conditions and reference basis stated with the record.
Mappings
- skos:broadMatch
http://purl.allotrope.org/ontologies/result#AFR_0000950 (step size)
XRD Two Theta End
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRDTwoThetaEnd- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PlaneAngle
A quantitative characteristic specifying xrd two theta end under the conditions and reference basis stated with the record.
XRD Two Theta Start
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XRDTwoThetaStart- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/PlaneAngle
A quantitative characteristic specifying xrd two theta start under the conditions and reference basis stated with the record.
Xrite Optical Property Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XriteOpticalPropertyMeasurement- Type
- Class, Measurement
- altLabel
- X-rite
A measurement process that uses xrite optical property measurement to determine Transparency, Delta S, and Color Difference Delta Eab using Xrite Spectrophotometer.
Xrite Spectrophotometer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XriteSpectrophotometer- Type
- Class, Instrument
- altLabel
- EXACT–PANTONE X-rite spectrophotometer
Spectrophotometer used to measure optical properties (ΔE, etc.) of printed films (Section 2.4.1.5).
XTM Scan Time
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XTMScanTime- Type
- Class, Characteristic
- altLabel
- scan time
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Time | http://qudt.org/vocab/unit/HR
A temporal characteristic specifying the elapsed time associated with xtm scan.
XY Moving Stage
- IRI
https://w3id.org/h2kg/hydrogen-ontology#XYMovingStage- Type
- Class, Matter
- altLabel
- computer-controlled X–Y stage; custom-built XY stage; rastering stage
A positioning component that translates a mounted specimen, substrate, or tool along two independently controlled orthogonal axes.
Yield Stress
- IRI
https://w3id.org/h2kg/hydrogen-ontology#YieldStress- Type
- Class, Characteristic
- altLabel
- gel strength; shear yield stress; tau_y
- QUDT guidance
- http://qudt.org/vocab/quantitykind/Pressure
A property denoting stress at which ink transitions from solid-like to liquid-like behavior (taken at G'/G" crossover).
Mappings
- skos:exactMatch
https://w3id.org/pmd/co/PMD_0080171 (yield stress)
Youngs Modulus
- IRI
https://w3id.org/h2kg/hydrogen-ontology#YoungsModulus- Type
- Class, Characteristic
- altLabel
- elastic modulus
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElasticModulus
A property denoting young’s modulus of membrane (undoped/doped).
Zero Shear Viscosity
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ZeroShearViscosity- Type
- Class, Characteristic
- QUDT guidance
- http://qudt.org/vocab/quantitykind/DynamicViscosity
A property denoting zero shear viscosity and determined in Rheology Measurement.
Zeta Potential
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ZetaPotential- Type
- Class, Characteristic
- altLabel
- electrokinetic potential; surface zeta potential; ζ-potential
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
A property denoting zeta potential of colloidal particles in ink; indicator of dispersion stability.
Zeta Potential Analyzer
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ZetaPotentialAnalyzer- Type
- Class, Instrument
- altLabel
- Malvern Zetasizer Nano ZS90 (zeta potential)
An instrument that measures an electrokinetic response, commonly electrophoretic mobility, and estimates zeta potential using an appropriate electrokinetic model.
Zeta Potential Measurement
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ZetaPotentialMeasurement- Type
- Class, Measurement
- altLabel
- electrophoretic mobility measurement; surface zeta potential; ζ-potential measurement
Measurement of zeta potential to assess colloidal stability of catalyst inks.
Zeta Potential Stability Threshold
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ZetaPotentialStabilityThreshold- Type
- Class, Characteristic
- altLabel
- mV stability threshold; mV threshold
- QUDT guidance
- http://qudt.org/vocab/quantitykind/ElectricPotential | http://qudt.org/vocab/unit/MilliV
A specified magnitude of zeta potential used as an operational electrostatic-stability criterion for a dispersion under stated medium, pH, ionic-strength and assessment conditions.
ZIF 67
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ZIF67- Type
- Class, Matter
- altLabel
- zeolitic imidazolate framework-67
Metal–organic framework precursor (ZIF-67) used as template/precursor to generate NCNTFs support during pyrolysis.
Zirconia Milling Balls
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ZirconiaMillingBalls- Type
- Class, Matter
- altLabel
- zirconia balls
Zirconia (ZrO2) spherical milling media added during ball milling to enhance dispersion (paper uses 3 mm spheres).
Zirconium Diboride Powder
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ZirconiumDiboridePowder- Type
- Class, Matter
- altLabel
- ZrB2 powder; zirconium diboride (ZrB2)
ZrB2 ceramic powder used as UHTC phase in DIW inks; average particle size reported before/after milling.
Zr B 2 Volume Percent
- IRI
https://w3id.org/h2kg/hydrogen-ontology#ZrB2VolumePercent- Type
- Class, Compatibility
- QUDT guidance
- http://qudt.org/vocab/quantitykind/VolumeFraction
A geometric characteristic that represents zr b 2 volume percent for a material, component, process, measurement, or hydrogen-electrochemical system.